Does the BMW X5 have air suspension?

2 Answers
VonHector
07/23/25 9:09pm
BMW X5 has air suspension. Models equipped with air-adjustable suspension will have ground clearance sensors near the front and rear wheels. Advantages of air suspension: One major advantage of air suspension is its ability to automatically adjust the stiffness of the springs. When driving at high speeds, the suspension automatically becomes firmer to provide better support for the vehicle, ensuring more stable driving. During prolonged low-speed driving, the suspension automatically softens to offer better comfort for passengers. Introduction to air suspension: Models equipped with air-adjustable suspension have ground clearance sensors near the front and rear wheels. Based on the signals from these sensors, the vehicle's computer determines changes in the body height and then controls the air compressor and exhaust valves to automatically compress the springs.
Was this review help?
12
5
Share
ElliottAnn
08/10/25 7:03pm
As someone who frequently drives long distances, I'm quite familiar with the BMW X5. It offers optional air suspension, but this depends on the specific model. For example, the high-performance M50i version includes this option, while the base model might not. Air suspension does enhance comfort, especially on bumpy roads, as it automatically adjusts the height to keep the car stable. However, I must remind you that maintaining this feature isn't cheap—replacing it can cost several thousand dollars. So, if you mainly drive in the city, there's no need to add it. During regular maintenance, make sure to check the airbags and electronic systems to prevent aging. Additionally, the BMW X5's off-road capability is stronger with air suspension, making it easier to handle mud or slopes, though fuel consumption may increase slightly. Overall, it's a great feature, but whether it's worth buying depends on your personal needs and budget.
Was this review help?
18
2
Share
Expand All
More Forum Discussions

What is the reason for the increased noise after installing the engine guard plate?

After installing the engine guard plate, the increased noise is caused by friction between the plate and the moving parts outside the engine, resulting in abnormal sounds. Another situation is when the plate's vibration frequency is close to that of the car, leading to resonance. Precautions: Keep the engine compartment clean to prevent road water and dust from entering. Avoid sand, stones, and hard objects kicked up by the tires during driving from hitting the engine. While there may be no immediate impact on the engine, prolonged exposure can still affect it. Disadvantages: Hard engine guard plates may hinder the protective sinking of the engine during a collision, weakening this safety feature. Steel engine guard plates, made from ordinary steel and forcibly stretched using forming molds, typically weigh between 8-13 kg. They are installed with standard steel screws and feature a semi-enclosed design with openings for the oil filter, oil hole, and transmission oil hole. The lack of a thoughtful air vent design increases air turbulence in the engine compartment, raising wind resistance and noise. During driving, steel spacers and the steel guard plate can resonate, amplifying the noise.
11
5
Share

What kind of engine oil does the Tharu use?

The Tharu uses 5W40 engine oil. The functions of engine oil are: 1. Reducing friction and high temperatures; 2. Cooling and lowering temperature; 3. Cleaning and purifying; 4. Shock absorption and cushioning; 5. Rust and corrosion prevention. The Volkswagen Tharu is a compact 5-door, 5-seat SUV with body dimensions of 4453mm in length, 1841mm in width, and 1632mm in height, with a wheelbase of 2680mm. The Volkswagen Tharu is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 110 kW and a maximum torque of 250 Nm. It features front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension using multi-link independent suspension.
16
0
Share

Where is the Mondeo's Cabin Air Filter Located?

The Mondeo's cabin air filter is located inside the glove compartment on the passenger side. Open the passenger door, access the glove box, and pry open the decorative panel beside it to reveal the filter. The Mondeo is a mid-size sedan under Ford. Taking the 2020 Mondeo 180 Fashion model as an example, its body dimensions are: length 4873mm, width 1852mm, height 1470mm, with a wheelbase of 2850mm and a fuel tank capacity of 62.5 liters. The 2020 Mondeo 180 Fashion is equipped with a 1.5T inline 4-cylinder turbocharged engine, delivering a maximum power of 134kW at 6000rpm, paired with a 6-speed automatic transmission.
7
2
Share

What is the maintenance interval for the Geely Emgrand GS?

The maintenance interval for the Geely Emgrand GS is every 5,000 kilometers or 3 months. The gasoline filter should be replaced every 30,000 kilometers, the spark plugs every 20,000 kilometers, and the brake fluid and coolant every 40,000 kilometers. Taking the 2020 Geely Emgrand GS as an example, its body dimensions are: length 4,440mm, width 1,833mm, height 1,573mm, with a wheelbase of 2,700mm and a fuel tank capacity of 55 liters. The 2020 Geely Emgrand GS is equipped with a 1.4L turbocharged engine, delivering a maximum power of 104kW and a maximum torque of 235Nm, paired with a 6-speed manual transmission. It features a front MacPherson strut independent suspension and a rear torsion beam non-independent suspension.
3
3
Share

Should You Shift to P Gear or Turn Off the Engine First When Parking an Automatic Car?

When parking an automatic car, you should turn off the engine first. The parking steps are: 1. Slow down and press the brake, shift to N gear, then turn off the engine; 2. Pull the handbrake, release the foot brake, and after the car comes to a complete stop, shift to P gear. The starting steps for an automatic car are: 1. Insert the key, shift to P gear, press the brake, shift to N gear, and start the engine; 2. Shift from N gear to D gear, release the handbrake and foot brake to start moving. The gears of an automatic car are: 1. P is the Parking gear: Used for starting and long-term parking; 2. R is the Reverse gear: Used for reversing; 3. N is the Neutral gear: Used for short-term parking; 4. D is the Drive gear: Also known as the driving gear, used for smooth forward movement; 5. L is the Low gear: Used for going downhill or uphill; 6. S is the Sport mode: Used for overtaking to get stronger power; 7. M is the Manual mode: Can be adjusted for manual driving.
12
3
Share

How to Turn Off the Start-Stop Function in Audi Q5?

The methods to turn off the start-stop function in Audi Q5 are: 1. Locate the automatic start-stop switch near the center console and turn it off; 2. Use a specialized diagnostic tool to disable it. Taking the 2018 Audi Q5 as an example, its body dimensions are: length 4629mm, width 1898mm, height 1655mm, wheelbase 2807mm, and fuel tank capacity 75l. The 2018 Audi Q5 is equipped with a 2.0T turbocharged engine, delivering a maximum power of 169kW and a maximum torque of 350Nm, paired with an 8-speed automatic manual transmission. Both front and rear suspensions feature a five-link independent suspension system.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.