Does the BMW 5 Series Have Tire Pressure Monitoring?

1 Answers
StKate
07/28/25 10:37pm
The BMW 5 Series is equipped with tire pressure monitoring. The working principle of the tire pressure monitoring system is as follows: an internal sensor is installed on the tire hub, which includes a bridge-type electronic pressure sensing device to detect air pressure. This device converts the pressure signal into an electrical signal, which is then transmitted via a wireless transmitter. The functions of the tire pressure monitoring system are: 1. It provides timely alerts in case of rapid or slow air leakage when the tire is punctured; 2. It issues an alarm when tire loosening causes unbalanced friction, leading to tire temperatures reaching 70 degrees Celsius, helping to prevent blowouts; 3. If the tire pressure remains low for an extended period and falls below the vehicle's preset limit, it alerts the driver to prevent blowouts caused by low pressure and rising tire temperatures.
Was this review help?
14
2
Share
More Forum Discussions

What is the battery degradation of a Tesla after 7 years of use?

The battery degradation of a Tesla after 7 years of use is 5.4%. Here are the relevant details: 1. Precautions: Charge the vehicle when the remaining battery level is between 5%-10%, and only charge it up to 90%-95%. This helps maintain battery life and prevents excessive degradation of the Tesla car battery. 2. Regulations: According to domestic policies, electric vehicles should provide an 8-year or 150,000-kilometer warranty for the battery. During the warranty period, battery degradation should not exceed 30%. If the battery degradation is severe, it can only be replaced. Tesla has made a product quality assurance commitment for the power battery and drive unit.
11
4
Share

Can eCVT Withstand High Torque?

eCVT has no direct relation to withstanding high torque. Understanding eCVT: eCVT is not a traditional transmission in the true sense. It consists of a planetary gear set connecting an Atkinson cycle engine and two electric motors, capable of transmitting various torque levels from the engine without loss. The strong initial acceleration in hybrids is due to electric motors being able to instantly deliver maximum torque at any RPM, which is unrelated to eCVT. High Efficiency of eCVT: The mechanical connection in eCVT bypasses any clutch or torque converter, making its efficiency primarily dependent on the electrical circuit's efficiency.
4
5
Share

How Many Amps is a Car Generator Current?

Car generator outputs a maximum current of 100A. Below is the relevant introduction about car generators: 1. Function: The car generator is the main power source of a vehicle. Its function is to supply power to all electrical equipment (except the starter) when the engine is running normally (above idle speed), while also charging the battery. 2. Principle: When the switch is closed, the battery provides the current first. The circuit is: battery positive → charging indicator light → regulator contact → excitation winding → ground → battery negative. At this time, the charging indicator light will illuminate because there is current passing through it.
7
4
Share

What is the Difference Between Car Coolant and Antifreeze?

Car coolant and antifreeze differ in the following aspects: 1. Antifreeze is suitable for all seasons. Both the water reservoir and radiator in a car can be filled with antifreeze to regulate temperature differences. 2. Coolant contains water and antifreeze. Water is a commonly used cooling substance, but its effectiveness is inferior to antifreeze. Typically, water and antifreeze are mixed together when added. 3. Due to significant temperature variations between northern and southern regions, their usage processes also differ greatly. Coolant works best in southern areas, while its use in northern regions is problematic as frozen scale deposits can affect driving performance.
15
5
Share

What Causes Moisture in Car Exhaust?

The main reasons for moisture in car exhaust are as follows: 1. Part of the water flowing from the exhaust pipe comes from the moisture in the fuel, and part comes from the humidity in the air, especially during cold seasons or when the weather is particularly humid. 2. The car expels the combustion byproducts, which cool down in the exhaust pipe and form water. The amount of water flow depends on the car's performance and displacement; cars with better performance and larger displacement tend to have more water flow. 3. The car engine inhales air and atomized gasoline, which is then ignited by the spark plug to perform work. After complete combustion, the combustible gas becomes exhaust, the main components of which are carbon dioxide and water vapor.
17
5
Share

What are the steps for valve disassembly and installation?

Valve disassembly and installation steps are as follows: 1. Remove the valve adjustment shim. 2. Remove the intake and exhaust valves. Use a valve removal pliers to compress the valve spring, then remove the lock piece, spring seat, valve spring and valve in sequence. 3. Use needle-nose pliers to remove the valve stem oil seal. 4. Use compressed air and a magnetic rod to remove the spring seat and washer. 5. Remove the half-moon key. The installation of the automobile engine valve group only needs to follow the reverse order of disassembly. Notes: Do not scratch the valve seat ring, and the valve oil seal should be replaced with a new one to avoid unnecessary trouble.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.