Does the Corolla not have an anti-collision beam?

1 Answers
AlexandraMarie
07/29/25 4:37pm
The Corolla is equipped with anti-collision beams both at the front and rear. More information about anti-collision beams is as follows: 1. An anti-collision beam is a device designed to absorb collision energy and reduce impact during a crash. It consists of a main beam, an energy absorption box, and mounting plates that connect to the vehicle. Both the main beam and the energy absorption box can effectively absorb collision energy during low-speed impacts, minimizing damage to the vehicle's longitudinal beams and providing protection. 2. In high-speed offset collisions, the anti-collision beam effectively transfers the impact force from the left (or right) side of the vehicle to the right (or left) side, allowing the entire body to absorb the collision energy. During low-speed collisions (typically below 15 km/h), the anti-collision beam helps prevent damage to the front and rear longitudinal beams, reducing repair costs.
Was this review help?
14
4
Share
More Forum Discussions

What does 'lo' mean on a car?

lo stands for low. This symbol is found on the temperature control knob of the car's air conditioning control panel, where the 'lo' direction indicates lowering the air conditioning temperature. More information about car air conditioning is as follows: 1. The car's air conditioning can both cool and heat. When cooling, the compressor clutch engages, and the engine drives the compressor to operate. During operation, the compressor continuously compresses the refrigerant and sends it to the evaporator. 2. The refrigerant expands inside the evaporator, absorbing heat and cooling the evaporator. The cooled evaporator then cools the air blown by the blower, allowing the car's air conditioning vents to blow cold air.
4
2
Share

How to judge the distance between the car and the front, rear, left, and right sides?

Methods to determine the distance between the car and the front, rear, left, and right sides: 1. Wheel position: Judge based on the position of the left wheel, provided that you know where the left wheel will pass over, to avoid the tire pressing on solid lines or dodging potholes and stones on the road. 2. Rearview mirror judgment: Observe the distance between the vehicle and the lane dividers through the side mirrors to adjust the vehicle's position. You can also check the left and right distances using reference points on the dashboard or the hood. When the speed exceeds 100 kilometers per hour, the safe distance should be more than 100 meters.
19
5
Share

What Causes a Sudden Increase in Fuel Consumption for Nissan Sylphy?

Reasons for a sudden increase in fuel consumption in Nissan Sylphy: 1. Tire Pressure: Insufficient tire pressure or tire wear can cause increased friction between the tires and the ground, leading to higher resistance and increased fuel consumption. 2. Tires: Severely worn tires may frequently slip, also resulting in higher fuel consumption. 3. Fuel Quality: Pay attention to fuel quality and regularly clean carbon deposits. Poor-quality gasoline can lead to excessive carbon buildup, which roughens the intake pipe walls, affecting air intake efficiency and mixture quality, causing a sharp rise in fuel consumption. 4. Oxygen Sensor: Regularly inspect the oxygen sensor. If damaged, the electronic fuel injection system's computer cannot receive information about oxygen concentration in the exhaust pipe, often resulting in a higher mixture concentration in the engine and increased fuel consumption.
14
5
Share

How to Adjust One-Touch Power Window Function?

Here are the steps to adjust the one-touch power window function: 1. Press and hold the window button to raise the window. 2. Continue holding after the window is fully closed until you hear a "click" sound from the window. 3. Release the button - the one-touch function is now activated. The operation methods for one-touch windows are as follows: 1. Short press: window automatically lowers completely; Short pull: window automatically rises completely; 2. Press and hold: release to stop window descent; 3. Pull and hold: release to stop window ascent; 4. Press and hold the remote unlock button to lower all four windows automatically.
7
2
Share

Is the BMW X3 a three-cylinder or four-cylinder?

BMW X3's engine is a four-cylinder, not a three-cylinder. The relevant introduction of the four-cylinder engine is as follows: Introduction to four-cylinder engines: The four-cylinder engine, also known as a four-cylinder engine, is a machine capable of converting one form of energy into another more useful form of energy. Composition of four-cylinder engines: The main components of a four-cylinder engine include the cylinder block, crankcase, cylinder head, and cylinder gasket. Working principle of four-cylinder engines: The basic principle of a four-cylinder engine is to convert the thermal energy of gasoline (diesel) into mechanical energy by pushing the piston to do work through the combustion and expansion of gas in a sealed cylinder.
8
4
Share

What to Do When the Light Failure Indicator Lights Up?

Solutions for when the light failure indicator lights up: 1. Inspect all the bulbs in the car to identify the faulty one. 2. Replace the damaged bulb. Precautions for using car lights: 1. Turn on the low beam when driving at night. 2. Do not use the high beam when a following vehicle is driving closely behind the vehicle in front in the same direction. 3. When passing sharp curves, slopes, arched bridges, crosswalks, or intersections without traffic signal control at night, alternate between high and low beams to signal. The functions of car lights are as follows: 1. Accurately illuminate the road ahead to enhance safety during nighttime driving. 2. Convey signals to avoid traffic accidents.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.