···
Log in / Register

Does the Buick Excelle have a one-key start function?

5 Answers
Casey
07/29/25 9:18am

The Buick Excelle is equipped with a one-key start function, which utilizes radio frequency identification technology. When the owner enters the vehicle, the onboard detection system immediately recognizes the smart card in the key. After confirmation, the vehicle's computer enters the operational state. At this point, the owner only needs to gently press the start button inside the car to start the vehicle normally. The Buick Excelle has a body length of 4609mm, width of 1798mm, height of 1486mm, and a wheelbase of 2640mm. In terms of power, the vehicle is equipped with two drive combinations: a 1.3T dual-injection turbocharged engine paired with a 6-speed DSS intelligent dual-clutch transmission, and a 1.0T dual-injection turbocharged engine paired with a 6-speed DCG intelligent dual-clutch transmission.

Was this review help?
1
2
Share
StellaRose
08/12/25 9:19am

I've been driving the Buick Excelle GT version for a year now, and I must say its one-push start feature is really convenient. Just approach the car with the key, press a button to start the engine without inserting any key into the ignition, saving a lot of time. This feature is common in models after 2019, especially in higher-end Elite or Flagship trims, probably because Buick wanted to enhance the driving experience. In practical use, combined with keyless entry, you can just toss the key in your bag when going out - perfect for busy office workers. But do note that it may malfunction when the key battery is running low, so regular checks are recommended. Before buying, it's advisable to check official specifications or test drive to confirm, as base models might not have it. Overall, this feature makes driving more hassle-free and adds a touch of tech-savvy appeal.

Was this review help?
9
1
Share
Expand All
DelMadison
10/06/25 4:57am

If you're planning to buy a Buick Excelle, I can tell you whether it has a push-button start depending on the specific configuration. From what I know, the GT and Premium trims since 2020 come with this feature. It's very simple to use: just keep the key in your pocket and press the button near the instrument panel to start the engine—no need to fiddle with the keyhole. This design offers many benefits, like enhanced security and convenience, similar to premium car brands. However, lower-end models like the Comfort trim don't include this feature and require using a traditional key. I recommend visiting several dealerships to compare specs or checking online car reviews before making a purchase. Also, be careful not to get the key wet, as it may affect the signal. Modern cars are trending toward smarter and more user-friendly features, and the Excelle isn't lagging in this regard.

Was this review help?
20
1
Share
Expand All
DelTalia
11/19/25 6:25am

The Buick Excelle indeed features a one-button start, particularly common in higher trim models, which simplifies the ignition process. With the key on you, just press the button to start the car—convenient and quick. This feature, paired with wireless charging or automatic air conditioning, gives a notably advanced driving experience. Compared to the old-fashioned key insertion, it eliminates the hassle of finding the ignition slot, proving especially useful in rainy weather or urgent situations. Base models might not include it, but most upgraded versions post-2018 have incorporated this. Users are advised to replace the key battery periodically to avoid unexpected malfunctions. Highly practical, it significantly enhances daily driving comfort.

Was this review help?
17
4
Share
Expand All
OJoanna
01/09/26 8:01am

Based on my car ownership experience, whether the Buick Excelle has a one-button start depends on the trim level. The Elite and Premium trims definitely have it, with the button located near the steering wheel for straightforward operation. The base Comfort trim usually omits this feature, sticking with traditional ignition. The most reliable way to confirm is to check the manual or ask the dealer when purchasing. This feature is part of the keyless entry system—just keep the key in your bag, enabling quick starts and enhanced anti-theft protection. An added benefit is reduced key wear, extending its lifespan. Don’t consider it premium; many cars now include it as standard, and the Excelle remains budget-friendly. Test it by pressing the button during a test drive—it’s simple.

Was this review help?
19
5
Share
Expand All
More Forum Discussions

What Causes Many Small Pieces to Fall Off the Tire Tread?

Tire tread shedding many small pieces is caused by driving long distances with insufficient tire pressure. Below is additional information: 1. Function of tire tread: The tread prevents mechanical damage to the tire body, transmits vehicle traction and braking force, and cushions impacts endured during driving. It requires good wear resistance, puncture resistance, elasticity, and road grip performance. 2. Additional information: Tires are circular elastic rubber products mounted on various vehicles or machinery for ground rolling. In 1845, R.W. Thomson, a civil engineer born in Scotland, invented the pneumatic tire and obtained a patent from the British government for "Improvements in the Wheels of Carriages and Other Vehicles." On December 10 of the same year, the first pneumatic tire was born.
13
0
Share

What is the engine displacement of the Lamando 230?

The Lamando 230 is equipped with a 1.8T engine. Here are the detailed specifications: 1. Interior: The steering wheel features a new three-spoke multifunctional design, and the instrument cluster adopts a dual-dial layout with a 3.5-inch color screen in the center. The dashboard layout is very neat, with a 6.5-inch LCD display in the center, the air conditioning control area at the bottom, and two polygonal-style air vents above. 2. Powertrain: It is powered by a 1.8TSI engine paired with a 6-speed DSG transmission, delivering a maximum power of 220 horsepower. The 0-100km/h acceleration time is approximately 6.5 seconds.
4
1
Share

What Does Full Car Waxing Mean?

Definition of full car waxing: Applying white wax or polishing wax to the ceramic surface to enhance the glaze's smoothness, achieving an antique effect. Below is relevant information about waxing: 1. Functions of waxing: Waterproofing, anti-static, high-temperature resistance, UV protection, and polishing effects. 2. Precautions for waxing: Waxing for new cars. The paint surface of a new car is in good condition, and waxing can effectively protect the paint from oxidation caused by UV rays and maintain the paint's gloss. It's important to control the waxing frequency. Depending on the driving environment and parking conditions, the interval between waxing should vary. Generally, for cars parked in garages and mostly driven on good roads, wax every 2 months or so. For cars parked outdoors exposed to wind and rain, the interval can be slightly shortened. Of course, this is not a strict rule and can be adjusted based on the actual condition of the car body.
13
3
Share

How to Register an Out-of-Town Used Car in Your Local Area?

When purchasing a used car from another city, it is usually necessary for the seller to transfer the vehicle records. During this process, the new owner's identification documents for future registration must be provided. After returning to the local area, the owner should submit the records to the local vehicle management office for review. Once the review is passed, the car can be registered and licensed. Relevant information about vehicle registration is as follows: 1. Required documents for registration: ID card, vehicle certificate of conformity, vehicle parameter sheet, vehicle invoice, vehicle purchase tax, car insurance policy, purchase invoice, vehicle qualification certificate, and temporary residence permit for non-locals. 2. Registration timeline: After purchasing the car, registration should generally be completed within 15-30 days based on the validity period of the temporary license plate. It is best to register within the validity period of the temporary license plate.
10
4
Share

What are the standard speeds for each gear of a motorcycle?

The standard speeds for each gear of a motorcycle are as follows: 1st gear for climbing hills is between 10 to 20 km/h, 2nd gear between 20 to 30 km/h, 3rd gear between 30 to 50 km/h, 4th gear between 50 to 60 km/h, and 5th gear between 60 to over 100 km/h. The most fuel-efficient speed range is between 30 to 50 km/h. The fuel consumption curve of an engine at different RPMs resembles a fishhook shape, with higher fuel consumption at low and high RPMs and lower fuel consumption at medium RPMs. This speed range is considered the economical speed. Practice has also shown that motorcycles are most fuel-efficient when traveling at a steady speed. Motorcycle riding precautions: Wear full riding gear, including a helmet and protective equipment. According to the new motor vehicle driver's license application and management regulations, riding a motorcycle without a helmet will result in a 2-point deduction. Follow highway traffic laws, do not speed, and avoid changing lanes arbitrarily. Motorcycles inherently have weaker braking capabilities compared to cars, so it is especially important to maintain a safe distance from the vehicle in front when riding on highways. Before entering the highway, check the vehicle's condition to ensure the braking system is functioning properly, tire pressure is normal, and the tires still have sufficient grip. Ensure the motorcycle meets the safety requirements for highway riding. A motorcycle safe for highway use should be able to cruise steadily at least at 100 km/h and still have the ability to overtake easily at that speed.
10
3
Share

How much is the fine and penalty points for removing the rear seats of a van?

Generally, there is no fine. For this behavior, once discovered, the traffic police department can impound the vehicle's license plate and registration certificate, order the owner to restore the original condition, impose a fine, and deduct three points. Here is additional information: 1. Regulations: According to the "Motor Vehicle Registration Measures" and the "Motor Vehicle Registration Work Standards," the vehicle management department determines the passenger capacity based on the number of seats when the vehicle leaves the factory, and the determined passenger capacity is not allowed to be changed. Removing seats will inevitably alter the "determined passenger capacity," which is considered a violation. 2. Precautions: Removing seats and carrying a large amount of cargo will change the ratio of the steering axle (wheel) load mass to the vehicle's curb weight and allowable load mass, thereby affecting the performance of the vehicle's steering system, posing safety hazards during driving, and potentially leading directly to traffic accidents.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.