Does the Dash Cam Record While Parked?

1 Answers
Gonzalez
07/30/25 1:37am
Dash cams do not record while parked. The following provides an introduction to the functions of dash cams and considerations for purchasing one: Functions of Dash Cams: A dash cam is a device that records images, sounds, and other related information during vehicle travel. Once installed, it can record the entire driving process in video and audio, providing evidence in the event of a traffic accident. Considerations for Purchasing a Dash Cam: A dash cam should have good video clarity and nighttime recording capabilities. High definition is determined by the main control chip of the dash cam, so buyers should pay attention to the type of image processing solution used in the main control chip. Additionally, the dash cam should have sufficient storage space to enable long-term effective recording.
Was this review help?
13
2
Share
More Forum Discussions

How long after crystal coating can the car be exposed to rain?

Crystal coating requires 24 hours before the car can be exposed to rain. Avoid wiping the paint surface for three days and refrain from washing the car for one week. The crystal coating process includes: 1. Covering the windshield, license plate, and gaps; 2. Using polish and ultra-fine swirl remover to eliminate fine scratches on the paint; 3. Degreasing the car's paint surface; 4. Polishing the paint with a professional crystal coating cloth. Benefits of crystal coating: 1. It isolates the car's surface from external elements, preventing oxidation and protecting against acid rain corrosion, thereby extending the paint's lifespan; 2. Makes it easier to clean dust, dirt, and other debris from the car's surface; 3. Reduces damage from external forces; 4. Enhances resale value.
15
3
Share

How often should the timing belt on the Ford Kuga be replaced?

The replacement interval for the timing belt on the Ford Kuga is 60,000 kilometers. However, the replacement cycle should also be determined based on the vehicle's usage conditions. If the car is used more intensively, it is recommended to regularly inspect the condition of the timing belt and replace it promptly if any damage is observed. Signs indicating the need for timing belt replacement include: Unstable idling, frequent stalling, poor acceleration, and lack of power during driving. In severe cases, the engine may shake. When these symptoms occur, and after ruling out faults in components like the throttle body, the timing belt should be considered as the potential issue. If the timing belt completely breaks, it can cause the valves to open and close at the wrong times and disrupt the piston's up-and-down movement. This misalignment can lead to collisions between the valves and pistons, resulting in damage to both components and rendering the engine inoperable. In severe cases, a major engine overhaul may be required. Manufacturer-recommended replacement intervals include some margin, so during routine maintenance, do not overlook the inspection of the timing belt. Based on actual conditions, assess whether the timing belt can continue to be used. If cracks or wear are present, consider replacing the timing belt.
19
1
Share

How to Remove the Fuel Pump Pipe of Audi A6?

The method to remove the fuel pump pipe of Audi A6 is: 1. Release the fuel pressure; 2. There are clips on both sides of the fuel pump pipe. Use needle-nose pliers to squeeze the two clips, push them inward firmly first, and then pull outward forcefully to remove the pipe. Taking the 2020 Audi A6 as an example, it belongs to the mid-to-large-sized car category, with body dimensions of: length 5038mm, width 1886mm, height 1475mm, and a wheelbase of 3024mm. The 2020 Audi A6 is equipped with five-link independent suspension both in the front and rear. It is powered by a 2.0T turbocharged engine, with a maximum horsepower of 190PS, maximum power of 140kW, maximum torque of 320Nm, and is paired with a 7-speed dual-clutch transmission.
10
4
Share

Where is the fuel tank switch of Audi A6?

The fuel tank switch of Audi A6 is located at the lower part of the driver's door, on the left side of the driver's leg space. The fuel tank cover switch and the front engine compartment switch are together. Simply press this electronic switch to open the fuel tank. Function of the fuel tank: It stores the working fluid required by the hydraulic system and also serves to dissipate heat, precipitate impurities, and separate air bubbles from the liquid. Taking the 2020 Audi A6 as an example, it belongs to the mid-to-large-sized car category, with body dimensions of length 5038mm, width 1886mm, height 1475mm, a wheelbase of 3024mm, a fuel tank capacity of 73 liters, and a curb weight of 1800kg.
1
3
Share

Which Engine Oil is Suitable for the Encore?

The original factory engine oil brand for the Encore is Silver Mobil. For later maintenance and oil changes, you can choose brands such as Mobil or Castrol. The recommended oil specification in the official Encore manual is 5W-30. Any oil model that meets this specification parameter can be used. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand low temperatures of -30°C. The smaller this number, the better the low-temperature fluidity, making cold starts smoother. The latter number represents the kinematic viscosity of the oil at 100°C. The higher the value, the better it maintains viscosity under high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in the Encore is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug and place an oil pan to catch the old oil until it stops flowing. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain out; Use a special wrench to remove the oil filter; Apply oil to the seal of the new oil filter and tighten it clockwise by hand; Add new engine oil through the oil filler cap on the engine valve cover. Generally, fill up to three-quarters of the oil container; Start the engine and let it run for 5 minutes, then check for any leaks around the oil drain plug and oil filter. If there are leaks, perform necessary repairs; After stopping the engine, pull out the oil dipstick to check if the engine oil level is within the standard range.
17
4
Share

What kind of car should I choose for the Sichuan-Tibet line?

Choose an off-road vehicle for the Sichuan-Tibet line. Below are relevant introductions about off-road vehicles: 1. Principle: The principle of the differential is that if one wheel loses sufficient friction, it will spin at twice the speed. Usually, all-wheel drive can solve the problem. To further improve performance, a differential lock is needed to lock the differential effect. This is not very useful and not complicated either. Tractors designed for southern paddy fields all have this device. Having this in a car is basically a meaningless "full configuration," just like a cigarette lighter, which is rarely used. 2. Precautions: The car is a rugged type, but when driving an off-road vehicle, you must not be careless or arrogant. When in off-road mode, maintain a calm mind, observe all directions, and decide on the appropriate gear before driving. When entering dangerous areas, remember one word: "slow."
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.