Does the BMW X3 have 4WD?

How to turn off the auto start-stop function on BMW X5?

Use the auto start-stop system switch button to turn off the auto start-stop function. The button is located next to the car's start button. When turning off the auto start-stop on BMW X5, the vehicle needs to be in a stationary state; otherwise, it may damage the car engine. Frequently turning the start-stop on and off while the vehicle is in motion can cause excessive load on the motor. Related information: 1. Auto Start-Stop: The English name for auto start-stop is STOP-START, abbreviated as STT. The STT intelligent fuel-saving system is a set of controls for the engine start and stop system. 2. Auto Start-Stop Principle: When the driver presses the brake pedal and stops the vehicle, the Start/Stop system automatically detects if the engine is idling and not in gear, the anti-lock system wheel speed sensor shows zero, and the electronic battery sensor indicates sufficient energy for the next start. If these three conditions are met, the engine automatically stops. When the driver presses the clutch, the engine can be started immediately. In automatic transmission models, as soon as the brake is released or the steering wheel is turned, the engine automatically ignites again, allowing the driver to press the accelerator and start immediately.

1

4

Share

Will Insurance Cover Flood-Damaged Vehicles?

Comprehensive vehicle damage insurance is required to receive full compensation. For engine damage caused by driving through water, if the vehicle is insured with a water wading coverage, the engine damage falls within the insurance coverage. If the vehicle is not insured with water wading coverage, the insurance company will only cover the cleaning costs, and engine repair expenses will not be included. Below is additional information about auto insurance: 1. Vehicle damage insurance is the primary coverage, and water wading coverage is a derivative: The full name of water wading coverage is "Engine Damage Insurance for Water Wading Driving," which means that during the insurance period, if the insured vehicle is damaged due to improper operation while driving through water or being submerged, the insurance company will provide compensation within the coverage limits. Vehicle damage insurance must be purchased to add water wading coverage. 2. According to Article 4 of China's "Family Owned Vehicle Loss Insurance Clause": During the insurance period, if the insured or an authorized driver causes damage to the insured vehicle due to the following reasons while using the vehicle, the insurer is responsible for compensation as per the insurance contract: (1) Collision, overturning, falling. (2) Fire, explosion, spontaneous combustion. (3) Falling or collapsing of external objects, etc.

19

3

Share

Is the 2019 New Sylphy compliant with China VI emission standards?

2019 New Sylphy is compliant with China VI emission standards. The following is a detailed introduction to the China VI emission standards: 1. It is an upgraded version of the current China V emission standards, with stricter limits on the emissions of CO (carbon monoxide), THC (total hydrocarbons), NMHC (non-methane hydrocarbons), NOX (nitrogen oxides), and PM (particulate matter) compared to China V standards. Additionally, it introduces new regulations on PN (particulate number) emissions. 2. According to estimates, under the China VI emission standards, the emissions of carbon monoxide, hydrocarbons, non-methane total hydrocarbons, and nitrogen oxides from light gasoline vehicles will be reduced by about 50% compared to the China V phase, and particulate matter emissions will be reduced by about 40%. For heavy-duty diesel vehicles, nitrogen oxides and particulate matter will be reduced by more than 60% compared to the China V phase. 3. In addition to stricter emission requirements, the cold-start test cycle has been adjusted from the NEDC cycle under China V to the WLTC cycle under China VI, resulting in an increase in actual emissions. The dual-idle test will be adjusted to the actual driving test (RDE) starting from July 1, 2023, leading to higher tailpipe emissions. Considering that vehicle exhaust accounts for 20% to 40% of air pollution in first-tier cities, the implementation of China VI can bring a noticeable improvement of more than 10% in urban air quality. 4. On December 23, 2016, the Ministry of Environmental Protection and the General Administration of Quality Supervision, Inspection and Quarantine issued the "Limits and Measurement Methods for Emissions from Light-Duty Vehicles (China VI)", which came into effect on July 1, 2020. On June 22, 2018, the Ministry of Environmental Protection and the General Administration of Quality Supervision, Inspection and Quarantine issued the "Limits and Measurement Methods for Emissions from Heavy-Duty Diesel Vehicles (China VI)", which came into effect on July 1, 2019.

20

3

Share

How many seconds does it take for the Audi A4 to accelerate from 0 to 100 km/h?

According to official data, the Audi A4 2.0T model takes 9.7 seconds to accelerate from 0 to 100 km/h. Factors affecting the vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in layman's terms, indicates how much force is available. The greater the torque, the more force is available to propel the vehicle, resulting naturally in faster acceleration. The BMW 320i has a maximum torque of 205 Nm and accelerates from 0 to 100 km/h in 9 seconds. The Audi A4 2.0T model has a torque of 270 Nm and accelerates from 0 to 100 km/h in 9.7 seconds. Transmission efficiency: The transmission is the medium for transferring power and inevitably involves power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, the ranking of transmission efficiency is as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Audi A4 is equipped with a wet dual-clutch transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit is Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The BMW 320i has a power-to-weight ratio of 106 Hp/T and accelerates from 0 to 100 km/h in 9 seconds. The Audi A4 has a power-to-weight ratio of 93 Hp/T and accelerates from 0 to 100 km/h in 9.7 seconds.

9

5

Share

What is the Difference Between Turbocharging and Twin-Turbocharging?

Twin-turbocharging is a type of turbocharging that utilizes a forced induction system with two independent turbochargers, whereas conventional turbocharging typically refers to single turbocharging. Below is an introduction to turbocharging technology: 1. Concept: Turbocharging technology (Turbo) is a method to enhance an engine's air intake capacity. 2. Advantages and Disadvantages: The advantages include significantly increasing power and torque without enlarging engine displacement, as well as improving fuel economy and reducing exhaust emissions. The drawback is that after adopting exhaust turbocharging technology, the engine's peak combustion pressure and average temperature during operation will rise substantially, thereby affecting the engine's mechanical performance and lubrication properties.

17

1

Share

What is the ideal heat insulation rate for solar films?

Solar films with higher heat insulation rates are generally better, and products exceeding 50% can typically be considered high-quality. Additional information about automotive window films is as follows: 1. Overview: Automotive window films (Auto-tint-film) involve applying a thin film layer to the vehicle's front and rear windshields, side windows, and sunroof. This film layer is also referred to as solar film or heat insulation film. 2. Functions: Primarily, it blocks ultraviolet rays, reduces heat penetration, prevents injuries from shattered glass, and minimizes glare. Additionally, due to the one-way visibility feature of solar films, they help protect personal privacy.

3

1

Share

Does the BMW X3 have 4WD?

How to turn off the auto start-stop function on BMW X5?

Will Insurance Cover Flood-Damaged Vehicles?

Is the 2019 New Sylphy compliant with China VI emission standards?

How many seconds does it take for the Audi A4 to accelerate from 0 to 100 km/h?

What is the Difference Between Turbocharging and Twin-Turbocharging?

What is the ideal heat insulation rate for solar films?

How many liters of engine oil does the Mondeo 2.0t require?

What is the difference between H4L and L4L?

Is the rearview mirror heating function useful?

Do Brake Pads and Brake Discs Need to Be Replaced Together?