Does the Corolla's automatic braking have a speed limit?

2 Answers
OBella
08/31/25 5:45am
The Corolla's automatic braking has a speed limit, effective between 10 to 180 km/h. Introduction to Automatic Braking: This refers to a technology where the vehicle, while driving normally without adaptive cruise control, can autonomously generate braking force to decelerate the car when encountering sudden hazards, thereby enhancing driving safety. Vehicle Specifications: Length 4635mm, width 1780mm, height 1455mm, with a wheelbase of 2700mm. The 2021 Corolla is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 121PS, maximum power of 89kW, and maximum torque of 148Nm, paired with a 6-speed manual transmission.
Was this review help?
11
5
Share
Tanner
09/13/25 2:14am
I'm particularly fond of studying automotive technology. The Corolla's automatic braking system does indeed have speed limitations, which are based on its Toyota Safety Sense module. The system typically activates within a speed range of 10 to 180 kilometers per hour. In city traffic jams, it works well at low speeds, promptly stopping to prevent rear-end collisions. However, once you exceed 180 km/h on the highway, its response becomes delayed or even fails, as it's designed for everyday traffic scenarios. At high speeds, the increased braking distance raises risks, so it's advisable for owners not to rely on it entirely. Always check the system settings before each trip to ensure proper calibration. Newer models like the 2023 version might have minor adjustments, but they inherently have limitations. During maintenance, have technicians inspect the sensors to ensure reliability.
Was this review help?
11
5
Share
Expand All
More Forum Discussions

Should Automatic Transmission Cars Shift to Neutral at Traffic Lights?

Automatic transmission cars should shift to neutral when waiting at traffic lights, and using the handbrake will provide additional safety. More detailed information is as follows: 1. Waiting at traffic lights in D gear with the foot brake engaged causes the passive wheel in the torque converter between the engine and transmission to remain fixed, generating a reaction force on the driving wheel, which increases the engine load. This can be understood as hindering engine operation. As a result, the engine ECU increases fuel injection, leading to higher fuel consumption, which is why you can see a high instantaneous fuel consumption when braking to a stop. 2. It is not recommended to wait at traffic lights in P gear because shifting from P to D gear can sometimes cause the car to reverse, affecting the vehicle behind and potentially leading to a rear-end collision, for which you may also bear some responsibility. 3. Some vehicles now come with an "autohold" function, which is an automatic handbrake. After pressing the button to activate this function, the car will automatically brake once it comes to a stop, eliminating the need to shift between reverse and drive gears, and the vehicle will remain in a parked state. However, not shifting to neutral still poses certain safety risks, such as the car accelerating rapidly if the accelerator is mistakenly pressed, which could lead to a collision. Additionally, the auto start-stop function is also suitable for use at traffic lights, as it helps save fuel to some extent, and the engine, when turned off, does not emit exhaust fumes into the car.
20
1
Share

What are the effects of changing from 50 to 55 tires?

Switching to tires with a 55% aspect ratio provides more comfort because tires with higher smoothness have longer sidewalls and stronger cushioning capacity, making them relatively more comfortable. However, the road feel may be poorer, and the lateral resistance during turns is weaker. Conversely, tires with a low aspect ratio and large inner diameter have shorter sidewalls and wider treads, resulting in a larger contact area and greater pressure-bearing capacity. These tires are more responsive to road conditions, offering stronger lateral resistance during turns and enhanced vehicle handling. Regardless of the type of tires you switch to, the following points should be noted during daily use: Regularly inspect the tire surface for cracks, deformations, or other defects. Due to wear from driving, the tread grooves gradually become shallower. If the tread is worn flat, it loses its drainage and anti-slip functions, significantly reducing the vehicle's performance. Small cracks may also pose a risk of tire blowouts at high speeds. Additionally, promptly remove pebbles lodged in the grooves. Try to park on level ground. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that may deteriorate rubber. After parking, avoid turning the steering wheel, as this accelerates tire wear. Do not splash water to cool the tires. In hot weather or during high-speed driving, tires are prone to overheating, and the air pressure may increase. In such cases, stop to allow the tires to cool naturally. Never release air to reduce pressure or splash water to cool the tires, as this may cause abnormal aging of the tread rubber. Avoid sudden braking. Minimize frequent or hard braking to prevent accelerated tread wear caused by dragging between the tires and the road.
14
2
Share

How to Release a Locked Rear Wheel on a Car?

Start the vehicle, then adjust the gear to put the car in a braking state. After that, move the vehicle forward and backward repeatedly about three times. Pour boiling water at 100°C onto the brake pads, then repeat the forward and backward movements again.
6
5
Share

How to charge the Benben EV?

Introduction to charging methods for the Benben EV: There are several charging methods available: wall-mounted charging stations, public charging stations, and portable chargers included with the vehicle. It is also possible to charge using a standard 220V household power supply, which may take around 11 hours for a full charge. Professional charging stations, on the other hand, can typically charge the vehicle in about half an hour. There are three main charging methods for new energy vehicles: public charging stations, home charging stations, and portable charging. Below are detailed introductions to each method: 1. Public charging stations: Public charging stations generally offer fast charging (DC) and slow charging (AC). As the names suggest, fast charging provides more power in a shorter time, while slow charging delivers less power and takes longer. Public charging stations are more common in first-tier cities, whereas they are relatively scarce in third- and fourth-tier cities, making charging less convenient. The availability of public charging stations may vary by city, so it is advisable to check the local situation. 2. Home charging stations: To use this method, a charging station must be installed at home. Installation requires coordination with the property management to ensure compliance with community regulations. After obtaining approval from the property management, further permissions from the fire department and civil defense office are necessary, followed by an on-site inspection by the power supply department. 3. Portable charging: Portable charging involves using the portable charging cable provided with the vehicle to connect to a standard household power outlet. The advantage of this method is convenience, as charging can be done wherever there is an outlet. However, the downside is the very slow charging speed. For example, charging a vehicle with a 57kWh battery and a 300km range can take nearly 20 hours for a full charge.
18
5
Share

How Much Engine Oil Should Be Added to a Car?

Car engine oil should be added between the marks on the dipstick, preferably just below the upper limit. Here are some related points: 1. Do not overfill: Overfilling engine oil may lead to leakage risks due to vehicle movement and jolts. 2. Proper selection: When choosing engine oil, consider factors such as the car model, season, climate, engine displacement, and technical performance. Selecting the right engine oil provides a better working environment for the car and helps prevent malfunctions related to oil issues.
7
0
Share

How to Determine the Distance from the Following Vehicle Using the Rearview Mirror?

First, adjust the rearview mirror properly, with the standard being able to see the door handle, and the height of the door handle should be at the middle height of the rearview mirror. Remember the principle: closer objects appear larger, while distant objects appear smaller. In summary, the larger the following vehicle appears in the rearview mirror, the closer it is to your vehicle.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.