Does the EA111 Engine Burn Oil?

What is the valve clearance for the Weichai WP10 engine?

Intake valve 0.3mm, exhaust valve 0.35mm. Since the valves are in contact with the cylinder block, which generates substantial heat during operation, this heat transfers to the valves, increasing their thermal expansion. Precautions for using Weichai natural gas engines: 1. Note 1: Before initial use, inspect the gas pipelines, supply devices, and electrical components for any gas leaks or unreliable electrical connections, and address any issues promptly. 2. Note 2: Ensure the battery voltage is sufficient, as the engine ignition and electronic control systems require adequate voltage. 3. Note 3: If the engine fails to start after three consecutive attempts, thoroughly recheck the gas and electrical systems. 4. Note 4: New vehicles must undergo a proper break-in period before regular use. 5. Note 5: Monitor gas levels and refuel promptly. When refueling, adhere to gas station regulations and let the station personnel handle the operation. Also, check the gas system's sealing during refueling. 6. Note 6: Drivers of gas-powered vehicles should enhance their knowledge and familiarize themselves with the principles of gas engines. 7. Note 7: For fuel, use only CNG that meets national standards for vehicles. 8. Note 8: Since the combustion products of CNG-only engines differ from diesel engines, use engine oil specifically designed for CNG engines.

2

4

Share

Does Replacing the Windshield Affect Sealing?

There is basically no significant impact. The front windshield of a car is generally adhered to the windshield frame with sealant, and with sufficient adhesive, there is little difference from the original. After replacement, the sealing of the car may slightly decrease, but due to the use of adhesive during the process, the issue is not significant. Impact of Improper Installation: Generally speaking, if the windshield is replaced correctly, there are no adverse effects. However, if installed improperly, the sealant on both sides of the windshield may not fit tightly against the glass, which can affect the car. For example, during high-speed driving, wind may enter through gaps between the windshield and the car body, leading to increased interior noise. Additionally, when driving on bumpy roads, you may hear a rattling or impact sound from the front of the car. Repairable Situations: If the car windshield is cracked, it doesn't always need to be replaced—some cracks can be repaired. However, repairs are only possible when the crack is on the outermost layer of the windshield. Generally, repairable crack types include star-shaped cracks and linear cracks.

6

3

Share

Where is the tire pressure reset button for Mitsubishi ASX?

The tire pressure reset button for Mitsubishi ASX is located in the trip computer. Tire Pressure Reset: Tire pressure reset refers to the operation of resetting the tire pressure monitoring system after addressing tire pressure faults. Tire Pressure Reset Method: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "beep" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the dashboard warning light will turn off, indicating the tire pressure reset is complete. What to Do When Tire Pressure is Low: If no damage is visible, simply inflate the tire to the normal pressure and reset the tire pressure system. If inspection reveals a puncture, promptly drive to a tire shop for repair, then reinflate. If the low tire pressure warning reappears after inflation without any punctures, it may be due to air leakage caused by a deformed wheel rim. In such cases, it is recommended to inspect and replace the wheel rim.

12

0

Share

What is the car logo with an L and a curve?

This is the logo of Luxgen, which offers a variety of SUV and MPV models. Here is some information about Luxgen: 1. Luxgen's SUV models include the URX, U6, U7, and U5. 2. The U6 is a compact SUV: it is equipped with three types of engines—a 1.6-liter turbocharged engine, a 1.8-liter turbocharged engine, and a 2.0-liter turbocharged engine. 3. The U6's powertrain configurations: 1. The 1.6-liter turbocharged engine: delivers 167 horsepower and 245 Nm of maximum torque, with a maximum power output at 6000 rpm and peak torque between 1400 and 4000 rpm. 2. The 1.8-liter turbocharged engine: produces 180 horsepower and 256 Nm of maximum torque, with a maximum power output at 5500 rpm and peak torque between 2400 and 4400 rpm. 3. The 2.0-liter turbocharged engine: generates 188 horsepower and 275 Nm of maximum torque, with a maximum power output between 5000 and 5500 rpm and peak torque between 2400 and 4000 rpm.

6

4

Share

Why is the front windshield unclear when driving at night?

When driving at night, the front windshield becomes unclear due to the temperature difference between the inside and outside of the car, with high humidity causing condensation of water vapor on the windshield into small droplets, leading to blurriness. You can wipe off the fog with a towel when parked, open the window for air circulation to remove the fog, or use a defogging agent. Precautions for nighttime driving are as follows: 1. Control your speed: Some road sections have insufficient lighting at night, so when driving through areas with low visibility such as turns, slopes, or narrow roads, be sure to control your speed. Also, slow down when moving from bright to dark areas, as your eyes need time to adjust. 2. Switch between high and low beams promptly: When two vehicles are 150 meters apart, switch from high beams to low beams. This is both a driving courtesy and a safety measure. If the other driver does not switch to low beams, immediately reduce your speed and continuously toggle between high and low beams to alert them. 3. Avoid overtaking when possible: Try to avoid overtaking at night. If you must overtake, continuously toggle between high and low beams to inform the vehicle ahead, and ensure there are no obstacles on the right side of the vehicle you are overtaking. Stay as far away as possible when encountering large trucks.

20

2

Share

Is it easy for car seats to dry after getting wet?

Car seats are not easy to dry after getting wet. Here are some methods to deal with wet car seat foam: 1. When the liquid has not completely soaked in, use items like paper towels or towels to quickly wipe away excess water, then avoid squeezing to prevent the liquid from seeping further. 2. If the liquid has not soaked in too much, you can consider using a hairdryer to heat and dry it, then place desiccants on the seat surface when the car is unoccupied. However, avoid using quicklime as a desiccant to prevent unnecessary trouble caused by heat generation when it reacts with water. 3. If it is summer, you can consider parking the car in the sun, then covering the seat with black canvas to absorb heat and raise the seat temperature, speeding up water evaporation. Also, open the car windows to let the moisture escape. 4. If too much liquid has soaked in and you cannot resolve it yourself, consider taking it to a repair shop to have the seat removed and repeat the above operations. Although you can remove the seat yourself, if you cannot reassemble it properly, it may lead to reduced seat stability and unnecessary trouble.

11

0

Share

Does the EA111 Engine Burn Oil?

What is the valve clearance for the Weichai WP10 engine?

Does Replacing the Windshield Affect Sealing?

Where is the tire pressure reset button for Mitsubishi ASX?

What is the car logo with an L and a curve?

Why is the front windshield unclear when driving at night?

Is it easy for car seats to dry after getting wet?

What Causes the Intermittent Malfunction of the Mitsubishi Accelerator Pedal?

What is the purpose of a hub centric ring?

When to Turn On and Off the Signal Light for a Right-Angle Turn?

How Much Sugar Will Destroy an Engine?