Does the Classic Sylphy have ESP?

At how many kilometers does a Scirocco need an overhaul?

It depends on the vehicle condition. Domestic vehicles generally require an overhaul after about 100,000 kilometers, while imported vehicles need it after over 100,000 kilometers. There are three scenarios for determining when an engine needs overhaul: 1. Severe oil consumption with blue smoke emission but no oil leakage; or serious black smoke emission from the engine. In this case, measure cylinder pressure using a cylinder pressure gauge. If the pressure is below normal value, an overhaul is necessary. 2. Abnormal engine noises, which require disassembly for confirmation. When abnormal noises are detected, use an engine noise detector for measurement. Reasons for overhaul: After reaching certain years or mileage, severe wear and aging of internal engine components lead to significant power performance decline. At this stage, replacing valves, pistons, cylinder liners, cylinder boring, and crankshaft grinding becomes essential. Post-overhaul, engine performance can recover over 90% of its original state.

1

Share

What level of car does the Yeti belong to?

The Yeti belongs to the small-sized SUV category. The Yeti is a small SUV under the Skoda brand, which has been discontinued. This model was equipped with three engines in total: a 1.4-liter turbocharged engine, a 1.6-liter naturally aspirated engine, and a 1.8-liter turbocharged engine. The 1.4-liter turbocharged engine has a maximum power of 110 kilowatts and a maximum torque of 250 Newton-meters, with the maximum power achieved at 5000 revolutions per minute and the maximum torque between 1750 to 3000 revolutions per minute. The 1.6-liter naturally aspirated engine has a maximum power of 81 kilowatts and a maximum torque of 155 Newton-meters, with the maximum power achieved at 5800 revolutions per minute and the maximum torque at 3800 revolutions per minute. The 1.8-liter turbocharged engine has a maximum power of 118 kilowatts and a maximum torque of 250 Newton-meters, with the maximum power achieved between 4500 to 6200 revolutions per minute and the maximum torque between 1500 to 4500 revolutions per minute.

2

3

Share

What is Chery's service brand?

Chery is the first independent Chinese automaker to launch a service brand, and its service brand is the company itself. Service Brand: A service brand generally includes five major systems: service brand philosophy, service brand behavior, service brand image, service brand communication, and service brand management. To create a service brand, the first step is to establish the name of the service brand. Generally, there are two options: using the product brand or creating a new brand. Key Features: Personalization: A service brand must be able to provide high-quality personalized service content and convey a personalized brand philosophy. Standardization: A service brand should have standardized service norms. For example, Walmart's "3-Meter Smile" standard and Gome's "3-Meter, 3-Voice" service. Customer Experience: A service brand is established through long-term service experiences of consumers and repeated communication between the company and consumers. The core of service brand building lies in customer experience.

18

2

Share

What does it mean when the engine exhaust system warning light comes on?

When the engine exhaust system warning light comes on, it indicates that the three-way catalytic converter in the car's exhaust pipe has failed. At this point, the engine will limit power output, causing the vehicle's exhaust emissions to exceed standards, which can affect annual inspections. The exhaust pipe of a car contains a three-way catalytic converter, which is installed in the front section of the exhaust pipe. The three-way catalytic converter is used to purify exhaust gases. After the engine's exhaust gases pass through the three-way catalytic converter, the levels of harmful and toxic substances are reduced. There are oxygen sensors located before and after the three-way catalytic converter. The front oxygen sensor is used to measure the oxygen content in the exhaust gases. This sensor sends data to the ECU, which adjusts the engine's air-fuel ratio based on this data and other inputs. The rear oxygen sensor, located after the three-way catalytic converter, is primarily used to detect whether the catalytic converter has failed. If the data sent to the ECU by the front and rear oxygen sensors are the same, it indicates that the three-way catalytic converter has failed, and the engine warning light on the car's dashboard will illuminate.

18

4

Share

Where is the tire pressure reset button on the New Baojun?

The tire pressure reset button on the New Baojun is located near the steering wheel, marked with a tire pressure icon. After confirming there are no issues, press the button to reset the tire pressure. Hazards of low tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption. Causes heavy steering and tendencies to drift, posing risks to driving safety. Increases movement in various parts of the tire, leading to excessive rolling and abnormal heat generation. Reduces the functionality of the cords and rubber, causing delamination or cord breakage, excessive friction with the rim, and damage to the bead area, resulting in abnormal wear. Hazards of high tire pressure: Reduces tire friction and adhesion, affecting braking performance. Causes steering wheel vibration and drifting, reducing driving comfort. Accelerates wear on the central tread pattern, shortening tire lifespan. Increases vehicle vibration, indirectly affecting the lifespan of other components. Overextends the tire cords, reducing elasticity and increasing the load on the vehicle during driving. Decreases puncture resistance. When encountering sharp objects like nails or glass, the tire is more prone to punctures, leading to internal cracks, blowouts, or tire bursts.

9

3

Share

Why is there no response when shifting gears in a Mercedes-Benz?

There is no response when shifting gears in a Mercedes-Benz, which could be due to two main reasons: first, the brake switch is damaged; second, there is a malfunction in the internal mechanism of the gear shift assembly. Identifying the source of the fault: Turn the ignition switch (EIS) to the ON position or start the engine. Place the palm of your hand on the head of the gear shift lever and press the brake pedal. If there is no vibration felt in the palm after pressing the brake pedal or pressing it multiple times, it indicates that the brake switch is damaged and needs to be replaced. If vibration is felt in the palm every time the brake pedal is pressed, it means the brake switch is functioning properly, and the issue lies in the internal mechanical components of the gear shift assembly. Solution: Replace the gear shift mechanical assembly. Since the plastic clip that locks the gear shift lever is not available as a separate part, the entire gear shift mechanical assembly must be replaced. This repair method is costly. Additionally, after replacing the gear shift mechanical assembly, because the Electronic Shift Module (ESM) is integrated within it, the Mercedes-Benz specialized diagnostic tool must be used for coding. Otherwise, even after replacing the assembly, the gears cannot be shifted. Repair shops and service centers with the specialized diagnostic tool typically adopt this repair method.

13

2

Share

Does the Classic Sylphy have ESP?

At how many kilometers does a Scirocco need an overhaul?

What level of car does the Yeti belong to?

What is Chery's service brand?

What does it mean when the engine exhaust system warning light comes on?

Where is the tire pressure reset button on the New Baojun?

Why is there no response when shifting gears in a Mercedes-Benz?

How many liters of engine oil are needed for a Haval F5 oil change?

What are the reasons for the yellow engine light in the Buick Excelle?

Does the Infiniti G37 have a coupe model?

What to do if the rear inner fender liner is broken?