Does the deployment of car airbags count as a major accident?

1 Answers
KimberlyLynn
07/29/25 10:30am
Deploying car airbags counts as a major accident. Reasons why airbag deployment is considered a major accident: Car airbags are a safety protection device designed to minimize passenger injuries when the vehicle experiences severe impacts. Therefore, airbags only deploy in emergency situations, specifically when the vehicle undergoes intense collisions to protect passengers. Compared to other malfunctions, airbag deployment is classified as a major accident. Methods to avoid accidents while driving: Do not rush through intersections, especially when making right turns. In many cities, right turns do not have traffic signals, and drivers often proceed directly. However, adjacent non-motorized lanes may have cyclists or electric scooter riders who may not strictly follow traffic rules or assume drivers would not dare to hit them. Therefore, when approaching a right-turn intersection, always stop to let pedestrians pass first or carefully observe the situation in the right-side non-motorized lane. Never rush for that one minute.
Was this review help?
1
2
Share
More Forum Discussions

Is the first maintenance free?

Generally speaking, the first car maintenance is free. When purchasing a car, there will be a car warranty manual. Bring the warranty manual and go to the brand's 4S store to perform the first maintenance. The first maintenance of the vehicle is very important and needs to be done on time by the owner. During the first maintenance, the vehicle can be inspected to confirm the usage condition of the car. Precautions for the first car maintenance: Perform maintenance according to the specified time. Each car comes with a maintenance manual when it leaves the factory, which will indicate the maintenance interval. Car owners can perform the first maintenance based on the information in the car maintenance manual. When purchasing a car, sales personnel usually remind consumers to perform the first maintenance at a certain time or after reaching a certain mileage. Items that need to be done during the first maintenance. The first car maintenance will include free replacement of engine oil and oil filter, as well as a comprehensive inspection of the car, which generally takes about half an hour. The first maintenance can be done at a 4S store or at a location closer to the owner, but only cars that have their first maintenance at a 4S store can enjoy the car quality guarantee. Pre-check the problems that exist before the first maintenance. During the break-in period of the car, the owner can evaluate the usage condition of the car. If there are any doubts, they can be promptly reported to the technicians during the first maintenance.
7
4
Share

Can the Imperial 400's seat height be lowered?

In fact, it cannot be lowered because, in a sense, it only adjusts the softness and hardness of the seat. Such a subtle change will not have a significant impact on the overall seat height. Appearance of the Imperial 400: In terms of appearance, the Imperial 400 largely inherits the design essence of the first Imperiale from 1956. At that time, the iconic single-cylinder transverse egg-shaped engine of the Imperiale 125 was one of its distinguishing features, and its low center of gravity was well-reflected. The Imperial 400 also strives to replicate this design on its double-cradle frame as much as possible. Powertrain configuration of the Imperial 400: The Imperial 400 is equipped with a 374cc single-cylinder air-cooled 2V engine, delivering a maximum power of 15.5 kW (21 Ps) at 5500 rpm and a maximum torque of 29 Nm at 4500 rpm. Based on the data, the engine is relatively focused on performance at low RPMs.
11
0
Share

What is the maximum speed of the Jog i during the break-in period?

The Jog i can reach a speed of 80 km/h during its 800 km break-in period. Generally, it is not recommended to exceed 100 km/h. Definition of the break-in period: The break-in period for a new motorcycle refers to the process where mechanical components initially come into contact, rub against each other, and mesh together during operation. After the break-in period: Upon completion of the break-in period, the new motorcycle should be taken to an authorized service station for a full break-in maintenance. This mainly includes changing the engine oil, replacing the oil filter, cleaning, measuring cylinder pressure, removing carbon deposits from the combustion chamber, removing the speed limiter, adjusting the engine idle speed, inspecting the braking system, adjusting the clutch pedal free travel, and tightening the front suspension and steering mechanism.
8
5
Share

Is the rear light the same as the low beam?

No. The low beam is a type of headlight. Headlights refer to the vehicle's high beam, low beam, and turn signals. Introduction to headlights: Headlights are lighting devices installed on both sides of the front of a car, used for illuminating the road during nighttime driving. They can be categorized into two-lamp and four-lamp systems. Definition of headlights: Regarding the definition of headlights, they refer to lighting devices installed on both sides of the front of a car, used for illuminating the road during nighttime driving. From this statement, it can be understood that the low beam falls within the category of headlights, but headlights are definitely not limited to just the low beam. By definition, both low beams and high beams are considered headlights.
5
0
Share

How Long Is the Date of New Car Glass and Tires Considered Normal?

New car tires are more suitable if their manufacturing date is within half a year. The date of new car glass should not exceed six months to be considered normal. Introduction to Tires: Tires are circular elastic rubber products assembled on various vehicles or machinery for ground rolling. They are usually mounted on metal rims, supporting the vehicle body, cushioning external impacts, achieving contact with the road surface, and ensuring the vehicle's driving performance. Functions of Tires: Tires are often used under complex and demanding conditions, enduring various deformations, loads, forces, and high and low temperatures during operation. Therefore, they must have high load-bearing performance, traction performance, and cushioning performance. At the same time, they are required to have high wear resistance and flex resistance, as well as low rolling resistance and heat generation. Half of the world's rubber consumption is used for tire production, highlighting the significant demand for rubber in tire manufacturing.
7
1
Share

Is Indian the Same as Harley?

Indian is not Harley. Harley motorcycles are more expensive than Indian. Indian uses joint-venture brand engines, such as the general-purpose SEG series engines, which are relatively reliable in terms of quality and stability. Resale value comparison: Harley typically involves foreign automakers providing technology while domestic manufacturers supply labor. Therefore, compared to Indian, Harley has more technical assurance. Additionally, the size of brand influence directly affects a vehicle's resale value. In contrast, Indian's resale rate is much lower. Introduction to Indian: Looking back through the long river of history, there have been many ups and downs. Past glory is not necessarily a permanent classic, but past classics are certainly permanent glories. Indian motorcycles are like a seed buried in the field of motorcycles, bathed in the spring breeze, instantly radiating an incomparably dazzling light.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.