Does the Corolla have rear air conditioning vents?

1 Answers
Levi
07/30/25 12:24am
The Corolla does not have rear air conditioning vents. The functions of the air conditioning system are: 1. To regulate and control the temperature, humidity, air cleanliness, and airflow inside the cabin to an optimal state; 2. To provide a comfortable riding environment for passengers, reducing travel fatigue; 3. To create favorable working conditions for the driver, ensuring driving safety. The Corolla's body dimensions are: length 4635mm, width 1780mm, height 1455mm, with a wheelbase of 2700mm and a fuel tank capacity of 50 liters. It is equipped with a 1.8L naturally aspirated engine, delivering a maximum power of 73kW and a maximum torque of 142Nm, paired with an ECVT continuously variable transmission.
Was this review help?
1
3
Share
More Forum Discussions

What does it mean when the vehicle jerks during startup?

Jerking during startup refers to the intermittent sudden surge phenomenon when the vehicle begins to move. If this occurs during a driving test, 10 points will be deducted according to regulations. Test vehicles usually have higher idle speeds; generally, after engaging the gear and releasing the handbrake, slowly lifting the clutch will make the car move. Only after the car starts moving should you press the accelerator and shift gears. Reasons for jerking during the test: 1. Subject Two (Parking Skills): If the clutch is released too quickly and the brake is pressed abruptly, jerking is likely to occur. The car will suddenly surge forward a short distance. 2. Subject Three (Road Driving): If the clutch is released too quickly, the accelerator is pressed too hard and suddenly, and the gear is not in neutral, jerking is prone to happen.
8
2
Share

Can You Transfer from One Driving School to Another?

It is possible to transfer to another driving school. During the process of taking the motor vehicle driver's license examination, you can change the examination location once. After changing the examination location, you need to complete all the examination items for the motor vehicle driver's license at this location until you obtain the driver's license. Below is additional information: 1. Is it convenient to apply for a driver's license: Applying for a driver's license is very convenient. For small vehicle-type motor vehicle driver's licenses, you are allowed to register in a different location. When registering, you only need to bring your ID card. For large vehicle driver's licenses, you still need to register at a driving school in your registered residence. This has already provided great convenience for obtaining a motor vehicle driver's license, which is very good. 2. What do you need to bring when registering for a motor vehicle driver's license: When registering for a motor vehicle driver's license, you only need to bring your ID card. If your ID card is lost, you can bring a temporary ID card. The temporary ID card must be issued by the public security authority to be valid. After completing the registration, wait for the physical examination. After passing the physical examination, you can start practicing for the first subject of the motor vehicle driver's license examination.
6
3
Share

Is a CVT Transmission Manual or Automatic?

CVT transmission belongs to the automatic transmission category, and it is also a continuously variable transmission. Continuously variable transmission is one type of automatic transmission, which refers to a transmission system that can continuously obtain any transmission ratio within the range. Through continuously variable transmission, the optimal matching between the transmission system and the engine operating conditions can be achieved. The advantages of CVT transmission include the following 4 points: 1. High fuel economy: CVT can achieve continuously variable transmission within the range, thereby obtaining the optimal matching between the transmission system and the engine operating conditions, improving the overall fuel economy of the vehicle; 2. Good power performance: Due to the continuously variable transmission characteristics of CVT, it can obtain the maximum transmission ratio of reserve power, so the power performance of CVT is better than that of mechanical transmission (MT) and automatic transmission (AT); 3. Low emissions: The wide working range of CVT speed ratio can make the engine work under optimal conditions, thereby improving the combustion process and reducing exhaust emissions; 4. Low cost: The CVT system has a simple structure and fewer parts than AT. Once automobile manufacturers start mass production, the cost of CVT will be lower than that of AT.
17
5
Share

How to Drive Straight When Learning to Drive?

Here are the techniques for driving a car straight: 1. Look ahead: The first thing to learn about driving straight is to look ahead, preferably at a point about 100 meters in front. Many beginners struggle with this because they tend to focus on their own driving actions inside the car. 2. Pay attention to gear coordination: Before driving straight after a turn, try to stay in 3rd gear and apply slight brake pressure while turning. Otherwise, if you downshift to turn and then immediately need to upshift for straight driving, you may become flustered and fail to align the car properly. 3. Accelerate to the required speed in advance: Factors such as incorrect wheel alignment, uneven tire wear, or uneven force applied to the steering wheel can cause the car to drift during acceleration or deceleration. The correct approach is to accelerate to the required speed before entering the straight driving assessment area and then maintain a steady speed. 4. Make fine adjustments: The key to fine adjustments is not to let the force from your shoulders and elbows transfer to the steering wheel, as even slight tremors can be amplified. The correct method is to relax and hold the wheel steadily. Fine adjustments must be made early; as soon as you notice a slight misalignment between the car's position and the lane markings, you should start adjusting immediately.
13
3
Share

Does the illumination distance of motor vehicle lights at night change from near to far?

Distance changing from near to far occurs when transitioning from a curve to a straight section. The methods for judging road conditions and terrain while driving with lights at night are as follows: 1. Method one: If you notice that the illumination distance of your car's headlights changes from far to near while driving, the road ahead may be entering a curve with a mountain or barrier on one side, reaching the low point of a slope, or approaching or entering an uphill section. 2. Method two: If you notice that the illumination distance of your headlights changes from near to far while driving, the road ahead may be transitioning from a curve to a straight section, entering a downhill slope, changing from a gentle downhill to a steep downhill, or transitioning from a downhill slope to level ground. 3. Method three: If you notice that the headlight illumination leaves the road surface while driving, the road ahead may have a sharp curve, a large pothole, or be reaching the top of a slope. 4. Method four: When the illumination shifts from the center of the road to the side, the road ahead may have a regular curve or a series of curves. In the case of a series of curves, the illumination will shift from one side of the road to the other accordingly.
3
1
Share

Why Can't the One-Button Start Ignite the Engine?

Reasons and solutions for the one-button start failing to ignite the engine are as follows: 1. The steering wheel is locked, preventing ignition. If the steering wheel is not straightened when parking and remains at a slightly larger angle, it will automatically lock as an anti-theft measure. In this case, the key may not turn, causing ignition failure. Solution: Apply force to turn the steering wheel while simultaneously turning the key to unlock the steering wheel, then attempt to start the engine. 2. The smart key for the one-button start may have a low battery. Even if the key is inside the car, the dashboard may display 'key matching error' due to the weak signal emitted by the low-battery smart key, which the start system cannot detect. Solution: Place the smart key directly on the start button and then press the button to start. If the remote key has a low battery or fails to match correctly for other reasons, insert the key into the emergency backup key slot and press the start button to ignite the engine. 3. For new cars, the brake pedal must be pressed before using the one-button start. Pressing the start button without depressing the brake only activates the vehicle's electrical system but does not start the engine. Solution: Press the brake pedal before using the one-button start.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.