Does the coating look ugly after one year of peeling off?

2 Answers
KarterDella
08/27/25 2:20am
Coating does not look ugly after one year of peeling off. Due to the appropriate increase in resin polymer content in current coating products, while maintaining the original hardness and protective properties, the thickness of the coating is reduced, and the bonding force with the car paint is increased. After the expiration of the validity period, washing the car can make it wear off evenly, avoiding problems such as partial cracking and peeling in the later stage. The following is a specific introduction about coating: 1. Introduction to coating: Coating is a hard protective coating specially used for the care of key parts such as car paint, glass, tires, rims, seats, engines, interiors, and exterior trim strips. The material composition of coating is mainly divided into three categories: polysiloxane, polysilazane, and inorganic silicon. 2. Precautions after coating: Do not rinse the vehicle within one week after coating. The coating agent needs 24 hours to fully combine with the car paint and form the final crystal protective layer on the paint surface. Four to six months after coating, you can go to a beauty shop for paint surface mirror restoration and repair to make the coating effect better and last longer. After coating, try not to touch the paint surface to avoid affecting the final coating effect.
Was this review help?
13
4
Share
LeIker
09/08/25 9:02am
After getting my car coated with crystal last year, it looked stunning for the first six months—water beads wouldn’t even cling to the surface. But early this year, I noticed the hood started looking like it had dandruff, with several patchy, whitish areas. The car wash attendant said it was the coating aging and peeling, especially noticeable in areas frequently exposed to sun. Rainwater now leaves ugly watermarks, making the paint look moldy from a distance. The most annoying part is the transparent dividing line along the peeling edges, which stands out glaringly under sunlight. Now, I have to wash my car meticulously every weekend to prevent those dull patches from looking even dirtier. My advice? Regularly check the coating—if water stops beading, it’s time to consider reapplying. Otherwise, large-scale peeling can really ruin your mood.
Was this review help?
20
5
Share
Expand All
More Forum Discussions

How long after the driver's license expires must it be renewed?

Within 3 months before the expiration of the driver's license. Below are detailed explanations about the driver's license: 1. Relevant laws and regulations: According to the latest promulgated "People's Republic of China Motor Vehicle Driver's License Management Measures", Chapter 4, Article 22 stipulates that within 3 months before the expiration of the driver's license, the holder should go to the vehicle management office for renewal. The vehicle management office should conduct a physical examination, review whether traffic violations and accidents have been properly handled, and for those who pass the review, the driver's license should be renewed. 2. Others: The traffic police department reminds that if the driver's license is not renewed for more than one year after its expiration, or if drivers aged 60 or above fail to submit a physical condition certificate within one year after the end of a scoring cycle, the driver's license will be revoked. In addition, driving a motor vehicle on the road with an expired driver's license will be treated as driving without a license, subject to a fine of thousands of yuan and administrative detention for up to 15 days.
15
1
Share

What are the techniques for starting a motorcycle on a slope without stalling?

Here are the techniques for starting a motorcycle on a slope without stalling: 1. Ensure the motorcycle is in neutral: Only after shifting to neutral can you start the ignition. Many riders often overlook this step and start the ignition directly, which can easily cause the motorcycle to stall. 2. Start in first gear: When starting on a slope, quickly shift into first gear. Be careful not to select the wrong gear, as this can easily cause the motorcycle to stall. 3. Pay attention to throttle and RPM: Increase the engine RPM to around 3,000. Of course, the engine RPM can be adjusted based on actual conditions, as it is not a fixed requirement. 4. Slowly release the clutch: Release the clutch gradually, and after a certain period, reduce the throttle to keep the engine RPM within a reasonable range.
20
1
Share

What are the different gears on a motorcycle?

Motorcycle gears are mainly divided into two types: sequential shifting (also known as international shifting) and rotary shifting. Here are the details: 1. International shifting: Wide-range shifting involves pressing down for first gear and lifting up for fourth gear, while narrow-range shifting involves pressing down for first gear and lifting up for fifth gear. 2. Rotary shifting: It can be either five-speed or four-speed. Continuously pressing down will cycle through gears 1, 2, 3, 4, 5, and 0, with neutral located between first and second gears. The Honda 500cc model uses a press-down-for-first, lift-up-for-fourth shifting pattern. Rotary shifting is generally used on motorcycles below 150CC, and these models often have a gear display. For beginners, continuously pressing down is easier, and there are fewer situations where downshifting is required on the road.
17
5
Share

How fast can a 125cc motorcycle go?

Domestic 125cc motorcycles can reach a maximum speed of 90-100 km/h. Here are some relevant details: 1. Motorcycle speed: Most motorcycles can reach 100 km/h, while more advanced models can achieve speeds of 180 km/h or even over 200 km/h. 2. Single-cylinder 125cc motorcycle power: Typically, single-cylinder 125cc motorcycles have a power output of 7 to 8.3 kW, while 150cc single-cylinder models generally range from 8.8 to 11 kW. Due to variations in engine technology among different manufacturers, the power output of engines can differ. Engine power is influenced by factors such as displacement, vehicle weight, and engine technology (e.g., turbocharging), so not all 125cc motorcycles will have the same power output. Since engine power is related to RPM, there will inevitably be differences in the power curve (essentially the torque characteristic curve) of the engine.
3
3
Share

Can the central control screen of Lavida Plus be replaced?

plus central control screen can be replaced, you can choose whether to replace it according to your needs, and the replacement is also relatively quick and convenient. More detailed introduction is as follows: 1. The central console LCD screen is an LCD display located in the middle of the central console: it can display basic information such as time, temperature, date, audio, etc. It is generally used as an information display device for the multimedia control system, electronic navigation system, and reverse assistance system. It can also be used as a display screen for car TV and DVD. With the central LCD display, the driver can always understand the vehicle information, making the driver drive safely and happily. 2. Screen display feedback: The central console LCD screen is just an intuitive display that gives you a screen display feedback when you press the central control. This LCD screen cannot be used for navigation, only some simple display information. For example, when reversing, if there is a reversing radar, the distance can be clearly displayed on the central LCD screen. There is also a central integrated display that integrates navigation, DVD, and reversing images. This function is wider, the display is clearer, and more direct! The former is simpler, more practical, and cheaper. The latter is clearer and easier to read, but the cost is more expensive because it involves brands, integration, etc.
19
2
Share

What is the reason why a motorcycle cannot start when the fuel is overfilled?

The reasons why a motorcycle cannot start when the fuel is overfilled are as follows: 1. The spark plug has high-voltage electricity and needs to be replaced; 2. The carburetor has no gasoline. It is recommended to loosen the carburetor drain screw to see if fuel flows out. If not, gasoline needs to be injected; 3. The carburetor is clogged. Clean the carburetor thoroughly; 4. The air filter and exhaust pipe are clogged and not ventilating. Replace or clean them. The hazards of overfilling a motorcycle's fuel tank: 1. Affects the performance of activated carbon: If the fuel tank is overfilled, the remaining space in the tank is relatively small, and with more gasoline, more volatile gasoline will enter the carbon canister. Over time, the carbon canister will fill with gasoline and produce particles, affecting the normal function of the activated carbon. 2. Causes fuel tank self-ignition: If the fuel tank is consistently overfilled and the domestic fuel quality is not good, the fuel hole of the carbon canister may become clogged, leading to excessive fuel tank pressure until cracks or loose rivets cause fuel leakage. This can easily result in self-ignition when exposed to sparks or hot weather.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.