Does the BYD Qin Use Green or Blue License Plates?

2 Answers
StSilas
07/24/25 6:52am
BYD Qin uses green license plates. The BYD Qin Plus model is classified as a new energy vehicle, with energy types being plug-in hybrid and pure electric. Both types fall under the new energy category, so it is perfectly appropriate to display the green new energy-specific license plate. New energy vehicle-specific license plates: Green background with black characters and black borders. The new energy vehicle license plate features a gradient green design, while large new energy vehicle license plates use a yellow-green dual-color scheme (the regional code section is yellow, and the number section is green). New energy vehicles include four major types: Hybrid electric vehicles (HEV), battery electric vehicles (BEV, including solar-powered vehicles), fuel cell electric vehicles (FCEV), and other new energy vehicles (such as those using supercapacitors, flywheels, and other high-efficiency energy storage devices).
Was this review help?
15
5
Share
DelBradley
08/11/25 2:37am
My BYD Qin just got the green license plate right after I picked it up last year, and the 4S dealership specifically reminded me that all new energy vehicles are like this. The Qin series now is basically all hybrid or pure electric, like my Qin PLUS DM-i plug-in hybrid which can run 120 km on pure electricity, fully meeting the national green license plate standards. Last week I saw an older fuel-powered Qin with a blue plate, but now 4S dealerships don’t sell the fuel version anymore. The green plate’s exemption from traffic restrictions is really convenient, especially for my daily 60 km commute. On the airport expressway, new energy vehicles can even use the bus lane, and even parking fees come with discounts.
Was this review help?
12
3
Share
Expand All
More Forum Discussions

Why Do Front Tires Wear Out Faster Than Rear Tires?

Automobile front tires wear out faster than rear tires depending on the vehicle's drive system and factors causing tire wear. The following are the factors that cause front tires to wear out faster than rear tires: 1. Engine installation position (center of gravity): Front-wheel drive vehicles bear more pressure on the front, while rear-wheel drive and four-wheel drive vehicles have a relatively more centered weight distribution, reducing pressure on the front wheels. 2. During braking, the vehicle tilts forward, concentrating weight on the front end and accelerating front tire wear. 3. As steering wheels, front tires wear out faster than rear tires. 4. Improper front wheel alignment data can also accelerate front tire wear. The following are descriptions of three drive systems: 1. Front-wheel drive: Refers to the front wheels acting as the driving wheels to pull the vehicle. 2. Rear-wheel drive: Refers to the rear wheels acting as the driving wheels to push the vehicle. 3. Four-wheel drive: Primarily rear-wheel drive, which can switch to front-wheel drive or four-wheel drive via the transmission based on road conditions.
7
3
Share

Why does the scooter not respond when starting?

Here are the reasons why a scooter may not respond when starting: 1. Check if the fuel level is sufficient and if the carburetor is receiving fuel; 2. Inspect the electrical circuit by removing the high-voltage wire from the spark plug, detach the high-voltage cap, and start the vehicle with the cap about half a centimeter away from the cylinder body to see if there is electricity. If there is electricity, the spark plug may be damaged. Additional information: 1. A motorcycle is a two- or three-wheeled vehicle driven by a gasoline engine and steered by handlebars to control the front wheel. It is lightweight, flexible, fast, and widely used for patrol, passenger and cargo transportation, as well as a sports equipment. 2. Motorcycles are categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, touring bikes, etc.
15
1
Share

What to Do If It Rains Right After Applying a Car Cover?

Rain immediately after applying a car cover will not affect the car body. Here are the relevant details: 1. Precautions: Once the car cover is applied, water molecules cannot penetrate, so there will be no impact on the car body. It is important to note that you should not use a high-pressure car wash within one month of application, as the strong force may damage the cover's adhesion. 2. Advantages of Car Covers: They have excellent elasticity and superior tensile strength, allowing them to adhere to any curved surface. They resist yellowing for over 3 years and aging for more than 5 years. The cover blends seamlessly with the original car, preserving the paint's original color.
12
5
Share

What Causes Motorcycle Fuel Cutoff?

The reasons for motorcycle fuel cutoff are as follows: 1. Fuel supply system failure: When a motorcycle gradually decelerates and experiences fuel cutoff during operation, with the engine slowly stalling and noticeable power loss before shutdown, it is generally due to a fuel supply system malfunction. 2. Engine failure: If the engine produces loud noises during the fuel cutoff and stalling process, cannot restart after stalling, and the kickstarter lever shows minimal compression resistance, it indicates a blown cylinder head gasket or damaged crankshaft oil seal. 3. Incompatible ignition system: Some motorcycles feature dual or multiple cam lobes. Using a single-lobe ignition system may result in normal idle but inability to accelerate properly, essentially causing ignition failure.
8
0
Share

What Causes Engine Failure in a Car?

The reasons for engine failure in a car are as follows: 1. Sensor-related failures: such as the water temperature sensor, crankshaft sensor, oxygen sensor, etc.; 2. Poor combustion of the air-fuel mixture: issues with the engine's spark plugs, ignition coils, fuel pump, or clogged fuel lines can all lead to poor combustion of the engine's air-fuel mixture. 3. Air intake problems: The engine requires air intake during combustion, and in this process, the air filter is crucial. If the car's air filter is dirty and not cleaned regularly, it can affect the car's air intake. Over time, this can lead to blockages, and in severe cases, it can cause the engine warning light to illuminate. 4. Turbocharging issues: Problems with the intake boost pipes or turbocharger can also trigger the engine warning light. The most common issue is a damaged turbocharger, accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust pipe.
6
2
Share

What is the lifespan of built-in tire pressure monitoring sensors?

Generally, the lifespan of built-in tire pressure monitoring sensors is usually more than 5 years. The main factor determining the lifespan is the designed power consumption level. If the power consumption is low, the usage time will be longer. Tire pressure monitoring automatically monitors tire pressure in real-time during vehicle operation and alerts the driver in case of tire leaks or low pressure to ensure driving safety. There are three commonly used tire pressure monitoring methods: Direct tire pressure monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure tire pressure. The pressure information is transmitted from inside the tire to a central receiver module via wireless transmitters, and then the tire pressure data is displayed for each tire. The system automatically alerts when tire pressure is too low or when there is a leak. Indirect tire pressure monitoring: When the pressure in a tire decreases, the vehicle's weight causes that wheel's rolling radius to become smaller, making it rotate faster than other wheels. By comparing the rotational speed differences between tires, the system monitors tire pressure. Indirect tire alert systems essentially rely on calculating the tire's rolling radius to monitor pressure. Introduction to Tire Pressure Monitoring System (TPMS): It combines the advantages of both systems mentioned above. Direct sensors are installed in two diagonally opposite tires, along with a 4-wheel indirect system. Compared to using only direct systems, this hybrid system can reduce costs and overcome the indirect system's inability to detect simultaneous low pressure in multiple tires. However, it still cannot provide real-time data of actual pressure in all four tires like direct systems can.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.