Does the Bora Legend have only one rear fog light?

1 Answers
DelAmir
07/29/25 8:12pm
The Bora Legend has only one rear fog light, and the other one is a reverse light. The structure of automotive fog lights: It consists of a reflector, lens, bulb or LED, shade, vertical light adjustment device, and housing. The main types are those with replaceable bulbs and movable reflectors, with bulbs mostly being 55W halogen bulbs, and beam adjustment generally only in the vertical direction. The working principle of automotive fog lights: The filament of the light source is designed at the focal point of the reflector's parabola, and after being reflected by the reflector, it forms a beam parallel to the optical axis. The lens diffuses and refracts the beam to form a wider horizontal beam, ensuring the light pattern and illumination meet regulatory requirements. The shade inside the front fog light blocks the light from the filament that would shine on the upper part of the reflector, creating a clear cutoff line in the light distribution—dark above and bright below. In the visible area at the upper edge of the light distribution pattern, it should be as dark as possible, while the bright area at the bottom should have a horizontal diffusion angle of 50 degrees on both sides, forming a left-right horizontal bright zone to provide good lighting conditions for safe driving without causing glare.
Was this review help?
4
2
Share
More Forum Discussions

How to activate cruise control on Camry?

The method to activate cruise control on Camry is: 1. Locate the switch on the control stalk near the driver's side on the right side of the steering wheel. Press the switch button to turn on the cruise control system, at which point the cruise control indicator light on the dashboard will illuminate; 2. Accelerate to your desired speed, then press the SET button. You can then release your right foot from the accelerator pedal, and the speed will be maintained at the current level; 3. If you need to make minor speed adjustments, you can use the RES and SET buttons to increase or decrease the speed accordingly; 4. If cruise control is canceled by applying the brakes or pressing the cancel button, you can press the RES button to resume the previously set cruise control speed. The Camry is a model under GAC Toyota, classified as a B-class mid-size vehicle. Its body dimensions are: length 4825mm, width 1820mm, height 1485mm, with a wheelbase of 2775mm and a minimum ground clearance of 155mm.
14
1
Share

How many points will be deducted for making a U-turn over a yellow line?

Making a U-turn over a yellow line will result in a deduction of 3 points. Crossing a solid double yellow line to make a U-turn is considered a traffic violation of disregarding prohibited markings, which will be penalized with a fine and a 3-point deduction. Additionally, if a traffic accident occurs, the driver will bear primary responsibility. Scenarios where U-turns are prohibited include: U-turns are prohibited at locations with 'No U-turn' or 'No Left Turn' signs: If there is a 'No U-turn' sign, U-turns are not allowed at that intersection. Since a U-turn is an extension of a left turn, intersections with 'No Left Turn' signs also prohibit U-turns. U-turns are prohibited at crosswalks: U-turns are not allowed on crosswalks. At intersections where U-turns are permitted, drivers must cross the crosswalk before making the U-turn and should not perform the maneuver on the crosswalk. U-turns are prohibited when there is no left-turn lane: Even in the leftmost lane, U-turns are not allowed unless there is a sign permitting left turns. U-turns are prohibited from the second left-turn lane: When a vehicle is in the second left-turn lane, it cannot make a U-turn. In the absence of any directional signs, U-turns are only permitted from the innermost left-turn lane. U-turns are prohibited at solid yellow lines: U-turns are not allowed at solid yellow lines. Even if there is a sign permitting U-turns, drivers must wait for the green light and cross the stop line before making the turn. U-turns are prohibited on highways: Making a U-turn by crossing the central divider on a highway is illegal and will result in a fine and a 12-point deduction. If you miss an exit on the highway, continue to the next exit instead of attempting an illegal U-turn.
11
0
Share

How to adjust the gear shift cable of the new Santana?

The adjustment method for the gear shift cable of the new Santana: 1. First, remove the base cover and separate the gear shift lever; 2. Shift gears and adjust the cable. During the adjustment process, distinguish the corresponding directions of the gear selection cable and the gear shift cable, and adjust all to the appropriate position. The gear shift cable is divided into two types: one is the gear shift cable, and the other is the gear selection cable. When shifting from forward gear to reverse gear, the gear lever needs to be moved left and right, so the left and right movement is controlled by the gear selection cable. The Santana is a compact car under SAIC Volkswagen. The car has a length, width, and height of 4475 mm, 1706 mm, and 1469 mm respectively, with a wheelbase of 2603 mm. In terms of appearance, the new Santana does not have many highlights. The overall design is relatively simple, without exaggerated lines. The waistline running from the front to the rear gives the body a strong sense of tension, and the multi-spoke wheels match the body very well.
10
5
Share

How to Use the Vehicle's Built-in Jack?

Usage method of the vehicle's built-in jack: 1. Before using the jack to lift the vehicle, ensure the vehicle is securely fixed to prevent instability after lifting, which could cause it to fall and injure someone; 2. After parking the vehicle, do not overlook necessary safety measures, such as turning on the hazard lights and placing a warning triangle; 3. When using the jack, pay close attention to the ground conditions. If the vehicle is on soft ground, place a large and hard support under the jack; 4. Typically, near the tire edges on both sides of the vehicle's chassis, there are support points for the jack. The lifting part of the jack must align with the chassis support points to prevent slipping. Otherwise, it may be difficult to secure the vehicle, leading to jack slippage or even damage to the chassis; 5. After lifting the vehicle, do not rush to remove the wheel hub bolts. Place the spare tire under the vehicle as a precaution in case the jack fails, ensuring the vehicle has a cushion if it falls; 6. When using the jack to lift the vehicle, operate steadily and slowly. Avoid using excessive or sudden force to prevent damaging the jack.
4
1
Share

When visibility is less than 100 meters, what should the speed and distance between vehicles be maintained at?

When visibility is less than 100 meters, the speed should not exceed 40 kilometers per hour, and the distance between vehicles should be maintained at more than 50 meters. Below is more relevant information: 1. Precautions for driving on highways: Enter the traffic lane correctly. When vehicles enter the highway from the ramp entrance, they must increase their speed in the acceleration lane and turn on the left turn signal. They can enter the traffic lane from the acceleration lane without affecting the normal driving of vehicles in the traffic lane, and then turn off the turn signal. Maintain a safe distance. When driving at high speed, the following vehicle in the same lane must maintain a sufficient safe distance from the vehicle in front. Overtake with caution. When overtaking is necessary, first observe the status of the vehicles in front and behind, and turn on the left turn signal at the same time. 2. Relevant regulations: When visibility is less than 200 meters, turn on the fog lights, low beam lights, position lights, and front and rear position lights. The speed should not exceed 60 kilometers per hour, and the distance from the vehicle in front in the same lane should be more than 100 meters. When visibility is less than 50 meters, turn on the fog lights, low beam lights, position lights, front and rear position lights, and hazard warning flashers. The speed should not exceed 20 kilometers per hour, and the vehicle should exit the highway from the nearest exit as soon as possible.
5
3
Share

What does Elysian ECON mean?

Elysian ECON is the abbreviation for the low-carbon and eco-friendly driving mode. This button can turn the energy-saving mode on or off. Modern cars generally offer three driving modes to choose from: Eco mode, Comfort mode, and Sport mode. Below is information about these three modes: Eco mode: When the car is in this mode, fuel consumption is relatively low. The throttle pedal sensitivity decreases, and the transmission shifts up more aggressively. Comfort mode: This mode can be considered a normal operating mode for the car. In this mode, the throttle pedal response is more sensitive than in Eco mode. Sport mode: Sport mode can be used during aggressive driving. After activating Sport mode, the throttle pedal response becomes very sensitive, and the transmission delays shifting. The transmission only upshifts when the engine speed reaches the redline. After switching to Sport mode, the engine speed is maintained at around 3,000 RPM, ensuring better power response during acceleration. When the car enters ECON mode, it achieves reduced fuel consumption and energy savings, but the car's power output weakens. ECON can be understood as the abbreviation for 'economy.' In most cases, it is recommended to keep ECON mode enabled. Only when high torque output is required (e.g., climbing a hill) or when driving at very high speeds should ECON mode be turned off. After pressing the ECON button, the car enters the low-carbon and eco-friendly driving mode. The ECU, engine, and transmission then intelligently execute the driver's intentions in the most fuel-efficient manner, achieving optimal fuel economy through quick upshifts and smooth acceleration. When the driver presses the throttle pedal deeply, the ECON system effectively controls the opening and closing of the intake valves to ensure smooth engine operation and energy savings. Although ECON mode is simple and effective, it cannot operate under certain conditions: When the vehicle speed exceeds 120 km/h, priority is given to speed, and the Eco mode automatically deactivates. This means that if the car exceeds the economical speed range (usually between 60–90 km/h), ECON mode will not save fuel. The key to ECON mode is the independent operation of the car's computer during driving to ensure effectiveness. Therefore, ECON does not function during idle parking or when in N, P, or manual mode. When overcoming significant resistance or requiring high torque output, such as when climbing a hill, the ECU prioritizes ensuring sufficient power to drive the car, and ECON mode will not work in such situations.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.