Does the BMW M4 have a four-door version?

Can an out-of-town vehicle be sold in another location?

An out-of-town vehicle can be sold in another location. You need to go to the original registration location's vehicle management office to complete the file transfer and relocation procedures, then take the relevant documents to the vehicle management office in the area where you want to register the vehicle to complete the transfer and licensing procedures. Relevant information about vehicle transfer is as follows: 1. Introduction: Vehicle transfer refers to changing the name of the vehicle's owner. When buying a used car, besides checking the condition of the car, the most important step is completing the transfer procedures. 2. Principle: Every vehicle has a fixed registration, which mainly records the owner and address of the vehicle, as well as some related vehicle parameters. Transferring a vehicle proves that the car belongs to the current owner and has no accidents or violations. If the vehicle has issues, such as being involved in an accident, failing to undergo annual inspection, being stolen, or being smuggled, it cannot be transferred through normal procedures.

2

3

Share

Can You Drive If Water Hasn't Submerged the Exhaust Pipe?

You should not drive if water hasn't submerged the exhaust pipe. If the car's exhaust pipe takes in water and the engine stalls (which is actually caused by water entering the intake), do not attempt to forcibly restart the engine. Instead, call for rescue services immediately. After a simple cleaning and drying process at a 4S shop, the engine can return to normal operation, and the repair costs are relatively low. The correct method for driving through water: 1. Slow down or stop to observe: When encountering accumulated water while driving, if the water level exceeds the bumper or two-thirds of the tire height, driving through it poses certain risks. Additionally, driving too fast through water can cause splashes to enter the cabin through the engine compartment or chassis. You should assess the water level; if it is high, try to detour and avoid forcing your way through. 2. Do not stop or shift gears: When driving through water, maintain a steady speed with low gear and medium-high throttle, driving at a low speed. Avoid stopping, shifting gears, or releasing the throttle. 3. Do not restart the engine: If the car stalls in water, take measures to tow it to a safe location with less water as soon as possible. Do not attempt to restart the engine to prevent damage. 4. Remove brake pad moisture promptly: This prevents the vehicle from losing braking ability after driving through water, which could lead to danger or accidents.

9

1

Share

Why Spray Dish Soap Water When Applying Stickers?

When peeling off the protective layer of the film, one side has adhesive (or silicone). For large-area film application, it's impossible to attach it directly while maintaining a smooth finish. Spraying dish soap water primarily serves as a lubricant. This allows air bubbles and moisture to be squeezed out. The recommended ratio is about 5 to 6 drops of dish soap per jug of water. Shake well and adjust to a spray mist until bubbles appear on the glass. Relevant information about car window tinting is as follows: 1. Introduction: Car window tinting (Auto-tint-film) involves applying a thin film material to the front and rear windshields, side windows, and sunroof of a vehicle. This film is also called solar film or heat insulation film. 2. Functions: Its main purposes are to block UV rays, reduce heat transmission, prevent injuries caused by shattered glass, reduce glare, and protect personal privacy through the one-way visibility feature of the film.

14

2

Share

How to Deal with Repeated Violations on the Same Road Section?

On the same day, for multiple violations on the same road under the jurisdiction of the same traffic police unit, only the most severe one can be processed. According to Article 24 of the Administrative Penalty Law of the People's Republic of China: For the same illegal act committed by a party, no administrative penalty of a fine shall be imposed more than once. Reasons for the delay in clearing the fine record: 1. System delay in the traffic violation query platform: From the occurrence of a violation, being captured, confirmed, and publicized, it takes certain procedural steps. Similarly, processing the points deduction and paying the fine also requires going through procedures. 2. Use of third-party agency services: With the rapid development of smartphones, various apps and public accounts for handling violations have emerged endlessly. The time taken to process violations varies depending on the channels each agency uses to clear the violations.

7

4

Share

What Causes the Windshield to Be Blurry After Tinting?

After tinting, the windshield may appear blurry due to the glass not being cleaned properly during the tinting process or because of the low clarity of the film itself. If high-quality installation and good film are used, the result should be a seamless integration between the film and the glass, without causing any discomfort to the driver's vision—it should actually enhance comfort. Here is some related information about car window tinting: 1. Introduction: Car window tinting (Auto-tint-film) involves applying a thin film to the front and rear windshields, side windows, and sometimes the sunroof. This film is also known as solar film or heat-insulating film. 2. Functions: The primary purposes of window tinting are to block ultraviolet rays, reduce heat, prevent injuries from shattered glass, reduce glare, and, thanks to the one-way visibility feature of the film, protect personal privacy.

9

4

Share

Why does the car stall when braking without pressing the clutch?

Braking without pressing the clutch will cause the car to stall because the clutch does not fully disengage, leading to engine shutdown. If you fully press the brake without pressing the clutch, the power transmission to the wheels is blocked by the resistance of the locked wheels, and due to the reaction force, the car will inevitably stall. The reasons for brake noise when not pressing the brake are as follows: 1. Using low-quality or overly hard brake pads: If inferior or overly hard brake pads are used, they will produce a squeaking sound when rubbing against the brake disc during braking. Therefore, always use high-quality brake pads when replacing them. 2. Sand or foreign objects between the brake pads and brake disc: During normal driving, it is inevitable to encounter complex road conditions. Due to the unique design of disc brakes, sand and foreign objects can get between the brake pads and the brake disc, which can also cause noise during braking.

18

2

Share

Does the BMW M4 have a four-door version?

Can an out-of-town vehicle be sold in another location?

Can You Drive If Water Hasn't Submerged the Exhaust Pipe?

Why Spray Dish Soap Water When Applying Stickers?

How to Deal with Repeated Violations on the Same Road Section?

What Causes the Windshield to Be Blurry After Tinting?

Why does the car stall when braking without pressing the clutch?

What type of oil does the Kia K3 use?

How Many Powertrain Options Does the Passat Offer?

What is Speed Odometer?

Should the foot lift or slide when releasing the clutch?