Does the BYD Tang DMI need to be charged?

1 Answers
LillianaAnn
07/28/25 5:04pm
BYD Tang DMI needs to be charged. The differences between BYD Tang DMI and Tang DM are as follows: 1. Power system: Tang DM is equipped with a 2.0T + plug-in hybrid, while Tang DMI is equipped with a 1.5 plug-in hybrid. 2. Motor: All DMI models feature a front-mounted single motor, available in two versions: 145kw and 160kw. In contrast, DM models include a rear-mounted single motor version with 180kw, as well as two dual-motor models with front + rear (250kw + 180kw) configurations. Therefore, all DM models are four-wheel drive, with two capable of full electric four-wheel drive, while DMI models are all two-wheel drive. 3. Pure electric range: DM offers 81 kilometers and 100 kilometers, while DMI provides 52 kilometers and 112 kilometers. On the surface, the differences seem minor, but in reality, their batteries are completely different. DM still uses ternary lithium batteries, whereas DMI employs BYD's latest lithium iron phosphate blade battery.
Was this review help?
9
1
Share
More Forum Discussions

How to Apply for a Road Transport Permit?

To apply for a road transport permit, you must first purchase a licensed commercial truck that has been legally approved by the road transport administrative authority. Then, with relevant documents such as the driver's vocational qualification certificate, vehicle license, and purchase tax certificate, you need to submit the required application materials to the road transport administrative authority for review and approval. Only after approval can you obtain the road transport permit issued by the authority. The specific procedures may vary slightly depending on the type of vehicle purchased and other special circumstances. Article 8 of the "Regulations on Road Transport of the People's Republic of China" states: To apply for passenger transport operations, the following conditions must be met: 1. Possession of vehicles suitable for the intended operations and that have passed inspection; 2. Drivers who meet the conditions specified in Article 9 of these Regulations; 3. A sound safety production management system. For applying for scheduled passenger transport operations, a clear route and station plan must also be provided.
9
1
Share

Are there any differences between the Jetour X70S and X70?

There are differences between the Jetour X70S and X70 in terms of both exterior and interior design. The main differences between the Jetour X70S and X70 are as follows: 1. Exterior: The X70 features a three-horizontal-slat grille design, while the X70S has a single horizontal slat with a dot-matrix pattern. The rear badges are also different, displaying "X70" and "X70S" respectively. 2. Interior: The X70 adopts a dark interior style, with a 10-inch LCD display on the center console flanked by air vents. The three-spoke "D-shaped" multifunction steering wheel integrates multiple buttons, and the instrument cluster is also equipped with an LCD display. The X70S features a horizontal center console design with a floating LCD display, and the physical buttons below the center console use a piano-key design.
9
2
Share

How to reset the maintenance light on Beijing BJ40?

The method to reset the maintenance light on Beijing BJ40 is as follows: Press the start button to turn on the power, press the accelerator pedal all the way down and hold for more than 5 seconds, then press the start button to turn off the power, release the accelerator pedal and wait for 2 minutes until a sound is heard, indicating the maintenance light has been reset. Here is some related information about the Beijing BJ40: 1. Body dimensions: The Beijing BJ40 has a body length, width, and height of 4350mm, 1843mm, and 1834mm respectively, with a wheelbase of 2450mm. 2. Design: In terms of appearance, this car adopts a more square-shaped design. The front grille features a five-hole design with chrome trim for decoration. The headlights use a new LED light cluster, and the taillights also employ an LED light cluster. The LED lens lights and intelligent fog lights with cornering assist lighting function not only enhance the visual effect of the front face but also improve driving safety.
2
0
Share

What Causes Engine Idle Vibration After Driving Through Water?

Air filter clogging, high-voltage wire short circuit, low idle speed, and abnormal water temperature can cause engine idle vibration after driving through water. Air filter clogging: The air filter is designed to protect the engine and reduce wear. It is generally replaced every 10,000 kilometers or so. If not replaced in time, insufficient air intake can lead to low idle speed, causing the engine to vibrate. High-voltage wire short circuit: A high-voltage wire short circuit refers to the core wire of the high-voltage wire being short-circuited, which can affect ignition and cause engine vibration. Low idle speed: The engine idle speed value is preset in the car's computer. When the RPM drops below a certain range, the car's computer will automatically adjust it. If the idle speed is too low and causes vibration, it indicates that it has exceeded the computer's control range. Abnormal water temperature: The engine operating temperature has a normal range. High water temperature can cause advanced ignition timing, changes in the air-fuel mixture, thinning of engine oil viscosity, and reduced lubrication performance. Common causes of vibration include insufficient coolant, a stuck thermostat, a non-functioning fan, or an inaccurate temperature control switch. Solutions for engine idle vibration after driving through water: Clogged air filters can be resolved by simply replacing the filter element. A high-voltage wire short circuit can be checked with a multimeter to measure resistance, and the wire with significantly higher resistance should be replaced. For low idle speed, some cars have an adjustment screw on the throttle body to regulate idle speed, while others do not. For the latter, inspect the idle speed valve, throttle body, air flow meter, vacuum sensor, and adjust the ignition timing (for cars with distributors) to increase idle speed. Abnormal water temperature can be resolved by troubleshooting the issue.
12
0
Share

What are the symptoms of a car misfiring?

When a car misfires, it typically manifests as: abnormal engine operation or insufficient power, uneven engine performance with rhythmic vibrations at high, medium, and low speeds, and black smoke accompanied by popping sounds from the muffler. Below is a detailed introduction to car misfiring: 1. No fuel. Remove the fuel injector, place an oil container underneath. Start the engine and observe the fuel injection quality. Normally, it should be intermittent with strong atomization. If there's no fuel, continuous fuel flow, or no atomization, check the fuel injector, connecting wires, and TCU. 2. No compression. Remove the spark plug and use a specialized engine cylinder pressure gauge to measure the pressure. Fully open the throttle and start the engine. Observe the highest reading on the gauge and compare it with adjacent cylinders; the difference should not be less than 5%. Areas to check include the cylinder head gasket, intake valve, exhaust valve, and piston rings. 3. No spark. Remove the spark plug, attach it to the high-voltage wire, start the engine, and observe the spark produced. A normal spark is white; if there's no spark or the spark is red, check the spark plug, high-voltage wire, and ignition coil.
8
0
Share

Which Cities Allow Motorcycles on Highways?

Currently, approximately one-fifth of China's provinces and municipalities, including Beijing, Liaoning, Hubei, Hainan, Guizhou, Xinjiang, and Yunnan, have opened their expressways to motorcycles. The provinces where motorcycles are permitted on highways in China include Fujian, Shaanxi, Tianjin, Shanghai, Chongqing, Tibet Autonomous Region, and Xinjiang Uygur Autonomous Region. Riders are advised to thoroughly research before attempting highway travel, as entering highways without confirmation can be dangerous. Only proceed after verifying access is permitted. Motorcycle Riding Precautions: Helmet: Always wear a helmet when riding a motorcycle. Due to the unique risks of motorcycle riding, wearing a properly fitted helmet is essential for preventing accidents and ensuring personal safety. Riders are encouraged to invest in high-quality helmets for optimal protection. Lights: Motorcycle lighting is critically important. Before riding, inspect all lights thoroughly and use them appropriately during travel to enhance visibility and safety. A comprehensive pre-ride light check is mandatory. Tires: Tires play a vital role in riding safety. Examine tire wear conditions before riding and regularly maintain proper tire pressure to ensure optimal tread surface integrity. If you notice a foreign object puncturing the tread during riding, do not remove it immediately as this may accelerate air leakage.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.