···
Log in / Register

Does the Camry have a particulate filter?

4 Answers
HadleyFitz
07/29/25 1:17am

Toyota Camry does not have a particulate filter. A particulate filter is a ceramic filter installed in the exhaust system of diesel engines, which captures particulate emissions before they enter the atmosphere. Function of the particulate filter: The particulate filter can reduce soot produced by diesel engines by more than 90%, and the captured particulate emissions are subsequently burned off during vehicle operation. To check if a vehicle is equipped with a particulate filter, you can use the following 3 methods: Check the "Owner's Maintenance Manual" and "Owner's User Manual" to see if there is a particulate filter function. Additionally, you can carefully review the fault codes in the manual to see if there is a "Particulate Filter" warning light indicator. Check the label on the oil cap. If the oil cap clearly indicates 0W-20 grade oil, it means the vehicle is equipped with a particulate filter. Look behind the three-way catalytic converter on the exhaust pipe to see if there is a cylindrical section. If there is, that is the particulate filter.

Was this review help?
20
5
Share
VanDonovan
08/12/25 11:03am

The modern Camry typically comes equipped with a particulate filter in its newer models, especially in regions with stringent emission standards like China's National VI-b compliant markets. As a long-time Camry owner, I can confirm that this small device is installed on the exhaust pipe to filter particulate emissions, protecting the environment while complying with regulations. While it certainly makes driving more eco-friendly, there are drawbacks—frequent stop-and-go city driving can easily clog the particulate filter, leading to increased fuel consumption or warning lights. When this happens, I usually take the car on the highway for a half-hour drive to allow the system to regenerate and clear the accumulated soot automatically. During routine maintenance, I always remind the technician to pay extra attention to it to avoid future repair hassles. For owners, this device is a helpful tool, but learning proper usage habits is key to extending its lifespan. In markets like Europe, the U.S., or Japan, some base models may not include it, so checking the specific configuration before purchasing is essential.

Was this review help?
20
3
Share
Expand All
SanMadeline
10/02/25 2:10am

The new Camry is indeed equipped with a particulate filter. As a fan of automotive technology, I find this device quite ingeniously designed. It's an after-treatment system specifically designed to capture fine particles in the exhaust, reducing PM emissions. It's typically installed near the catalytic converter and automatically regenerates when operating temperatures are high. Driving with it makes the exhaust noticeably cleaner, especially providing peace of mind during smoggy days. However, I must mention occasional drawbacks - during low temperatures or short-distance driving, incomplete regeneration might trigger fault codes. The solution is simple and cost-effective: gently accelerate and drive on the highway for several dozen kilometers. You can check its status using diagnostic tools. Overall, the particulate filter makes the Camry more environmentally friendly and durable with low maintenance costs. When purchasing, prioritize models equipped with this feature as it enhances overall performance.

Was this review help?
6
5
Share
Expand All
McLuna
11/15/25 3:53am

The new Camry has added a particulate filter in many countries to help reduce air pollution. As an environmental supporter, I've come to realize its importance after driving for years. It filters harmful substances from exhaust gases, making driving less harmful to the environment. There are no issues with normal use, but frequent city traffic jams require occasional long-distance highway driving to clear carbon buildup. In design, this device quietly protects us without noise or power loss. Choosing this version when buying a car is more eco-friendly.

Was this review help?
1
2
Share
Expand All
More Forum Discussions

How to Wake Up 'Hello Volkswagen'?

You need to power on the vehicle. All electronic devices require power before they can be used. While driving, you can wake up the voice assistant by using the wake word. There is a voice button located on the right side of the steering wheel. After waking it up via voice, you just need to give commands to the voice assistant.
11
3
Share

How to Solve the Jerking Sensation When Releasing the Throttle on a Motorcycle?

Remove the air filter tube connected to the throttle body, but do not touch anything else, avoid pulling any wires randomly, and especially do not remove the throttle body. To prevent high idle speed after cleaning, have someone inside insert the car key and press the throttle to open the throttle body. Once the throttle body is open, proceed with the cleaning. After wiping it clean, reinstall the air filter tube. At this point, the throttle body is already clean, and you can start the engine and let it run for a while.
19
1
Share

How to activate the ambient lighting in BMW X3?

Press the round button on the left side of the steering wheel to activate the ambient lighting in BMW X3. Below is an introduction to the active ambient lighting: Introduction to active ambient lighting: In addition to simply changing colors like traditional ambient lighting, the active ambient lighting can also automatically perform certain changes. When communicating with the vehicle's infotainment system, the ambient light strip on the instrument panel displays the volume of speech (similar to an energy pulse oscilloscope). Conversely, when the infotainment system responds, it also performs corresponding actions, giving the car a sense of vitality. Functions of active ambient lighting: In dynamic mode, the colors can alternate and transform, with light and shadow flowing, creating a stunning visual effect. The active ambient lighting also interacts with the vehicle's intelligent driving assistance systems. For example, when the blind spot monitoring system detects an imminent collision, the interior ambient lighting can change to flashing red to alert the driver. Compared to the flashing indicators on the dashboard and rearview mirror, this method is obviously more intuitive.
14
1
Share

What to Do When the Windshield Leaks into the Cabin?

Carefully remove the windshield, clean off the original sealing material, and repair any damaged areas. Thoroughly clean the upper edge of the glass and sand down the leaking area, then dry it with an air gun. After ensuring the area is completely dry, apply black waterproof glass sealant. Reinstall the windshield using new sealant, paying attention to waterproofing. Use transparent tape to secure the edges of the windshield for stabilization, and remove the tape after 12 hours.
19
4
Share

How to Replace the Entire Vehicle Frame?

《Motor Vehicle Change Registration Application Form》、《Application for Motor Vehicle Change Verification Form》、Motor Vehicle Registration Certificate、Driving License、Standard Vehicle Photos. Submit the required documents to the Vehicle Archives Room on the second floor of the Vehicle Service Hall for file verification. Proceed to the Vehicle Inspection Hall to confirm the vehicle's compliance with regulations and obtain the 《Approval for Change Notification》. Submit the required documents to the Vehicle Service Hall for processing. If there is no Vehicle Identification Number (VIN) or frame number, you must go to a repair shop to engrave the original frame number and take a rubbing.
17
0
Share

How to Turn on the Natural Air Mode in Car Air Conditioning?

Generally, there is a button for internal/external air circulation in the car. Simply press the external circulation button until its light turns on to activate external air circulation. To turn off external circulation, press the external circulation button until its light turns off, which deactivates the external air circulation mode. If the external circulation button light is on, it indicates external circulation is active. Press the internal circulation button until its light turns on to switch to internal circulation mode. Press it again until the light turns off to return to external air circulation mode.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.