Does the Boyue have automatic parking?

1 Answers
LaCourtney
07/25/25 4:16am
The Geely Boyue does not have an automatic parking function, it only has an automatic hold function. There is a significant difference between automatic parking and automatic hold. Below is more related information: 1. Automatic Hold: The automatic hold function is very useful. Once this function is activated, you don't need to pull the handbrake or step on the brake when waiting at a traffic light, nor do you need to switch gears. Just stop the car and it will hold automatically. 2. Automatic Parking: The automatic parking function is a configuration that can automatically drive the car into a parking space. Cars equipped with automatic parking can detect a parking space when the automatic parking switch is turned on, and then the car can drive itself into the space. During this process, the driver only needs to control the switching between forward and reverse gears. Early automatic parking systems not only required the driver to control the switching between forward and reverse gears but also required the driver to control the brake and accelerator. Early automatic parking systems could only control the steering wheel.
Was this review help?
8
5
Share
More Forum Discussions

What are the correct steps for shifting gears on a motorcycle?

The correct steps for shifting gears on a motorcycle are: 1. Pay attention to whether the motorcycle engine's gear is an international gear or a circulating gear; 2. When downshifting, use the brake and release the throttle grip to reduce the motorcycle's speed; 3. Pull the clutch lever to fully disengage the clutch, and do not accelerate at the same time; 4. Use the foot shift lever to shift from a higher gear to a lower gear or neutral; 5. If you want to stop, pull the clutch lever, brake until the motorcycle stops, and shift to neutral. Precautions for shifting gears include: 1. The clutch engagement must be complete, as incomplete engagement or not fully engaged will cause the engine to idle; 2. Upshifting should be done step by step, while downshifting can skip gears, and any gear can be used to stop; 3. Accelerate before upshifting and decelerate before downshifting.
11
4
Share

What is the actual fuel consumption of the Trax?

The comprehensive fuel consumption of the Trax is 5.5-5.6L/100km. Currently, there are 5 models of the Trax available for sale: the Auto Fun Edition True Orange Limited Edition, Auto Fun Edition China VI, Auto Sport Edition China VI, with a comprehensive fuel consumption of 5.5L/100km. The CVT Premium Edition China VI and CVT Extreme Edition China VI have a comprehensive fuel consumption of 5.6L/100km. The above figures are NEDC comprehensive fuel consumption, which are the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 5.5-8.0L/100km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase a car's fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before encountering a red light, can increase fuel consumption. The car itself: Cars with larger displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean greater power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the gasoline injected during a cold start does not atomize easily, requiring more gasoline to be injected for combustion, thus increasing fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.
20
4
Share

What are the criteria for a vehicle to be declared a total loss?

The criteria for a vehicle to be declared a total loss are when the insured vehicle is completely destroyed or severely damaged, and the actual repair costs reach or exceed 80% of the vehicle's actual value. Upon mutual agreement between the insurer and the insured, the vehicle is deemed a constructive total loss, and the insurer compensates according to the regulations for total loss of the insured vehicle. There are two scenarios for compensation in the event of a total loss: 1. If the insured amount is higher than the actual value of the vehicle at the time of the incident, the compensation should be calculated based on the actual value at the time of the incident. 2. If the insured amount is equal to or lower than the actual value of the vehicle at the time of the incident, the compensation should be calculated based on the insured amount.
17
1
Share

Can the four wheel hubs be swapped randomly?

Can the four wheel hubs be swapped randomly? However, if the vehicle is equipped with a tire pressure monitoring system, the tire pressure monitoring sensors need to be transferred to the new wheel hubs, and the tire pressure monitoring system should be reset. If the system is not reset after swapping the wheels, it may trigger a tire pressure warning and fail to display normal tire pressure information. Therefore, it is advisable to promptly reset the tire pressure monitoring system. The wheel hub is a cylindrical metal component that supports the tire from the inside and is mounted on the axle. It is also known as a rim or steel wheel. Depending on the characteristics and requirements of different vehicle models, the surface treatment process of the wheel hub may vary, generally categorized into painting and plating.
15
3
Share

How to Apply for a Lifetime Exemption from Driver's License Inspection?

The method to apply for a lifetime exemption from driver's license inspection is: 1. If the motor vehicle driver has not accumulated 12 penalty points in any scoring cycle during the 6-year validity period of the motor vehicle driver's license, they can renew it for a 10-year valid motor vehicle driver's license; 2. If the motor vehicle driver has not accumulated 12 penalty points in any scoring cycle during the 10-year validity period of the motor vehicle driver's license, they can renew it for a long-term valid motor vehicle driver's license, which is a lifetime exemption from inspection, provided that no major traffic accidents have occurred. The full name of the driver's license is the motor vehicle driver's license, which is a certification document issued by the government transportation department to individuals who are qualified to drive, usually in the form of a card. To obtain a driver's license, one must meet the age requirement and pass the driving test.
16
2
Share

Is the Camry equipped with an Aisin transmission?

The Camry is equipped with an Aisin transmission. The transmission, also known as a gearbox, is an automotive component used to alter the speed and torque from the engine, and can fix or change the gear ratio between the output and input shafts. The transmission consists of a gear transmission mechanism and a control mechanism, with some vehicles also featuring a power output mechanism. Transmissions can be categorized into stepped, continuously variable, and integrated types. Taking the Camry 2021 2.5G Luxury Edition as an example, its body dimensions are 4885mm in length, 1840mm in width, and 1455mm in height, with a wheelbase of 2825mm. It is powered by a 2.5L naturally aspirated engine, with a front suspension type of MacPherson independent suspension and a rear suspension type of E-type multi-link independent suspension.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.