Does the Corolla have a reverse camera?

1 Answers
Wood
07/30/25 10:46am
The base model of the Corolla does not come with a reverse camera, while the higher-end models are equipped with one. Below is relevant information about reverse cameras: Introduction to Reverse Cameras: A reverse camera, also known as a parking assist system, reverse visual system, or vehicle monitoring system, is referred to in English as a vehicle-backup-camera. This system is widely used in various large, medium, and small vehicles for reversing or driving safety assistance. Advantages of Reverse Cameras: Installation is simple. Generally, a standard single-output reverse camera only requires connecting the positive wire of the power link to the positive terminal of the vehicle's reverse light power, and the negative wire of the power link to the negative terminal of the reverse light or to ground (GND). The wiring can be easily figured out based on the vehicle model, and the camera can be installed by drilling a hole in a convenient location.
Was this review help?
14
5
Share
More Forum Discussions

Can I Change My Car's Engine Oil Myself?

Certainly, you can change your car's engine oil by yourself, but it requires the owner to understand the operational procedures and have the necessary tools for disassembly. If the owner does not meet the conditions for changing the oil themselves, it is advisable to visit a 4S shop or a professional and formal repair shop. Below is some relevant information about car engine oil: 1. Introduction One: Engine oil, commonly referred to as engine lubricant. 2. Introduction Two: It serves to lubricate and reduce friction in the engine, assist in cooling, seal against leaks, prevent rust and corrosion, and act as a shock absorber. 3. Introduction Three: It is hailed as the "blood" of the car, consisting of base oil and additives, and car engine oil has a replacement cycle.
4
3
Share

Is a car battery voltage above 14V normal?

Car battery voltage of 14V is considered normal. The normal voltage of a car battery is approximately 13V, with a load voltage not less than 11V. Below this voltage, starting the car may be difficult. After starting, as the alternator begins generating electricity, the normal voltage of the car battery should be between 13.5V and 14.5V. Here are some related details about car batteries: 1. Detail one: Both excessively high or low battery voltage can have certain impacts. It's advisable to regularly check the battery's condition. If the battery voltage drops below 10.8V, it should be charged promptly. If the voltage is too low, the car may experience difficulty starting or even fail to start. Conversely, if the voltage is too high, it may damage the battery. 2. Detail two: The battery can be charged by the alternator while the car is running. If the car is parked for an extended period, the battery may lose charge, making it difficult to start the car. Therefore, during long-term parking, it's recommended to start the car at least once a week. The alternator will charge the battery, typically requiring idling for more than 5 minutes.
7
2
Share

What Are the Reasons for the Car Horn Sound Becoming Quieter?

The reasons for the car horn sound becoming quieter are as follows: 1. Original volume of the audio file: The music file itself has a low bitrate and low volume; 2. Volume of the software player: The software player must also be turned to maximum, otherwise there will naturally be no sound. Check this issue, and if it is the problem, adjust the volume to an appropriate level; 3. Electromagnetic interference: The causes are relatively complex, electrical equipment connected or not connected to the computer may cause electromagnetic interference. It is relatively easy to check—if the interference weakens, the volume will return to normal. You can try reconnecting the speaker plug; 4. Speaker volume knob—turn it to maximum for troubleshooting; 5. The speaker's fine wire may be broken, or the speaker cone may be damaged; 6. Short circuit in the speaker output, causing the car audio amplifier to short circuit and enter output protection mode, resulting in very low sound; 7. Damage to the amplifier block; 8. The gap of the diaphragm contact has changed: Adjusting the small screw for the contact gap on the horn can restore the sound to normal.
8
5
Share

How to Change the Area of a Temporary License Plate?

You can submit an application at the local vehicle management office. Once approved, the type of temporary license plate can be changed. Temporary license plates are valid nationwide and have the same legal effect as regular license plates. Temporary license plates for motor vehicles have a specific validity period, and they become invalid once this period expires. Below is an introduction to the process of applying for a temporary license plate: 1. Online Vehicle Management Office: Log in to the online vehicle management office page and follow the instructions to complete the application for a temporary license plate online. 2. Offline Vehicle Management Office: Bring the required supporting documents to the vehicle management office, and with the assistance of the staff, you can complete the application for a temporary license plate. 3. Traffic Brigade or Traffic Division: You can visit any traffic brigade or traffic division's vehicle management station to apply for a temporary license plate for your vehicle. 4. Authorized 4S Store: You can authorize a 4S store to handle the application for a temporary license plate on your behalf. Generally, 4S stores charge a fee of 10–20 yuan for processing temporary license plates.
12
3
Share

What Causes the Squeaking Sound When Lightly Pressing the Brakes?

There are three main reasons for squeaking sounds when lightly pressing the brakes: 1. Sand or other foreign objects in the brake disc: When lightly pressed, the friction between the foreign objects and the brake pads produces a harsh sound. In this case, cleaning the brake pads can help. 2. The brake pads are too hard: Consider replacing them with silent brake pads. 3. Severe wear of the brake pads: If the friction surface of the brake pads is completely worn out, it will cause brake noise, and replacing the brake pads can solve the problem. Methods to determine whether the brake pads need replacement are as follows: 1. Thickness: The normal thickness of brake pads is about 10mm. If it is below 6mm, they should be replaced. 2. Sound: If the car frequently makes abnormal noises when braking, it indicates severe wear of the brake pads, and they should be replaced. 3. Pedal feel: When the brake pads are severely worn, their braking force decreases, so pressing the brakes will feel weak. At this point, the brake pads should be replaced promptly.
3
5
Share

What three certificates are required to drive a taxi?

The documents required to drive a taxi include ID card, driver's license, professional qualification certificate, internal work permit, service supervision card, and local permanent residence registration or residence permit. Below are detailed steps for obtaining a taxi driver's professional qualification certificate: 1. Application: After completing training at a qualified institution, apply for the taxi driver's professional qualification certificate from the relevant authorities. 2. Vocational training and exam registration: Complete the required training content and hours. Submit the application to the relevant authorities. The municipal transportation management office reviews the application form and issues an exam admission ticket to eligible candidates. 3. Take the professional driver qualification exam: Use the exam admission ticket and ID card to participate in the theoretical and practical exams organized by the municipal transportation management authority.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.