Does the Buick Excelle have anti-collision beams?

Why are car steering wheels on the right side in Hong Kong?

There are currently two traffic systems in the world: one is left-hand traffic, and the other is right-hand traffic. Mainland China has always adopted left-hand traffic, with car steering wheels on the left side. Hong Kong and Macau were both former Western colonies and continue to maintain right-hand traffic after their return, with car steering wheels on the right side. Relevant information about car steering wheels is as follows: Function: Its function is to convert the force applied by the driver to the edge of the steering wheel into torque and then transmit it to the steering shaft. Correct grip: If the steering wheel is viewed as a clock face, the correct hand position is to place the left hand between the 9 and 10 o'clock positions and the right hand between the 3 and 4 o'clock positions. In the event of a collision, this posture is more conducive to supporting the body.

19

5

Share

How Many Years of Experience Do Beginners Need to Drive on Highways?

According to legal regulations, novice drivers can only drive on highways after holding a driver's license for one year. If the driver's license has been held for less than one year, the driver must be accompanied by someone who has held a driver's license for more than three years to drive on highways. During the probationary period, probationary drivers must display a probationary sign on their vehicles. Otherwise, they will be penalized. Drivers in the probationary period are not allowed to drive buses, commercial passenger vehicles, police cars, fire trucks, or other similar vehicles. According to Article 75 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": When driving a motor vehicle on a highway during the probationary period, the driver must be accompanied by someone who has held a corresponding or higher-level driver's license for more than three years. Legal Basis: Article 75 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": During the probationary period, motor vehicle drivers are not allowed to drive passenger cars, commercial passenger vehicles, police cars, fire trucks, ambulances, engineering rescue vehicles, or motor vehicles carrying explosives, flammable and explosive chemicals, toxic or radioactive substances; they are also not allowed to tow trailers. When driving a motor vehicle on a highway during the probationary period, the driver must be accompanied by someone who has held a corresponding or higher-level driver's license for more than three years. For drivers of small automatic passenger vehicles for the disabled, they can be accompanied by someone who holds a driver's license for small automatic passenger vehicles or higher.

6

5

Share

What to Do with China V After China VI Implementation?

If your vehicle is China V or China IV, the implementation of China VI will not affect its normal operation on the road, as vehicles purchased are subject to the emission standards at the time of purchase. As long as the vehicle meets the standards, it can continue to be driven. However, after the implementation of China VI, the resale value of China V new vehicles will decrease compared to before, increasing the cost of changing cars. The differences between China V and China VI are: Different carbon monoxide emission requirements: China V vehicles have a carbon monoxide content of 1000mg per kilometer; China VI vehicles have a carbon monoxide content of 500mg per kilometer. Different letter representations: China V is represented by V; China VI is represented by VI. 3. Different issuing departments: The China V standard was issued by the Ministry of Environmental Protection; the China VI standard was issued by the Ministry of Environmental Protection and the General Administration of Quality Supervision, Inspection and Quarantine.

5

2

Share

When Can a New Car Be Driven on the Highway?

It is best to drive a new car on the highway after the break-in period. During the break-in period, the engine speed should be controlled at around 2,500 RPM, and the car should not remain in a single gear for too long. The speed and gear should be changed every few minutes to ensure that the gears are properly broken in and to prevent excessive wear on any single gear. Here are some methods to determine whether a car is new: Check the manufacturing date: The manufacturing date on the vehicle should match the date on the certificate of conformity, and it is usually difficult to alter. If the manufacturing date exceeds 15 days, the car is considered used. Inspect the brake discs: After driving more than 200 kilometers, brake pads typically leave noticeable marks on the brake discs. There is usually a gap of 1–2 millimeters between the brake pads and the outer edge of the brake discs.

11

4

Share

Will Running a Yellow Light Trigger a Camera?

Traffic cameras will photograph vehicles entering an intersection during a yellow light. According to the Road Traffic Safety Law, a yellow light serves as a warning, and motor vehicles should slow down when approaching an intersection. If your vehicle has already crossed the stop line when the yellow light activates, you may proceed through the intersection. If your vehicle has not yet crossed the stop line, you should slow down and come to a stop. Running a yellow light constitutes a violation of traffic signal regulations, punishable by a fine ranging from 20 to 200 yuan and 6 penalty points. (1) When the green light is on, vehicles and pedestrians are permitted to proceed, except that turning vehicles must not hinder the passage of straight-moving vehicles or pedestrians with the right of way; (2) When the yellow light is on, vehicles and pedestrians are prohibited from proceeding, except for vehicles that have already crossed the stop line and pedestrians already within the crosswalk, who may continue; (3) When the red light is on, vehicles and pedestrians are prohibited from proceeding.

15

1

Share

What is the difference between a comprehensive car dealership and a 4S store?

Comprehensive car dealerships and 4S stores differ in the following ways: 1. Different vehicle sources: The cars in comprehensive dealerships are purchased in bulk from 4S stores; 4S stores are a car franchise model centered around the 'four-in-one' concept, with vehicles provided directly by the manufacturer. 2. Different business scopes: Comprehensive dealerships only sell cars; 4S stores include sales, spare parts, after-sales service, and information feedback. The front bumper replaced at a 4S store is an original part. A car bumper is a safety device designed to absorb and mitigate external impacts, protecting the front and rear of the vehicle. The bumper consists of an outer panel, cushioning material, and a crossbeam. The outer panel and cushioning material are made of plastic, while the crossbeam is formed from cold-rolled sheet metal pressed into a U-shaped channel. The outer panel and cushioning material are attached to the crossbeam, which is then connected to the frame longitudinal beams with screws.

2

Share

Does the Buick Excelle have anti-collision beams?

Why are car steering wheels on the right side in Hong Kong?

How Many Years of Experience Do Beginners Need to Drive on Highways?

What to Do with China V After China VI Implementation?

When Can a New Car Be Driven on the Highway?

Will Running a Yellow Light Trigger a Camera?

What is the difference between a comprehensive car dealership and a 4S store?

What to Do If an Accident Occurs While Driving Someone Else's Car?

Why Can't I Schedule the Subject 4 Test?

Can the ETC debit card be removed when not in use?

Can I undergo my driver's license annual review in another province?