Does the BYD Qin PLUS DM-i Not Have a Transmission?

1 Answers
LucasLynn
07/24/25 11:56pm
BYD Qin PLUS DM-i does have a transmission. Taking the Qin PLUS 2021 DM-i 55KM Premium model as an example, its body dimensions are 4765mm in length, 1837mm in width, and 1495mm in height, with a wheelbase of 2718mm. The body structure is a 4-door, 5-seater sedan. The Qin PLUS DM-i is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 110ps, a maximum power of 81kw, and a maximum torque of 135nm. It is paired with an electronic continuously variable transmission (CVT). The front suspension type is MacPherson independent suspension, and the rear suspension type is a torsion beam non-independent suspension.
Was this review help?
3
3
Share
More Forum Discussions

Which BMW model comes with the blade key?

BMW blade key refers to the BMW 530Li. Although the blade key is not as high-tech as the LCD key, its feel and design are irresistible, especially the M tricolor on the side. Here are some related details: 1. The new BMW 5 Series has a more youthful appearance and a more luxurious interior compared to its predecessor, with styling that rivals the BMW 7 Series. Its market reputation is subtly surpassing that of the Mercedes-Benz E-Class and Audi A6L. 2. Among its peers, the BMW 5 Series can definitely "rely on its looks." Features like the LED angel-eye headlights, the double-kidney grille, and especially the new dual-exhaust design at the rear further enhance its sporty appeal. 3. In terms of power, the new BMW 5 Series is equipped with a "B48" engine. This 2.0T high-power variant delivers 252 horsepower and a maximum torque of 350 Nm, paired with an 8AT transmission. With a maximum power output of 185 kW, it accelerates from 0 to 100 km/h in 6.9 seconds, matching the performance of the Mercedes-Benz E300.
9
4
Share

What is the difference between DM and DM-i?

1. DM-i has multiple advantages that lead other hybrid technologies, and its "core concept" is to prioritize electricity and use fuel as a supplement. In terms of architecture, the DM-i super hybrid is based on a high-capacity battery and high-power motor, relying on the high-power motor for driving during vehicle operation. 2. The core component of BYD's DM-i super hybrid technology is the newly developed Xiaoyun plug-in hybrid dedicated engine, which comes in two different versions—the 1.5L engine is mainly used in the Qin PLUS and Song PLUS, while the 1.5T turbocharged engine is used in the larger Tang DM-i model. 3. When the DM-i model has sufficient battery power, it operates like a pure electric vehicle, with the motor providing enough power for driving under various road conditions. When the battery is low, the DM-i model autonomously decides whether to use electricity, fuel, or a combination of both based on system conditions.
14
0
Share

Can a second-hand car purchased in another city be registered locally?

It is possible to register a second-hand car purchased in another city locally. According to relevant laws and regulations in China, a second-hand car bought in another city can be directly registered in the place where the vehicle is located, or it can be registered in the owner's local area. Additional information: 1. Required documents: The original owner of the second-hand car needs to provide documents such as the registration certificate, driving license, and ID card. The buyer needs to provide an ID card. 2. Procedures: After providing the necessary documents from both parties, go to the local vehicle management office where the car is originally registered to transfer the files. After completing all procedures, a temporary license plate will be printed, and the car can then be registered in the city where the owner resides. 3. Vehicle evaluation: The vehicle must undergo an evaluation. The evaluation fee is generally 1%-2% of the assessed vehicle value. Other fees include the cost of changing the license plate, driving license, registration certificate, and other related documents.
4
5
Share

What are the lighting operations in Subject 3?

Mainly low beam, high beam, and alternating between high and low beams. Subject 3 lighting mnemonic rhyme: Meeting and following cars with streetlights, straight intersections with good lighting. High beams are only used in two situations, when lighting is insufficient or required. Alternating beams seem frequent, but actually boil down to two scenarios. One is flashing for overtaking, the other is passing special sections. There are three additional special cases, all requiring hazard lights first. Fault parking uses position lights, foggy weather adds fog lights. Lighting simulation test precautions: Check first when entering - reset all lights, turn off what needs to be off. Follow instructions - don't rush commands, turn lights on only after instruction begins, turn off only after instruction ends. Pay attention to high beams - only two instructions require high beam use, when alternating between beams, always end on low beam.
11
1
Share

What is the Peugeot 1.6T Timing Installation Diagram Tutorial?

Before disassembly, use professional tools to secure the flywheel position and camshaft timing gear position. During installation, maintain the fixed positions for assembly. Additional Information: 1. The 1.6T engine in the 3008 was jointly developed by the French Peugeot Citroën Group and the German BMW Group. It is the first turbocharged and direct-injection engine used by Dongfeng Peugeot, delivering strong performance with 167 horsepower and a maximum torque of 245 N·m, incorporating numerous advanced technologies from BMW. This engine features a double overhead single VVT camshaft, chain-driven, and is equipped with a CVVT continuous variable valve timing system. 2. During installation, ensure the protection of the timing chain guide, as this plastic component often becomes brittle in harsh environments. Over time, the timing may become misaligned, requiring specialized tools designed for this engine to reset the timing by securing the flywheel and camshaft timing gear. During disassembly and reassembly, it is necessary to remove the front wheel and engine guard, as well as the valve cover. When reinstalling, it is recommended to replace the valve cover gasket as well.
8
1
Share

Can I Get My Car Inspected Without the Green Book?

You can get your car inspected without the green book. Here are the relevant details about vehicle inspection: 1. Explanation: Vehicle annual inspection does not require the vehicle registration certificate (commonly known as the big green book); the vehicle registration certificate is the legal proof of vehicle ownership, kept by the vehicle owner and not carried with the vehicle. 2. Inspection materials: (1) Original copy of the compulsory traffic accident liability insurance certificate (duplicate). (2) Original and duplicate copies of the vehicle registration certificate. (3) Private cars: Original ID card of the owner and photocopies of both sides; For companies: Copy of the company's organization code certificate with the company's official seal. (4) Proof of payment of vehicle and vessel usage tax (can be paid directly at the inspection location; after 2012, vehicle and vessel usage tax is paid together with insurance, so now you only need to bring the insurance policy). (5) Green environmental protection label. (6) Reflective warning triangle. Please resolve all traffic violation records before the inspection.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.