Does the Buick Verano have an anti-collision beam?

1 Answers
Guy
07/30/25 10:16am
Buick Verano is equipped with an aluminum anti-collision beam. Here is more information about the anti-collision beam: 1. The anti-collision beam is a device designed to absorb collision energy and reduce damage during vehicle impacts. It consists of a main beam, an energy absorption box, and mounting plates that connect to the vehicle. Both the main beam and the energy absorption box can effectively absorb collision energy during low-speed impacts, minimizing the force transmitted to the vehicle's longitudinal beams, thereby protecting the vehicle. 2. The anti-collision beam is bolted to the vehicle body, making it easy to remove and replace. Many modern vehicles also include a foam buffer layer on the anti-collision beam, which primarily supports the external plastic bumper during collisions at speeds below 4 km/h, helping to mitigate collision forces, reduce damage to the plastic bumper, and lower repair costs.
Was this review help?
13
4
Share
More Forum Discussions

Is it illegal to raise the car chassis by 4cm?

Minor modifications are acceptable as long as they don't violate regulations. More extended information is as follows:1. Introduction: The structure of a car chassis consists of four parts: the transmission system, the running system, the steering system, and the braking system. Most modern cars use an independent suspension system, which can be further divided into different structural forms such as the swing-arm type, trailing-arm type, multi-link type, candle type, and MacPherson suspension system. 2. Automobile Construction: Engine: The engine consists of 2 major mechanisms and 5 major systems, including the crank connecting rod mechanism, valve mechanism, fuel supply system, cooling system, lubrication system, ignition system, and starting system. Chassis: The chassis supports and installs the car engine and its various components and assemblies, forming the overall shape of the car. It receives the power from the engine to make the car move and ensures normal driving. Body: The body is installed on the frame of the chassis and is used for the driver and passengers to ride or load goods. The body of a car or passenger car is generally an integrated structure, while the body of a truck is generally composed of two parts: the cab and the cargo box. Electrical equipment: The electrical equipment consists of two major parts: the power supply and the electrical equipment. The power supply includes the battery and generator; the electrical equipment includes the engine starting system, the ignition system of the gasoline engine, and other electrical devices.
11
4
Share

Do 4S shops take a break at noon during maintenance?

4S shops do take a break at noon during maintenance. Here is a detailed introduction to automotive 4S shops: 1. Sales and after-sales service: 4S shops can be divided into sales and after-sales service. Sales include new car sales, used car sales, large customer sales, beauty and installation sales, etc. After-sales service includes routine maintenance, insurance accident claims, manufacturer warranty claims, car insurance sales, etc. 2. Brand dealers: As automotive brand dealers, 4S shops must follow the requirements of the original equipment manufacturer (OEM) in terms of unified store design, standardized management, service standards, automotive brand culture, and market activity themes. Automotive brand manufacturers also assess the operating conditions of 4S shops, as they represent the brand's culture and value and serve as the direct channel for users to interact with the automotive brand.
4
5
Share

Reasons for BMW 3 Series Remote Control Failure?

There are many reasons for remote key failure. One scenario is a dead battery or poor battery contact; The second scenario is the failure of the timing control module in the remote key, which can also render the remote inoperative; The third scenario involves factors like aging of the car's remote transmitter antenna, which can also cause such issues. If you encounter this situation, you can visit a repair shop for inspection and repair. Below is some extended knowledge about remote keys: 1. Working Principle: Simply put, the working principle is as follows: First, the key emits a weak radio wave, which is received by the car's antenna. The electronic control unit (ECU, Electronic-Control-Unit) then identifies the signal code, and the system's actuator (motor or electromagnetic coil) executes the lock/unlock action. 2. Working Modes: According to their usage methods, they can be divided into three categories: active working mode, passive working mode, and coil induction mode.
1
4
Share

What Causes Jerking Sensation at Low Speeds in a Car?

Excessive carbon buildup in the throttle body, fuel injectors, and intake manifold. Detailed explanations for the jerking sensation at low speeds are as follows: 1. Excessive carbon buildup in the throttle body, fuel injectors, and intake manifold: Many malfunctions are caused by carbon buildup, and some vehicles may experience jerking sensations due to it. Regular carbon cleaning is recommended. 2. Substandard fuel quality: Poor fuel quality leads to incomplete combustion. 3. Faulty spark plugs or ignition coils: This can cause cylinder misfires. Such issues require inspection and repair at a service center to avoid further safety hazards.
7
2
Share

What does REM mean in car subwoofers?

To be precise, it should be called the controller interface, which is the interface that controls the turning on and off of the subwoofer. More details about the REM in car subwoofers are as follows: 1. Introduction: REM is the interface that controls the turning on and off of the subwoofer; generally, the REM should be connected to the AMP or REM output of the player's main unit, which controls its turning on and off. If the main unit does not have this, it should be connected to the ACC. 2. Disadvantages: Although shorting it to a 12-volt interface can forcibly turn on the subwoofer, if it is a subwoofer for small cars, this connection method will continuously consume the battery's power. Over time, it may burn out the audio system and could also prevent the car from starting, so it is best to connect it to the main unit controller.
1
5
Share

Where is the air intake located on the Boyue?

The air intake of the Boyue is located on the car's radiator beam. Below is some relevant information about the Boyue: 1. Overview: The Geely Boyue integrates Chinese cultural elements with international fashion trends in its exterior design. It also excels in intelligence, leading the new SUV trend with its smart safety, driving, comfort, and connectivity features. 2. Powertrain: The Geely Boyue offers a variety of powertrain options, including a 1.8TD engine, a 2.0L naturally aspirated engine paired with a 6-speed manual transmission, and an Australian DSI 6-speed automatic transmission, allowing for multiple powertrain combinations. The 1.8TD engine in the Boyue is an upgraded high-power version based on the Borui's 1.8TD "China's Top 10 Engines of 2015," delivering a maximum power of 135kw/5500rpm and a maximum torque of 285N-m/1500-4000rpm, providing strong and excellent performance.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.