Does the BMW F30 316 use a four-cylinder engine?

1 Answers
EllianaMarie
07/30/25 3:31am
BMW F30 316 uses a four-cylinder engine. This model is equipped with a 1.6-liter turbocharged four-cylinder engine, codenamed N13B16A, which delivers a maximum power of 136 horsepower and a peak torque of 220 Nm. The F30 is the chassis code for the standard wheelbase version of the sixth-generation BMW 3 Series. The BMW 3 Series is a new generation of sedan products from the BMW Group, largely retaining the design style of the overseas version of the new 3 Series. The sharp LED headlight clusters connect with the enlarged glossy black kidney grille, complemented by the front bumper air intakes and three-dimensional lines.
Was this review help?
18
1
Share
More Forum Discussions

What is the displacement of the Accord?

The Accord comes in three displacement options, which are models equipped with 1.5T and 2.0T turbocharged engines, and a 2.0L naturally aspirated engine model. The corresponding displacements are 1.5 liters and 2.0 liters. Displacement refers to the exhaust volume, and the cylinder working volume is the volume swept by the piston from the top dead center to the bottom dead center, also known as the single-cylinder displacement. It depends on the cylinder bore and piston stroke. The engine displacement is the sum of the working volumes of all cylinders, generally expressed in liters (L). Introduction to methods for checking car displacement: Check the vehicle nameplate: The vehicle nameplate is a label that indicates the basic characteristics of the vehicle, including the manufacturer, model, engine power, total weight, load capacity or passenger capacity, factory number, manufacturing date, and manufacturer name. It details the manufacturing date of the car, the engine displacement, and power parameters, among others. It is usually located at the lower part of the passenger side door and can be seen when the door is opened. Advantages of a 2.0L displacement: Most manufacturers invest more effort in the exterior design of 2.0L displacement models, making them appear more dignified and refined. 2.0L models generally employ more advanced car manufacturing technologies, offering significant performance advantages compared to 1.6L displacement models, while also providing better fuel economy and lower usage costs than 2.4L and larger displacement models. For car manufacturers, 2.0L models can be considered a win-win, as they not only enhance brand recognition but also generate considerable profits.
11
5
Share

Which country does GAC FCA belong to?

GAC FCA is a Chinese company, with vehicles produced in China. However, Jeep is an American automotive brand, and the foreign investor contributes the brand, technology, capital, and talent, making it a joint venture. Below are specific details about GAC FCA: 1. Establishment Background: GAC Fiat Chrysler Automobiles Co., Ltd. (referred to as GAC FCA) was established on March 9, 2010, jointly invested by Guangzhou Automobile Group Co., Ltd. (referred to as GAC Group) and Stellantis Group with a 50:50 share ratio. 2. Vehicle Models: Fiat Chrysler Automobiles (FCA) operates brands in Europe including Fiat, Lancia, Ferrari (independent since 2016), Abarth, Alfa Romeo, and Maserati. In North America, FCA operates brands such as Chrysler, Dodge, Jeep, and Ram Trucks.
13
3
Share

What Are the Reasons for a Car's Heater Not Blowing Hot Air?

To determine why a car's heater is not blowing hot air, check the temperature of the two inlet pipes of the heater core. If both pipes are sufficiently hot, the issue likely lies with the air flow control mechanism. Conversely, if both pipes are cold, or if one is hot and the other is cold, the problem is likely within the cooling system. A thermostat that is stuck open or opens too early can cause the cooling system to enter a large cycle prematurely. However, when the external temperature is very low, especially while driving, the cold air quickly cools the antifreeze, preventing the engine coolant temperature from rising and thus the heater from blowing hot air. A damaged or slipping water pump impeller can reduce the flow rate through the heater core, preventing sufficient heat transfer. Air pockets in the engine cooling system can disrupt circulation, leading to high coolant temperatures and a non-functional heater. If air constantly enters the cooling system, it may indicate a damaged cylinder head gasket allowing combustion gases to leak into the cooling system. If the inlet pipe of the heater core is hot but the outlet pipe is cold, the heater core is likely clogged and needs replacement. Solution: When using the heater, avoid turning on the A/C switch, as the heater operates using the car's own heat cycle. Activating the A/C will only increase fuel consumption. Set the air conditioning to recirculation mode and periodically switch to fresh air mode. For long drives, alternate between recirculation and fresh air modes to ensure proper air circulation inside the car.
3
5
Share

How Early Can I Get My Vehicle Inspection Sticker?

In addition to the regular annual inspection, you can have your vehicle inspected at the DMV up to three months in advance. Below is relevant information about vehicle inspections: 1. Vehicle Inspection Overview: The timing for a vehicle inspection is calculated by month, not by a specific date. For example, if your vehicle inspection is due on September 10th, you can have it inspected in advance during July, August, or September. 2. Important Notes: If a vehicle continues to be driven on the road without undergoing the required inspection by the due date, the owner will be fined 200 yuan and receive a three-point penalty, and the vehicle will be temporarily impounded. If the inspection is not completed on time, any previously purchased vehicle insurance will not be valid. In the event of a traffic accident during this period, the insurance company will not provide compensation.
18
4
Share

What are the differences between Civic National V and National VI?

Here are the specific differences between Civic National V and National VI: 1. Emission standards: The Civic National V complies with the National V emission standard, and new vehicle registrations have been suspended in most regions of China; National VI complies with the National VI emission standard. 2. Emission levels: Under the National V standard, gasoline vehicles emit 1000 mg/km of carbon monoxide, while the National VI standard reduces this to 700 mg/km. The National VI standard is more stringent than National V, reducing nitrogen oxides by 77% and particulate matter by 67%, introducing limits on particulate number, and tightening requirements for emission control device durability and on-board diagnostic systems.
20
5
Share

What is the top speed of the Wuling Hongguang S?

The Wuling Hongguang S comes in two models, with the 1.2L model having a top speed of 120 km/h and the 1.5L model reaching a top speed of 155 km/h. The Wuling Hongguang S is a microvan under the Wuling brand, with a wheelbase of 2720 mm and dimensions of 4420 mm in length, 1685 mm in width, and 1755 mm in height. The 1.5L naturally aspirated engine in the Wuling Hongguang S delivers a maximum power of 73 kW and a maximum torque of 140 Nm, with the peak torque occurring between 3400 to 4400 rpm. This engine is equipped with multi-point fuel injection technology and features an aluminum cylinder head with a cast iron cylinder block. This engine is paired with a 6-speed manual transmission. The 1.2L naturally aspirated engine in the Wuling Hongguang S produces a maximum power of 56 kW and a maximum torque of 110 Nm, with the peak torque available between 3000 to 4000 rpm. This engine also utilizes multi-point fuel injection technology and has an aluminum cylinder head with a cast iron cylinder block. This engine is matched with a 5-speed manual transmission.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.