Does the CFMoto 250SR have a twin-cylinder engine?

1 Answers
ElainaFitz
07/30/25 1:59am
CFMoto 250SR does not have a twin-cylinder engine; its engine type is a single-cylinder. The CFMoto 250SR is equipped with a single-cylinder, liquid-cooled, in-line single-cylinder engine with an actual displacement of 249.2cc: In terms of handling performance, the CFMoto 250SR features a single-cylinder, liquid-cooled engine with a displacement of 249cc. It uses a 6-speed chain transmission, consistent with mainstream models, further improving its power smoothness. It is equipped with ABS-CBS and a slipper clutch, enhancing safety. The engine is matched with electronic fuel injection: It achieves a leading torque value of 22 Nm in its class, enabling a maximum power output of 20.5 kW.
Was this review help?
2
2
Share
More Forum Discussions

How much to turn back when seeing the corner during reverse parking?

Reverse parking requires straightening the wheels when seeing the corner. Below is relevant information about reverse parking: 1. Overview: Reverse parking became a mandatory test item for obtaining a small car driver's license after 2013. It assesses the driver's ability to maneuver the vehicle in a confined space. Reverse parking is an evaluation point in the driver's test, requiring proper vehicle control to enter the garage from both sides while moving. There's a time limit for reverse parking during the test. 2. Methods: There are three most common reverse parking techniques. The first is 'non'-shaped reverse parking, commonly seen in large shopping malls. The second is roadside 'one'-shaped reverse parking, also known as parallel parking. The third is the less common diagonal reverse parking. 70% of driving school students find parallel parking more challenging.
16
3
Share

How to reset the maintenance light on a Haval H6 after servicing?

The function of the maintenance light is to record the mileage of some important components, serving as a reminder for car owners and maintenance personnel. After car maintenance, it is essential to reset the maintenance light; otherwise, the owner cannot accurately track the usage time of new components during the next replacement. The steps to reset the maintenance light on a Haval H6 are as follows: 1. Turn off the ignition switch; 2. Press and hold the "single reset" button on the combination instrument panel; 3. Turn on the ignition switch; 4. The odometer display will begin a countdown until it shows 0000.0, then release the button; 5. The maintenance reminder light on the dashboard will turn off.
15
3
Share

What Does an Exclamation Mark Represent in a Car?

When an exclamation mark appears on the car dashboard, it indicates one of five possible scenarios: general malfunction, automatic transmission failure, brake system issue, abnormal tire pressure, or lighting system fault. Below is a detailed analysis of each situation: General Malfunction: A triangle with an exclamation mark inside signifies a malfunction in the car's general performance, components, or functions. Common causes include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor issues. It is recommended to visit a 4S shop for diagnosis and repair to identify the root cause. Automatic Transmission Failure: A yellow gear with an exclamation mark indicates an automatic transmission fault warning, suggesting either a transmission malfunction or insufficient transmission fluid. Immediate replacement of transmission fluid is advised. Brake System Issue: An exclamation mark inside a circled parenthesis serves as a brake system alert, typically signaling brake system failure or low brake fluid levels. Immediate inspection and repair of the brake system are crucial to prevent accidents. Abnormal Tire Pressure: An exclamation mark below a horizontal line within a parenthesis represents the tire pressure monitoring warning light, which illuminates when tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting System Fault: A yellow bulb with an exclamation mark indicates a lighting system fault, alerting the driver to a malfunctioning light. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue.
18
4
Share

How to Repair a Peeling Steering Wheel?

There are three solutions for a peeling steering wheel. Below are the solutions for a peeling steering wheel: 1. For a scratched genuine leather steering wheel, you can go to a professional shoe repair shop: The craftsman will perform leather beauty treatment based on the specific situation, carefully repairing the scratches and worn areas, and reapplying color to faded spots. After professional treatment, the repaired leather will hardly show any visible signs of repair. 2. Steering wheel wear repair - Replacement: The most straightforward, yet also the most expensive solution is to replace it. 3. Steering wheel wear repair - Auto repair shop: You can entrust the issue to an auto repair shop or beauty shop. Many repair shops offer interior cleaning, care, and refurbishment services, using genuine leather refurbishment techniques to maximally repair issues such as fading, wear, staining, and aging on the steering wheel.
9
3
Share

Why is it necessary to shift gears?

The reason for shifting gears while driving is to frequently change gears according to actual conditions (except on highways) to save fuel and improve engine efficiency. On highways, when quickly accelerating to speeds above 60 km/h, the 5th gear is generally used with minimal shifting required. However, gear shifting becomes necessary when road conditions are poor. When driving on urban roads, rural roads, or mountain paths, gear shifting should be more frequent to select appropriate speeds based on road conditions. Below are precautions for driving on highways: 1. Drive in the designated lane: Highways have clearly marked lanes for large vehicles, small vehicles, etc. After overtaking, promptly return to your original lane and avoid occupying other lanes for extended periods. Additionally, emergency lanes should not be occupied without special reasons. 2. Maintain safe speeds and avoid speeding: The dangers of speeding are well-known, as it can lead to irreversible consequences both on local roads and highways. 3. Maintain safe following distances: Under normal conditions with dry roads and good braking, the following distance (in meters) should not be less than the speed (in km/h). For example, maintain at least 80m at 80 km/h and 100m at 100 km/h. Always pay attention to roadside distance markers. In rainy, foggy, snowy, or wet road conditions, the following distance should be doubled. 4. Observe traffic signs: Always pay attention to roadside and overhead signs and markings, and drive appropriately to the right to avoid crossing the right lane divider, allowing sufficient lateral distance for overtaking vehicles. 5. Do not occupy emergency lanes unnecessarily: Traffic accidents are inevitable on highways. If other vehicles cause lane blockages due to accidents, avoid occupying emergency lanes arbitrarily, as this may hinder rescue operations. 6. Avoid fatigue driving and take timely breaks: Fatigue driving is extremely dangerous on highways. When fatigued, reaction times decrease, making it difficult to respond correctly to emergencies.
10
1
Share

What is the model of the Jetta VS5's transmission?

Jetta VS5 is equipped with the Aisin third-generation 6AT transmission, model code AQ250. Below is some knowledge about transmissions. Functions of a transmission: To alter the gear ratio between the engine and wheels. This allows the engine to operate under optimal conditions, expands the torque and speed transmitted from the engine to the drive wheels, and achieves varying speeds. It enables the vehicle to reverse and includes a neutral setting. Maintenance of transmission structural components: Daily maintenance of the transmission should focus on its structural parts, including gears, bearings, and different shafts. Regularly inspect the transmission gears for wear, chipping, or incorrect meshing. Pay close attention to bearing inspections, noting excessive axial or radial clearance and wear on spacers. Proper care and inspection of internal transmission components ensure optimal operation and timely identification and resolution of issues.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.