···
Log in / Register

Does the BYD F3 have a rearview camera?

4 Answers
StephanieAnn
07/29/25 12:24pm

BYD F3 has a rearview camera, specifically in the Noble Edition and Flagship Edition. The BYD F3 is an A-class passenger car produced by BYD Auto, with body dimensions of 4605mm in length, 1705mm in width, and 1490mm in height, and a wheelbase of 2600mm. In terms of power, the BYD F3 is equipped with a self-developed 1.5L all-aluminum engine, which is considered the golden displacement, delivering a maximum power of 80kW and a maximum torque of 145Nm. This engine features advanced VVL (Variable Valve Lift) technology and an EGR (Exhaust Gas Recirculation) system. For the exterior, the BYD F3 adopts a new double-layer chrome front grille, with more aggressive front and rear light clusters, paired with dual-tone aluminum alloy wheels to enhance its sporty appeal.

Was this review help?
13
5
Share
LeKennedy
08/13/25 11:27pm

I've been driving a BYD F3 for a while now, it's a 2015 model that didn't come with a reverse camera in its original configuration—back then, basic functionality was enough. However, I found not having a reverse camera really inconvenient, especially at night or after rain when the rearview mirror visibility was poor. Later, I went to a repair shop and had one installed for about 500 yuan. It was a simple setup with wiring, a camera, and a display screen. Now, reversing is much easier, and the screen shows objects behind me with super clarity. If you're considering buying a new or used car, I suggest checking the configuration list first—higher trim levels might include this feature. Alternatively, DIY installation like mine is a cost-effective and practical option. It's common for economy cars not to come standard with a reverse camera, but adding one improves safety and convenience, which I think is totally worth it.

Was this review help?
9
5
Share
Expand All
LaJeremiah
10/09/25 3:34am

As a car enthusiast, I've found that the reverse camera configuration of the BYD F3 depends on the specific year and model. Early versions like the 2010 model usually didn't include it as standard equipment, since it was positioned as an economical entry-level car focusing on low-cost functionality. However, with technological advancements, some higher-end or special editions after 2017 began incorporating reverse camera and display systems. If you're considering a newer model, you can check the vehicle manual or consult the dealer for confirmation. Overall, BYD has made improvements in intelligent assistance features, but still prioritizes practicality. I've personally researched aftermarket installation options, and there are many accessories available in the market, with prices ranging from 300 to 800 RMB. The post-installation experience can be just as good as the factory-installed version. Such minor upgrades can make driving safer and more intelligent.

Was this review help?
13
0
Share
Expand All
VonGraham
11/22/25 4:49am

From a safe driving perspective, I noticed that the original BYD F3 models often don't come with a rearview camera, especially the older versions. This increases the risk of reversing into people or objects, particularly on unfamiliar narrow roads. I recommend prioritizing the installation of a camera system even if it's not standard equipment - the cost is low but it can prevent accidents. For cars like the BYD F3, adding a rearview camera is one of the most popular aftermarket modifications, and friends who've done it all say it's very convenient. Just choose a good position to fix the camera and pair it with a screen - the operation is simple. Driving safety comes first, and this small investment is worthwhile.

Was this review help?
10
1
Share
Expand All
More Forum Discussions

How to Solve Fogging on the Front Windshield?

Solutions for fogging on the front windshield: 1. Cold air defogging: The principle is similar to convection defogging, keeping the inside and outside temperatures the same so that fog does not adhere to the glass; 2. Hot air defogging: Uses the principle of evaporating fog with hot air, which takes less time than cold air defogging; 3. Physical defogging: Use the wiper to clear fog on the outside of the front windshield, and roll the window up and down to clear fog on the side glass. The defogging function has two buttons, for the front and rear respectively. The front windshield defogging icon is fan-shaped, while the rear windshield defogging icon is rectangular. Power windows refer to windows that can be automatically raised or lowered using power. The driver or passenger operates a switch to connect the window lift motor circuit, which generates power to drive a series of mechanical transmissions, allowing the window glass to be raised or lowered as needed.
7
2
Share

What are the functions of a dash cam?

Automobile driving recorders have functions such as identity recognition, recording vehicle driving time, speed, mileage, overtime driving (fatigue driving) alarm and recording. They also include management software, providing a good human-machine interface to achieve vehicle information input, modification, query statistics, and report printing functions. When using a dash cam, secure the recorder to the car's rearview mirror with a clip, place a power supply device in the glove box, and connect it to the central control cigarette lighter. At this point, the dash cam, portable navigation, and radar detector can all be powered by the power supply device. Finally, tuck any excess wiring behind the glove box. Generally, dash cams do not have built-in memory and rely on memory card expansion or mobile digital hard drives. For SD card expansion, capacities vary from 2G, 4G, 8G, 16G, to 32G. For mobile digital hard drives, capacities can be 250G, 500G, 1000G, etc., meeting users' greater video storage needs.
3
2
Share

How many kilometers can a new car run on the highway?

For a brand-new car just off the lot, it's best not to drive on the highway during the break-in period. In principle, within the first 2,500 kilometers, the engine speed should not exceed 2,500 rpm. Most new cars during the break-in period are advised not to exceed 100 km/h in speed, keep the engine speed below 3,000 rpm, and avoid aggressive driving, sudden acceleration, or hard braking. Maintain a steady speed: The key during the break-in period is to drive at a steady speed, avoiding rapid acceleration or braking, and high-speed rotations. Once the break-in period is over, it's necessary to take the car for a highway run. Watch for component damage: Pay attention to any unusual noises, as they may indicate installation or configuration issues with certain components. Remember to address these issues for free during the first maintenance service, as some parts may not be covered for free repairs if damaged after this period.
12
1
Share

Does Car Wheel Hub Modification Affect Vehicle Inspection?

If not approved by the traffic management department, the modified car wheel hubs will fail the annual inspection. The law prohibits arbitrary changes to tire sizes, as it may affect the vehicle's performance and comfort, and in severe cases, jeopardize driving safety and lead to traffic accidents. Additional information is as follows: 1. Regulations: According to the relevant provisions of the current "Motor Vehicle Registration Regulations," any changes to the body color, model, performance, purpose, or structure of a licensed motor vehicle, including replacement of the frame, body, or engine, require the owner to apply for modification registration with the vehicle management office. Installing spoilers, extensive body kits, or modifying exhaust pipes are generally not allowed. 2. Vehicle Inspection: Vehicle inspection refers to the mandatory annual check-up required for all vehicles with official license plates and registration certificates, equivalent to an annual physical examination for the vehicle according to the "Safety Technical Conditions for Motor Vehicle Operation." Vehicle inspections help promptly eliminate potential safety hazards, encourage better vehicle maintenance, and reduce the occurrence of traffic accidents.
16
5
Share

What is the correct sequence for engaging P gear and applying the handbrake?

For automatic transmission vehicles, you should first engage the P gear and then apply the handbrake when parking. Alternatively, you can apply the handbrake first and then engage the P gear, but in this case, you must not release the foot brake until the P gear is engaged. Precautions for applying the handbrake: Do not pull the handbrake too tightly, as overstretching the metal cable or keeping it stretched for a long time can accelerate deformation and aging, leading to a loosened handbrake or cable breakage. Avoid applying the handbrake after driving on snowy or icy roads in winter, as accumulated snow may freeze the handbrake, making the vehicle unable to move. Additionally, when washing the car in winter, avoid using the handbrake; instead, use a gear or bricks to secure the vehicle. Do not park on a slope with the handbrake engaged for extended periods. Precautions for gear shifting: Do not look down at the gear lever when shifting gears. Coordinate the clutch properly when shifting gears. Control the speed before shifting gears. Avoid skipping gears when shifting.
15
1
Share

How to Distinguish Good and Bad Car Paint Jobs?

Methods to distinguish good and bad car paint jobs are as follows: 1. Check the drying quality of the paint film: Press the painted surface firmly with your finger to see if there are obvious fingerprints. If fingerprints appear, it indicates poor drying of the paint film. The car needs to be re-baked in a paint booth. 2. Check if the color of the paint matches the original paint: Under good lighting conditions, carefully observe the repainted area and the adjacent body of the car for 7-10 seconds. Cross-check by looking directly at it and then at an angle (30-45 degrees) to see if there is any noticeable color difference. Note that dark-colored cars should be compared against the light, while light-colored cars should be compared with the light behind them. 3. Check the fullness of the paint film and the uniformity of the paint texture: Look directly at the fullness of the paint film. If the paint film is too thick, it will appear cloudy and dull; if it is too thin, the surface will lack brightness and appear dark. A well-full paint film will have a glossy, oily appearance.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.