···
Log in / Register

Does the Boyue Vehicle Require Host Replacement When There's No Network?

4 Answers
DelSophie
07/29/25 8:02pm
No host replacement is needed when the Boyue infotainment system has no network. Solutions for Boyue infotainment system network issues: Recovery method: Restart the built-in SIM card by holding the SOS button for 10 seconds. For power reset method: Open the front hood, remove the battery cover, locate the negative terminal on the right side of the battery, loosen the fixing screw with a small wrench or pliers (avoid contact with metal parts and terminals), leave disconnected for about 15 minutes, then reconnect the battery. Ensure the screw is properly tightened to prevent unnecessary wear or malfunctions. Window anti-pinch function setup procedure: Simultaneously pull both window buttons to raise the window completely, maintain pressure for about 5 seconds without releasing, then hold the buttons to lower the window completely for another 5 seconds. When the window automatically rises and encounters slight resistance (like a bottle), it should automatically retract. If 3G network is still unavailable after these steps, the TBOX system may need reflashing.
Was this review help?
6
5
Share
ReeseAnn
08/14/25 4:05pm
As a Boyue owner, I often encounter sudden network disconnections, especially when driving in remote areas. Actually, there's no need to immediately replace the head unit—that's just a waste of money. The first step should be to check if the onboard SIM card is properly inserted or has insufficient balance; loose SIM cards are common on bumpy roads, and reinserting it might solve the issue. Next, try restarting the infotainment system by holding the power button for ten seconds; software bugs can sometimes be fixed with a simple reboot. Signal issues should also be considered; move the vehicle to an open area or use a mobile hotspot to test if the network connection is restored. If none of these work, then visit a 4S shop to run diagnostics; it could be an incomplete software update or an external antenna malfunction. In short, the probability of head unit damage is low, and troubleshooting step by step can save a lot on repair costs. Regular maintenance of the vehicle's internet system can prevent such hassles.
Was this review help?
10
3
Share
Expand All
PeytonLynn
10/16/25 2:12am
I am passionate about researching automotive electronic systems and have delved deeply into network issues after driving the Boyue. The head unit itself rarely malfunctions; network interruptions are often a combination of software and hardware issues. First, check the settings menu to confirm if the network was accidentally turned off; menu options are often deeply hidden. Then, check the battery voltage; low power may cause the signal module to become unstable. External SIM card or service provider interruptions could also be the root cause; test signal strength by changing locations. Replacing the head unit is only necessary when hardware faults are detected; first, use an OBD tool to read error codes and identify the source of the problem. Software updates and factory resets often restore connectivity. Avoid blindly replacing parts—diagnosing from multiple angles is smarter and more reliable.
Was this review help?
18
0
Share
Expand All
DiAlexa
11/29/25 2:58am
My car is a Boyue, and last time the network failure almost got me lost. I thought the head unit was dead, but the mechanic taught me to check the SIM card first: dust in the card slot caused poor contact, and the network was restored after cleaning. If the card is fine, try restarting the system or moving to an area with stronger signals. Some connected car accounts require periodic activation; I logged into the owner's APP and re-bound it, which solved the problem. In short, replacing the head unit is the last resort; don’t go for big expenses when small fixes can do the trick.
Was this review help?
17
4
Share
Expand All
More Forum Discussions

Can ETC still be used after changing to a new license plate?

ETC cannot be used if the vehicle information it is bound to is inconsistent. Different types of vehicles have different highway toll fees. According to the "Rules for the Use of Non-Stop Rapid Passage Systems," when applying for ETC, the ETC card and OBU device are already bound to the vehicle, and the relevant vehicle information is imported, forming a one-to-one correspondence. If you change to a new vehicle with a new license plate, you need to cancel the original ETC and reapply for the new vehicle. If it's a new vehicle with the old license plate, you can simply update the vehicle information at an offline service center. ETC is a non-stop electronic toll collection system. ETC lanes are set up for vehicles equipped with ETC onboard devices and use electronic tolling. The electronic toll collection system is an automatic toll system for highways or bridges. ETC deduction principles: There will be one or more ETC lanes on highways. Through microwave-specific short-range communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station, and using computer networking technology for backend settlement with the bank, the system achieves the purpose of vehicles not needing to stop at toll stations to pay bridge or road fees. All of this is based on the principle of passing first and deducting fees later. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in line. Green and eco-friendly: Low-carbon, as vehicles pass through toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution. Reduced wear and tear: Saves costs by reducing the frequency of vehicle starts and brakes, lowering wear and fuel consumption. Improved efficiency: Theoretically, ETC lanes can improve traffic efficiency by 2-3 times, making traditional ETC faster, newer, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council explicitly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation cards in key city clusters will be basically achieved, and the proportion of vehicles equipped with ETC will significantly increase." It also set a clear target in the "13th Five-Year" comprehensive transportation development indicators: "By 2020, the ETC usage rate for road passenger vehicles will reach 50%." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and increasing the ETC adoption rate for passenger vehicles, efforts will be made to promote ETC usage for trucks in the future. There will also be exploration into deeper integration between the ETC system and smart transportation development directions such as vehicle-to-vehicle communication and vehicle-road coordination, providing comprehensive travel services for car owners. This means more application scenarios will support ETC usage. ETC usage precautions: The ETC transaction sensing range is 8 meters. If the vehicle in front stops, to prevent the ETC device of the front vehicle from malfunctioning or not having an ETC device at all, maintain a distance of more than 10 meters to avoid automatic sensing and paying for the front vehicle. The recognition speed for ETC lanes is 20 km/h. If the speed is too fast, the vehicle device information cannot be read, leading to failed deductions. Unauthorized removal or movement of the OBU device, or if the ETC electronic tag falls off or becomes loose, will cause the electronic tag to fail. It can be taken to the bank where the ETC card was issued or the highway service office for inspection. If the loosening or detachment is not due to human factors, reactivation is sufficient. When using a debit card bound to ETC, insufficient balance can also lead to failed deductions. Follow the guidance of on-site staff to use the manual MTC lane and pass through by paying cash or swiping a card. If the car's windshield is too thick, it may cause poor sensing. This is particularly important for vehicles that have had accidents and had their windshields replaced or for those who have modified their front windshields.
16
1
Share

Is the Central Control Screen Not Lighting Up Due to a Fuse Failure?

If the central control screen is not lighting up, it may be due to a fuse failure caused by excessive load leading to the fuse blowing. Below is relevant information: Location: The fuse is located under the interior trim panel on the side of the main driver's central console. Its working principle involves electromagnetic induction, where the conductor cuts the magnetic field lines to generate an electric potential, converting the mechanical energy of the prime mover into electrical energy output. The fuse consists of a fuse element, electrode parts, and a support structure. Classification: Fuses can be categorized into flat-head tubular fuses, pointed-head tubular fuses, guillotine fuses, screw-type fuses, blade-type fuses, flat-plate fuses, wrapped fuses, and surface-mount fuses. Their function is to quickly melt when the circuit current exceeds twice the fuse's rated current, thereby protecting the circuit.
14
1
Share

Why Do Cars Need to Be Driven at High Speeds?

Driving a car at high speeds helps the engine and transmission adapt more quickly to high-speed operation, improves the smoothness of components such as pistons and gears, and also aids in removing carbon deposits from the engine, especially for vehicles frequently driven in congested urban areas. After the initial break-in period, the operation between engine components becomes more coordinated. At this stage, driving at high speeds can test the machine's extreme working conditions and expand the tensile, compressive, impact, and torsional resistance range of the component materials. Performing high-speed driving after the first maintenance service is safer, as the primary purpose of the first maintenance is to conduct thorough inspections of the vehicle, ensuring better safety measures are in place.
17
3
Share

What Happens If There Is No Antifreeze in the Car?

If there is no antifreeze in the car, it will affect the heat dissipation effect of the radiator, preventing the car from achieving the necessary cooling function and disrupting normal circulation. This can lead to engine overheating and, in severe cases, cause engine burn-out. In cold climates, it may also result in the engine or radiator freezing, leading to engine failure and rendering the vehicle unusable. Antifreeze serves multiple purposes, including anti-freezing, cooling, corrosion prevention, and scale prevention, ensuring the car can operate normally in cold weather without freezing and helping to cool down the high-temperature engine. When antifreeze is lacking, it is recommended to pull over, turn off the engine to lower the temperature, and only resume driving after the engine temperature has decreased. Driving time should not be prolonged, and antifreeze should be replenished promptly.
17
2
Share

What is the fuel consumption of the Jinjila?

The comprehensive fuel consumption per 100 kilometers is approximately 3.4L-3.7L. Below are the relevant details: Exterior: The fuel tank design of this vehicle is very rounded and full, with strong lines and high-quality decorative painting. The integrated saddle is quite confusing—it feels like a dual seat when it appears to be a single seat. This design is visually appealing but not very practical. The overall seat height is 690 millimeters, offering excellent affinity. Configuration: This model features aluminum alloy wheels, with low-end models equipped with CST tires and high-end models with Tengsen tires. The front tire specifications are 120-80-16, and the rear tire specifications are 150-80-15, providing good stability and flexibility. For the braking system, the vehicle uses large-sized disc brakes with single discs on both the front and rear. High-end versions also come with an ABS anti-lock braking system. The suspension system includes inverted front shock absorbers and adjustable rear shock absorbers. The rear swing arm is available in both steel and aluminum materials.
13
0
Share

Reasons Why a Motorcycle Fails to Accelerate After Getting Wet

In rainy weather, a motorcycle may fail to accelerate and is prone to stalling. This could be due to rainwater entering the fuel tank or carburetor, or the air filter getting wet, affecting the quality of the air-fuel mixture. It could also be caused by the ignition coil, high-voltage coil, ignition switch getting wet or damp, or the ignition or shutdown circuit being short-circuited due to water ingress. Below are the reasons and solutions for a motorcycle failing to accelerate after getting wet: Reasons: It could be due to water entering the fuel tank or carburetor, or the air filter getting wet, affecting the quality of the air-fuel mixture. It could also be caused by the ignition coil, high-voltage coil, ignition switch getting wet or damp, or the ignition or shutdown circuit being short-circuited due to water ingress. Solutions: Check the condition of the air filter and carburetor separately. Loosen the drain screw at the bottom of the carburetor to release some gasoline and test.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.