Does the EA390 Engine Burn Oil?

1 Answers
DeEva
07/29/25 6:14pm
EA390 engines generally burn oil. Below is relevant information about the EA390: 1. Features: The EA390 engine, globally debuted in SAIC Volkswagen models, not only achieves a perfect balance between economy, environmental friendliness, and reliability but also elevates power performance and driving experience to new heights. 4. Overview: Since the EA390 is an imported engine, it might seem unfamiliar. The EA390 belongs to the VR6 naturally aspirated engine series, available in different displacements such as 3.0L, 3.2L, and 3.6L. It employs direct fuel injection technology, with 4 valves per cylinder and a very narrow engine angle (only 10°-15°), making it structurally compact. The Volkswagen Teramont is equipped with the EA390 engine.
Was this review help?
15
2
Share
More Forum Discussions

How to Lubricate Slow Window Roll-Up?

Window roll-up slow lubrication method: 1. Lower the window glass and spray panel wax into the rubber strips on both sides of the glass; 2. Roll the glass up and down again, and the sticking or unsmooth phenomenon will be reduced; 3. Lower the glass again and spray panel wax into both sides of the glass. During the use of the car, if you find that the car window is very difficult to roll up, it is likely caused by the aging of the rubber used on the car window. Rubber products will age after being used for a period of time. The car window regulator is generally composed of several parts: the operating mechanism (rocking arm or electric control system), the transmission mechanism (gear, gear plate or rack, gear and flexible shaft meshing mechanism), the glass lifting mechanism (lifting arm, moving bracket), the glass support mechanism (glass bracket), and the stop spring and balance spring.
5
3
Share

Why does the steering wheel tilt to the left?

The steering wheel tilting to the left is mainly due to: 1. It is related to the working performance of the shock absorber and the shock absorber spring. The deformation of the shock absorber and the reduction in the elasticity of the shock absorber spring can both cause changes in the vehicle height. 2. The deformation of the stabilizer bar and its small tie rod can also cause the phenomenon of one side of the vehicle being higher than the other. Extended content: The main solutions for steering wheel deflection are: 1. Turn the vehicle's steering wheel all the way to the right to expose the rear of the left front wheel. 2. First, loosen the fastening nut with a wrench, then rotate the left tie rod clockwise (clockwise rotation refers to the position of the tie rod relative to the tie rod base). 3. Then, repeat the previous steps by turning the steering wheel all the way to the left to expose the rear of the right front wheel. 4. Similarly, loosen the fastening nut and rotate the right tie rod counterclockwise.
9
4
Share

Is It Illegal to Modify an A7 into an RS7?

Modifying an A7 into an RS7 is illegal. Extensive modifications to the exterior, interior, powertrain, braking system, and other areas of the A7 without filing with the vehicle management office constitute illegal activities. The A7 is a mid-to-large-sized sedan under the Audi brand, equipped with a 2.0T turbocharged engine producing a maximum horsepower of 190 and a peak torque of 320 Nm, paired with a 7-speed dual-clutch transmission. The A7 measures 4976mm in length, 1908mm in width, and 1405mm in height, with a wheelbase of 2928mm. It features a 5-door, 4-seat hatchback body style. The vehicle utilizes multi-link independent suspension for both front and rear, and comes with features such as tire pressure monitoring, seatbelt reminder for all seats, brake assist, engine immobilizer, and central locking.
5
4
Share

What are the brands of car rims?

Rim brands include American VOSSEN rims, American ROHANA modified rims, American WCI rims, Japanese RAYS rims, etc. Overview: The rim (Car-Rim) is the central part of the wheel where the axle is installed, also known as the "wheel rim" or "steel rim." Rims are prone to accumulating dirt, and if not cleaned for a long time, they may corrode and deform, posing safety hazards. Classification: Rims can be divided into steel rims and alloy rims based on material, each with its own advantages and disadvantages. The main advantage of steel rims is their simple manufacturing process (usually using casting techniques, whereas aluminum alloy rims are typically produced using low-pressure casting), relatively low cost, and strong resistance to metal fatigue.
18
2
Share

Is a Tire Pressure of 3.5 Prone to Blowouts?

A tire pressure of 3.5 is prone to blowouts. The main reasons are: excessive tire pressure can easily cause wear on the tire crown, and encountering roads with many stones can lead to blowouts. Using a tire pressure of 3.5 during summer highway driving can cause a rapid increase in the internal tire temperature, making the actual tire pressure 0.1-0.2 bar higher than the recommended pressure, thereby increasing the risk of a blowout. Additional Information: 1. The normal tire pressure should be based on the manufacturer's recommended value. The standard tire pressure is related to the type of tire and the vehicle model. Different vehicle models have varying weights, heights, and tire sizes, and thus require different tire pressures. 2. The standard tire pressure for standard tires is 240kpa-250kpa, while for reinforced tires, it is 280kpa-290kpa.
13
2
Share

Why does the vehicle shake severely during cold start?

The main reasons for severe shaking during cold start of a vehicle are: 1. In low-temperature environments, the engine's internal temperature is insufficient. Therefore, more fuel injection is required during cold start to meet power demands. However, larger spark plug gaps result in smaller ignition energy. Poor fuel atomization at low temperatures requires higher ignition energy. Prolonged vehicle use can cause the spark plug gap to widen, leading to decreased ignition energy, which affects power performance and causes the vehicle to shake. 2. Ignition coil failure. The ignition coil is a transformer responsible for converting the vehicle's low-voltage current into high-voltage electricity, providing sufficient voltage for the spark plug to generate sparks. If the ignition coil fails, such as cracking or leaking electricity, it will result in insufficient or lack of spark plug ignition capability. Consequently, the air-fuel mixture in this cylinder will not combust properly, leading to engine misfire, difficult starting, and acceleration shaking.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.