···
Log in / Register

Does the driving license automatically restore 12 points every year?

4 Answers
Clayton
07/30/25 12:06am

As long as you do not accumulate 12 penalty points within one demerit point cycle, your points will automatically reset to 12 at the start of the next cycle. Here are the relevant details: 1. Demerit Point Cycle: If the accumulated penalty points do not reach 12 within one cycle, the system will automatically reset the points (after fines are paid) at the beginning of the next cycle. 2. Accumulating 12 Points: If you accumulate 12 points, you must attend a study session and pass the subject one exam at the local vehicle management office where your license was issued or where the violation occurred. (If you accumulate 12 points twice consecutively within one cycle, you must also pass the subject three exam after upgrading your license.) Only after passing can your points be reset.

Was this review help?
8
2
Share
DiMadison
08/16/25 3:58am

I've been driving a rescue vehicle for over a decade, and this question gets asked eight hundred times a day. Your driver's license points aren't calculated based on the calendar year—they're counted over a 12-month period starting from the date you first got your license. Automatically reset at the end? Hold on! The catch is you must pay all fines related to the deducted points and resolve all violations before the reset. Any unresolved violations will carry over to the next cycle. The most accurate way to check is through the 'Traffic Management 12123' app—it shows your points cycle date. If you're hit with 11 points just before the cycle ends, you're walking on thin ice—one more red-light run and you're back to retaking the written test. My advice to all: avoid crossing lines and don't test traffic cameras—those 12 points disappear fast.

Was this review help?
17
3
Share
Expand All
BrooklynRose
10/19/25 5:53am

As a driving instructor for twenty years, I've seen students treat their license points like mobile data. Listen up: First, the scoring cycle for a driver's license ≠ the calendar year! It's calculated from the date of issuance as an anniversary. Second, clearing points has conditions—all fines must be paid, and violations must be resolved. Pay special attention during the probation period: for a C-class license, 12 points mean immediate cancellation and retesting; for AB-class licenses, 6 points extend the probation by one year. I recommend new drivers stick a note on the steering wheel: 'Points = Freedom,' and think of this every time they hit the gas. Yesterday, a student who just cleared his points got caught speeding 50% over the limit, and on the first day of the new cycle, he was back at driving school.

Was this review help?
15
3
Share
Expand All
StLilah
12/02/25 6:29am

Last year I learned this the hard way! I thought the points would automatically reset on New Year's Day, but when handling violations in March, I discovered a speeding ticket from last August was still counting against my points. The traffic police informed me: the points cycle is calculated based on the initial license issuance date. For example, if I got my license on May 20th, the points reset annually on that date. But there are two pitfalls: first, unpaid late fees will freeze your point reset; second, on-the-spot tickets incur late fees if not handled within 15 days. Last time I lent my car to a friend, his unpaid parking violation prevented my points from resetting. Now I've wised up—I check the 12123 app every month more diligently than checking my credit card statement.

Was this review help?
18
4
Share
Expand All
More Forum Discussions

What is the difference between high-speed motors and low-speed motors?

The differences between high-speed motors and low-speed motors are as follows: 1. Different design perspectives: From a design perspective, high-speed motors have a small rotor diameter and a large length; low-speed motors have a large rotor diameter and a small length. A smaller diameter means a relatively smaller linear speed of the rotor's outer diameter, and the centrifugal force on the embedded windings during high-speed rotation is relatively small, making them suitable for high-speed operation. Here, high-speed specifically refers to tens of thousands of revolutions, while general motors operate at a few thousand revolutions, which does not reflect this design concept. 2. Different motor power: Due to the high speed, high-speed motors have a high power density, and their volume is much smaller than that of low-speed motors, effectively saving materials. 3. Different efficiency: High-speed motors are directly connected to the prime mover, eliminating the traditional speed reduction mechanism, resulting in high transmission efficiency and low noise; low-speed motors produce more noise.
9
0
Share

What Causes a Car to Stall?

Reasons for car stalling: 1. Electrical circuit failure - This may occur due to low-voltage power interruption during driving, causing the engine to stall. In this case, you should primarily check the ignition and starter switches as well as the fuse box; 2. Short circuit in low-voltage wiring causing stalling - This situation requires inspection of the low-voltage circuits; 3. Component failure - This issue is usually related to faults in the ignition coil, capacitor, or electronic ignition module; 4. Fuel system failure - Damage to the fuel pump, fuel line rupture, clogged carburetor fuel inlet, or empty fuel tank can cause stalling, though the car may still be restarted with difficulty in such cases; 5. Ignition system failure - Problems with the engine overheating or the anti-knock system can also lead to stalling.
2
4
Share

How to Customize a License Plate Number?

License plate number customization method: 1. Enter the vehicle type, ID number, and the vehicle's VIN, then select the region; 2. Customize the license plate number in the system, which usually offers numbers and letters to choose from. After selecting a satisfactory license plate number, press confirm and proceed with other formalities. The self-service license plate customization system is installed on self-service touchscreens in the DMV service hall. The search, query, and license plate confirmation are all completed independently by the vehicle owner. Therefore, vehicle owners should follow the instructions when selecting their license plate numbers. Once the customized license plate number is confirmed by the owner, it is automatically uploaded to the DMV's vehicle registration system and cannot be changed. Vehicle owners should avoid input errors.
18
2
Share

How to reset the maintenance light on the Roewe RX3?

Method to reset the maintenance light on the Roewe RX3: 1. Turn off the ignition switch while holding down both arrow buttons simultaneously; 2. Turn on the ignition switch, and after about 3 seconds, release the two arrow buttons; 3. The reset menu will appear, asking if you want to reset—hold the SET button for more than 3 seconds; 4. Press the MODE button, then turn off the ignition switch to complete the reset. In terms of appearance, the Roewe RX3 features the brand's signature shield-shaped front grille, integrated with the headlights on both sides. The side profile boasts smooth and clean lines, with a sleek design that gives it a robust look. The dimensions of the Roewe RX3 are 4408 mm in length, 1804 mm in width, 1651 mm in height, with a wheelbase of 2625 mm.
14
2
Share

Are there cameras at highway exit ramps?

There are cameras at highway exit ramps. Here are specific details about highway ramps: 1. Introduction: Ramps are part of the highway, and reversing on highway sections is not allowed. Typically, surveillance cameras are installed at ramp entrances. If a vehicle reverses on a ramp, it will definitely be captured and subject to corresponding penalties. 2. Reversing: Stopping, making U-turns, backing up, or reversing on highways are extremely dangerous traffic behaviors. Due to the high speed, drivers have very short reaction times, making it easy to cause traffic accidents with unimaginable consequences. Highway accidents are often catastrophic, harming both oneself and others. Therefore, reversing is prohibited on highways. If discovered, the driver will have 12 points deducted from their license and may face suspension of their driving permit. 3. Precautions: When exiting the highway, drivers should pay attention to exit warning signs, change lanes in advance, and follow the instructions to enter the lane connected to the exit for deceleration. If an exit is missed, drivers must continue forward until the next exit to leave the highway. They must not reverse, drive in the opposite direction, overtake, or stop.
2
4
Share

What is the ground clearance of the Ford Mustang?

The ground clearance of the Ford Mustang is 120 millimeters. In terms of exterior design, although the side profile of the Ford Mustang still emphasizes stability, a trapezoidal indentation line runs from the front fender straight to the rear fender, showcasing the vehicle's dynamic character. The rear end also maintains a stable appearance, with vertical tail lights featuring a distinctive rectangular design. For the interior, the Ford Mustang offers optional interior color accent packages, including charcoal black leather seats with red stitching, red door panels, and red floor mats. In terms of features, the Ford Mustang comes equipped with one-touch power windows, power-adjustable mirrors, a keyless entry system, power locks, a heated rear window, and intermittent windshield wipers.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.