Does the Chery Ant second-hand car come with a warranty?

2 Answers
EmersynDella
07/25/25 4:09pm
Chery Ant second-hand cars do come with a quality warranty. For second-hand Chery Ant vehicles, the warranty covers 5 years or 120,000 kilometers. The lifetime warranty for Chery Ant new energy vehicles is conditional. This lifetime warranty only applies to the first owner, and non-commercial vehicles are covered for the three-electric system warranty, which includes the motor, battery cell, and electronic control. In simple terms, the car's lifetime warranty means that if the vehicle itself has quality issues within the warranty period specified by the manufacturer, it can be repaired or replaced free of charge. The car warranty of 5 years or 120,000 kilometers covers specific items: the whole vehicle warranty means that various components can be replaced free of charge if they are confirmed to be damaged due to quality issues rather than human factors, such as the speedometer or air conditioning components. If these issues occur within the warranty period or the specified mileage, they can be repaired free of charge. The powertrain warranty refers to the engine and transmission. If these two components have quality issues, they will be covered under warranty, provided that the vehicle is regularly maintained at a 4S shop according to the maintenance manual. The whole vehicle warranty does not mean that every component enjoys the same warranty service; instead, warranties are provided for different components separately.
Was this review help?
9
0
Share
Felicity
08/11/25 9:41pm
I know quite a lot about the Chery eQ1 (Little Ant) as it's a popular micro electric vehicle. When new, the car comes with a manufacturer's warranty, typically 3 years or 100,000 kilometers, with a longer battery warranty of 8 years or 120,000 kilometers. However, for used cars, the warranty doesn't automatically transfer—it depends on whether the original warranty period is still valid. If the car is relatively new, say only one year old, the remaining warranty can be transferred to the new owner, but this requires going through formal procedures. For older cars, the warranty might no longer apply. I recommend checking the car's maintenance records and accident history before purchasing—don't just rely on the seller's word. Some used car dealers offer extended warranties for an additional cost, which can be a worthwhile investment (a few hundred yuan for extra coverage). After all, EV repairs can be expensive, and without a warranty, a battery issue could become a major headache. Always consult with professional mechanics—safety first.
Was this review help?
3
2
Share
Expand All
More Forum Discussions

What are the requirements for the Subject 3 driving test?

Subject 3 test requirements are as follows: 1. Observe the surrounding road conditions: Before starting, the candidate needs to observe the surrounding road conditions to determine if it is suitable to start. If the candidate starts without observing, the safety officer may suspend the test on the grounds of "dangerous driving." Road conditions should also be observed at intersections and other locations to avoid hazards. 2. Remember to fasten the seat belt: After adjusting the seat and mirrors, the candidate should immediately fasten the seat belt. Many people might forget due to nervousness and proceed directly to the starting operation, but the test could end before the starting action is completed. 3. Match gear speed appropriately: When passing crosswalks, school zones, bus stops, and other locations, it is necessary to slow down and shift to a lower gear in advance. During the test, candidates might be too nervous and only remember to shift down but forget to slow down, resulting in a mismatch between gear and speed, causing the car to shake continuously and leading to a failed test.
11
4
Share

What does recording iris for driver's license mean?

Iris is a more advanced identity verification system, and recording iris for driver's license can prevent cheating. The following is the relevant introduction about iris: 1. Introduction: The iris is a flat circular ring-shaped film in the middle layer of the eyeball wall, located between the cornea and the lens, and can be seen through the cornea, commonly known as the "black eyeball". There is a small round hole in the center called the pupil, through which light enters the eye. The iris is mainly composed of connective tissue, containing pigment, blood vessels, and smooth muscle. The color of the iris varies depending on the amount and distribution of pigment, generally including black, blue, gray, and brown. 2. Precautions: During iris registration and examination verification, naked eye collection is required, and wearing contact lenses, colored contacts, or glasses is prohibited; during registration and verification, please keep your eyes close to the distance measurement, open your eyes wide, and align with the center of the device's bright spot; when the registration process begins, try to open your eyes as wide as possible to collect high-quality iris identity information.
4
3
Share

Why is Subject 4 always under processing?

Displaying 'under processing' means it is under review, checking whether the study hours are valid, the authenticity of the trainee's information, etc. The review usually takes 3-7 days, and the update of the information query system requires some time. Trainees can check again after some time. If the appointment is successful, generally about 3 days before the exam, you will receive an SMS reminder of a successful or failed appointment. At that time, bring your ID card to the designated venue for the exam. If the appointment fails, it may be because the appointment ranking exceeds the exam capacity, and you can rebook after one exam cycle (about 10 days). The following are the precautions for answering Subject 4 questions: 1. Note 1: The answering time for Subject 4 is 45 minutes, with 50 questions. There is plenty of time, so think carefully when answering to ensure accuracy. 2. Note 2: Leave questions you don't know or are unsure about for last. The system sets one-time questions. One-time means answered questions cannot be modified. A score of 90 is passing. If you fail the first time, you can answer a second time. For the second attempt, you need to re-enter your ID number.
12
5
Share

What Causes the Door Seal to Squeak When Driving on Rough Roads?

There are several possible reasons for the squeaking sound from the door seal when driving on rough roads. Door Squeaking: If you're unsure whether the noise is coming from the front or rear door, find a rough road section to ensure the sound occurs at low speed. With the seatbelt fastened and ensuring driving safety, slowly open the driver's side door and continue driving. If the noise persists, it indicates the rear door is the source. Have a passenger in the back perform the same test to confirm which door is squeaking. Seal Rubber or Door Lock Squeaking: Cut newspaper into 10 cm wide strips and place them between the seal and the door contact surface in sections. Close the door tightly and drive to test. If the noise disappears, it indicates friction from the seal rubber. If the noise persists, the seal rubber can be ruled out. Generally, cars within 3 years of use experience seal rubber squeaking. Door Lock Squeaking: Wrap a layer of insulating black tape around the door lock striker. Close the door tightly and drive. If the noise disappears, it confirms that the squeaking is caused by friction between the door lock hook and the striker.
16
5
Share

Can You Drive in First Gear for Subject Three?

Yes. During the Subject Three road test, the maximum distance you can drive in first gear should not exceed 200 meters. It is best to shift to second gear after starting and confirming safety. Below are some tips for the Subject Three test: 1. Tip One: Before getting into the car, regardless of the car's position, remember to walk around the front of the car from the right side to the driver's seat. Check for any obstacles. Then, look behind to see if any vehicles are approaching. Ensure safety before opening the door to enter. Close the door gently and hand your prepared documents to the examiner with both hands. 2. Tip Two: After the inspection, report to the examiner that the instruments are normal and ask if you can start. Once permitted, press the clutch, shift into first gear, and turn on the left turn signal. Honk the horn and check the rearview mirror to ensure safety before partially releasing the clutch to start. Simultaneously release the handbrake for a smooth start. After successfully starting, do not rush to turn left immediately; continue straight and shift to second gear. If on a slope, use first gear. Maintain speed in second gear and shift to third gear when exceeding 30 km/h. 3. Tip Three: When you hear the command to pull over, calmly turn on the right turn signal. Check the right rearview mirror; if there are no vehicles, turn right while pressing the brake and clutch, using the fixed-point parking method to stop within 30 cm of the roadside. Straighten the wheels, park steadily by the roadside, and shift to neutral. Release the brake and clutch, turn off the turn signal, and unfasten the seatbelt.
13
3
Share

What Are the Eight Common Engine Faults?

Here is an introduction to the eight common engine faults: 1. Engine cold start shaking: The engine shakes during cold start idling but returns to normal after warming up. The main reason is excessive carbon deposits inside the engine. During cold starts, the fuel injected by the injectors is largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture and causing difficulty in starting. 2. Engine hot start shaking: The engine shakes during hot idle. There are many reasons for hot idle shaking, the most common being engine misfire. Generally, check the spark plugs, ignition coils, fuel injectors and fuel lines, and whether the exhaust is blocked. 3. Engine abnormal noise: Engine abnormal noise is divided into cold start noise and hot start noise. Cold start noise is mostly caused by the oil flowing back to the oil pan after the car has been parked for a long time. During cold starts, the oil pump cannot immediately establish oil pressure to form an oil film, and the parts are not lubricated, causing noise. 4. Engine carbon deposits: Carbon deposits are mainly formed due to incomplete combustion during engine operation, along with the gummy substances produced by impurities in fuel and oil during combustion, which accumulate over time. Carbon deposits can cause cold start engine shaking, idle engine shaking, and reduced power. 5. Throttle frequently dirty: The main reason for a dirty throttle with carbon deposits is the reciprocating airflow during the engine's intake and exhaust strokes. Not only does it draw in air during intake, but also gas reflux into the intake manifold during valve overlap, leading to carbon deposit formation. The solution is simple: clean the throttle. 6. Engine burning oil: The reasons for burning oil are usually incorrect oil grade, aging or damage to the valve oil seal, piston ring sealing failure causing oil leakage, damage to the oil separator or crankcase ventilation, or cooling and lubrication issues at the turbocharger. 7. Engine oil leakage: Engine oil leakage is mostly caused by aging sealing gaskets. Common leakage areas include aging or damaged oil pan gaskets, loose oil drain plugs, etc. 8. Engine overheating: Engine overheating is mainly manifested as an engine temperature warning or boiling. The causes of overheating are often due to a faulty thermostat losing its ability to regulate the cooling cycle, a dirty radiator reducing cooling efficiency, insufficient coolant, or air trapped in the cooling system.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.