Does the BMW 3 Series have a four-wheel drive model?

2 Answers
ArthurDella
07/24/25 9:26am
The 2019 BMW 3 Series 320Li xDrive Fashion model is a front-engine four-wheel drive vehicle. Front-engine four-wheel drive means the engine is located at the front of the car, and all four wheels drive the vehicle. Since all four wheels have power, compared to designs that only rely on front-wheel or rear-wheel drive, front-engine four-wheel drive offers superior handling performance. Here is more information about it: 1. In terms of exterior design, the full-LED Angel Eye headlights paired with the black double-kidney grille make it more imposing than the standard 3 Series. 2. Although the interior hasn't changed much, the upgrades in configuration are quite noticeable. The 8.8-inch touchscreen iDrive system now features a new UI interface, fully aligning with the 5 Series, and supports touch operation. 3. In terms of power, it still offers the option of a 1.5T and 2.0T engine with high and low power outputs. The 1.5T model has a maximum power of 100kW (136PS) and a maximum torque of 220N·m.
Was this review help?
17
3
Share
Regina
08/11/25 4:48am
I've been researching BMW's car series recently, especially the 3 Series, and I can confirm it has a four-wheel-drive version called xDrive. Starting from the previous generation, BMW has widely introduced this option on the 3 Series, such as the 330i xDrive or 340i xDrive, which all come standard with the intelligent all-wheel-drive system. This system primarily uses rear-wheel drive for fuel efficiency under normal conditions, but it automatically switches to all-wheel-drive mode when detecting slippery roads or signs of skidding, dynamically distributing torque between the front and rear axles. It provides better stability in rainy or snowy weather and reduces the risk of losing control in city traffic jams. If you live in an area with frequent rain or snow or often drive on mountain roads, I recommend opting for xDrive, as it significantly improves handling and safety. However, it's worth noting that the all-wheel-drive version is slightly heavier, resulting in slightly higher fuel consumption compared to the rear-wheel-drive model. When purchasing a new car, choose the appropriate configuration based on your driving habits and budget. You can check the details of specific models on BMW's official website.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

How to reset the maintenance light on the Roewe i6?

Roewe i6 maintenance reset steps: 1. Turn on the ignition switch to power up the car; 2. During the OIL symbol display on the instrument cluster information display, press and hold the MODE button for more than 5 seconds; 3. After the OIL symbol starts flashing, quickly press the MODE button five or more times in succession; 4. After pressing the MODE button five times, the OIL symbol will flash three times and then turn off; 5. The maintenance light will go out, indicating that the reset is complete. The Roewe i6 is the first internet-connected sedan officially announced by Roewe. In terms of body dimensions, the Roewe i6 measures 4671mm in length, 1835mm in width, 1464mm in height, and has a wheelbase of 2715mm.
20
1
Share

How to Turn on the Low Beam Headlights of a Car?

Turning on the low beam headlights of a car: The vehicle's lighting combination switch comes in lever-style and knob-style, with a dedicated low beam position. For lever-style switches, move the lighting control lever to the low beam position to activate the low beams. For knob-style switches, rotate the knob clockwise to the low beam position to turn on the low beams. Low beams must be turned on in the following situations: 1. When driving in dark areas without streetlights, or during dusk when visibility is low or at dawn when light is just appearing; 2. During heavy fog, snow, or heavy rain, when visibility is obstructed, even during the day; 3. On certain roads where lighting is insufficient despite the presence of illumination. Note: To determine whether to turn on the low beams at dusk, check your rearview mirror. If the vehicle behind you starts to appear blurry in the mirror, it's time to turn on the low beams.
15
5
Share

How to align the timing of the Roewe 350?

The method to align the timing of the Roewe 350: Open the engine cover, there are two round holes on the camshaft that should be vertically upward. On the left side of the three-way catalytic converter, near the transmission position, there is a small hole about the size of a chopstick. Insert a sturdy iron rod into it. Turn the engine until the iron rod inserts into the small hole on the flywheel, then lock the camshaft with the two round holes vertically upward. The Roewe 350 is a compact sedan positioned in the A-segment market, launched by SAIC Motor following the Roewe 750 and Roewe 550. In terms of body dimensions, the Roewe 350 measures 4521mm in length, 1788mm in width, and 1492mm in height.
17
0
Share

What is the ground clearance of the RAV4?

The ground clearance of the RAV4 is 152mm. The vehicle is equipped with a CVT continuously variable transmission to provide power, and its minimum ground clearance height aligns with its positioning as an urban SUV, allowing it to adapt to most urban road conditions. The RAV4 is an SUV model under Toyota, available with either a 2.0-liter or a 2.5-liter engine. The car features a spacious interior, a multifunctional steering wheel, and a large LCD instrument panel, with a stylishly designed central control screen. In terms of dimensions, the RAV4 measures 4.265 meters in length, 1.785 meters in width, and 1.705 meters in height.
19
5
Share

What is the engine model of the Passat?

The Passat 2.0T engine model is EA888, with a maximum power of 162kW and a maximum torque of 350Nm. The 1.4T engine model is EA211, with a maximum power of 137kW and a maximum torque of 320Nm. The Passat engine belongs to FAW-Volkswagen Engine (Dalian) Co., Ltd. and is produced by the Dalian Powertrain Manufacturing Plant. For daily maintenance of the Passat engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional equipment of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the oil and filter. The quality of any lubricating oil will change during use. After a certain mileage, performance deteriorates, causing various problems for the engine. To avoid malfunctions, change the oil regularly according to usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication area, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. In small amounts, it remains suspended in the oil; in large amounts, it precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates properly but also extends the overall lifespan of the radiator and engine.
13
5
Share

How to Remove Snow from a Car?

Methods for clearing snow from a car's surface are as follows: 1. Loose Snow: Use a soft cloth or a gentle brush to lightly sweep it away. Always move in the same direction, and avoid activating the windshield wipers before removing the snow. 2. Thin Ice Layer Beneath Snow: Use a rubber scraper or a stiff glass scraper to gently scrape it off. It's best to scrape in one direction rather than back and forth. A snow remover can also be used to clear surface snow. 3. Frost and Ice Combination: Spray professional antifreeze windshield fluid onto the glass, then use a rubber scraper to remove the ice layer, which will usually slide off automatically. Alternatively, starting the vehicle and setting the air conditioning to hot air with the vent mode directed at the "windshield" setting can also easily remove the ice layer.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.