Does the CRH380BL model have charging ports?

1 Answers
McJude
07/30/25 5:25am
crh380bl model has charging ports, usually located under the seats. Below is the relevant introduction: Harmony: The Harmony CRH380BL electric multiple unit (or CRH3-380BL) is a high-speed electric multiple unit developed by the Ministry of Railways of the People's Republic of China for operation on newly built high-speed intercity railways and passenger dedicated lines. The Ministry of Railways of China named all China Railway High-speed (CRH) vehicles that independently developed key technologies, introduced foreign technologies, and were jointly designed and produced as "Harmony". Operation: Starting from January 13, 2011, the first batch of 9 CRH380BL electric multiple units assigned to the Shanghai Railway Bureau were put into commercial operation on the Shanghai-Hangzhou Passenger Dedicated Line before the Spring Festival travel season.
Was this review help?
2
3
Share
More Forum Discussions

What Causes the Failure of Automatic Window Roll-up and Roll-down?

The failure of automatic window roll-up and roll-down can be attributed to several reasons: First, the aging and deformation of the glass sealing strip, which requires replacement of a new sealing strip or application of talcum powder for lubrication if not severe; second, the window lift guide rail being too dirty or obstructed by foreign objects, necessitating cleaning and application of grease; third, motor failure or low battery charge, requiring charging or motor replacement. Aging and Deformation of Glass Sealing Strip: Aging, excessive dirt, or deformation of the glass sealing strip can create resistance to the window's upward or downward movement. It is best to replace the sealing strip, or simply clean it if it's just dirty. Spraying some dashboard wax or applying talcum powder to the glass sealing strip can usually yield good results. Dirty Window Lift Guide Rail: This is also a lubrication issue. Cleaning the window lift guide rail and applying grease can eliminate the malfunction. Low Battery Charge or Motor Failure: When rolling up or down the window without the engine running, the power is drawn from the battery. If the battery charge is too low, difficulties in window movement may occur. If there is difficulty in rolling the window when the battery is sufficiently charged and there is no resistance, it is highly likely due to motor failure.
3
2
Share

Should You Pull the Clutch When Turning a Motorcycle?

Motorcycle turning do not pull the clutch, pulling the clutch is usually accompanied by braking. In a curve, this can easily cause the tire to lock up and the bike to fall. Reasons for not pulling the clutch when leaning a motorcycle: When turning a motorcycle, you should first slow down, shift your center of gravity, and then turn the handlebars. Generally, you do not pull the clutch when turning, only reduce the throttle, and lightly pull or step on the brake to slow down. With the clutch engaged, you can use the throttle and brake to control the speed. When the clutch is disengaged, the bike is in an inertial state and cannot use the throttle to adjust speed, making it difficult to control. Therefore, it is generally not advisable to pull the clutch when turning. When you can pull the clutch on a motorcycle: If the curve is very sharp or the speed is not suitable for being too fast, you need to downshift or even stop, then you should pull the clutch. Shifting gears or stopping also requires pulling the clutch.
15
2
Share

What is the standard for interior noise at 120 km/h?

If the car speed reaches 120 km/h, the interior noise should be below 69 decibels to meet the standard. Normal car interior noise standards: Generally, the noise inside a sedan should be below 60 decibels to be considered normal. 40-60 decibels is the range for normal conversation. According to GB-1495-2002, the exterior noise limit for small cars (M1 category vehicles) is 74 dB(A) (decibels). Currently, there is no mandatory standard for car interior noise. Introduction to car interior noise: When a car is running, it generates noise, causing noise pollution both inside and outside the vehicle. Generally, interior noise mainly comes from engine noise, road noise, tire noise, wind noise, resonance noise, and other sources.
6
2
Share

Introduction to the Functions of Suzuki UY125 Dashboard Buttons

Suzuki UY125 has two dashboard buttons for the parking auto-lock function and auto start-stop function. Introduction to the Exterior of Suzuki UY125: The UY125 is a sturdy and durable model. Its length and wheelbase are slightly larger than those of scooters in the same class, giving it a spacious riding area with ample legroom and a well-balanced seating arrangement for both the rider and passenger. Introduction to the Handling of Suzuki UY125: The UY125's power delivery is strongest in the mid-to-high RPM range, where acceleration increases linearly, providing a very smooth acceleration curve. The throttle response is light and seamless, and the suspension offers pleasant surprises. In urban commuting scenarios, the preload and rebound tuning of the front and rear suspension are well-balanced, making its comfort level outstanding among scooters in the same class. In terms of handling, the UY125's frame tuning, suspension, braking, and throttle achieve a very harmonious match, delivering comprehensive performance.
2
4
Share

What is the small square in front of the car?

The small square below the car's headlights is the headlight cleaning device, used to clean dust from the surface of the headlights. There are two structural modes for the headlight cleaning device. Scrubbing system: Used for glass diffusers, because although plastic diffusers have wear-resistant coatings, they are still relatively sensitive to mechanical cleaning. This type of cleaning system can still be seen in older generation models. High-pressure cleaning system: Used on both glass and plastic diffusers. The cleaning effect mainly depends on the distance between the nozzle and the diffuser, the size of the water droplets, the contact angle, the speed of the water spray, and the amount of water sprayed.
19
1
Share

How wide is a lane in meters?

A two-way four-lane road is 2x7.5 meters, a two-way six-lane road is 2x11.25 meters, and a two-way eight-lane road is 2x15 meters. Meaning of lane width: Lane width (also known as standard lane width) refers to the width required for a single line of vehicles to travel safely and comfortably on the road, including the external width of the design vehicle and the necessary clearance for passing, overtaking, or parallel driving. Detailed explanation of lane width standards: The national standard specifies the width of each motor vehicle lane on highways. For multi-lane roads above the third grade, the width of each motor vehicle lane is 3.5-3.75 meters. There is no uniform standard for the central median strip, which is determined based on local conditions. A simple cement central median strip is one meter wide.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.