···
Log in / Register

Does the Bin Yue have a one-key start feature?

3 Answers
AbelDella
07/30/25 2:37am
The Bin Yue is equipped with a one-key start feature, which is part of the intelligent vehicle system. This button device simplifies the starting process and can also be used to turn off the engine. The dimensions of the Bin Yue are: length 4330mm, width 1800mm, height 1609mm, with a wheelbase of 2600mm and a fuel tank capacity of 45 liters. The Bin Yue is powered by a 1.4T turbocharged engine, delivering a maximum power of 104 kW and a maximum torque of 235 Nm. It is paired with a 6-speed manual transmission. The front suspension uses a MacPherson strut independent suspension, while the rear suspension employs a torsion beam non-independent suspension.
Was this review help?
6
4
Share
Arwen
08/16/25 8:50am
I've been driving the Geely Binyue for two years now, and this car indeed comes with a push-button start feature. The high-end version comes standard with one-key start. You just keep the key in your pocket, and it automatically unlocks the doors when you approach. Once inside, press the brake pedal and the start button to fire up the engine—super convenient. On cold winter mornings or rainy days, there's no need to fumble through your bag for the keyhole, saving both time and hassle. The one-key start system is also linked to the smart key, automatically locking the doors when you walk a few meters away, reducing security risks. The mid to low-end versions of the Binyue might not have this feature, so it's advisable to check the configuration sheet when choosing a model. Maintenance is simple too—the key battery needs replacing about once a year to avoid malfunctions. Overall, this feature makes daily commutes much easier and enhances the driving experience. If your budget allows, the high-end version is worth every penny.
Was this review help?
20
0
Share
Expand All
LaAxel
10/21/25 7:17am
Regarding the one-key start system of the Bin Yue, according to common configurations, it is installed in most high-end and some mid-range models. This is a keyless start technology where sensors inside the vehicle detect the key's position. After unlocking the door with the key in proximity and sitting inside, you can start the engine by pressing the button on the center console while stepping on the brake, eliminating the need to insert a key. This system utilizes RFID technology, enhancing operational convenience and vehicle security against theft. In the compact SUV segment, the Bin Yue's adoption of this feature demonstrates brand progress, being significantly more advanced than older models. Be sure to check the specific year and configuration, as lower trims may require installation as an add-on or optional feature. During use, avoid placing the key and mobile phone together to prevent signal interference, ensuring smooth startup. In the long run, it reduces the risk of misoperation and improves driving comfort.
Was this review help?
14
0
Share
Expand All
More Forum Discussions

Does CVT mean automatic transmission?

CVT stands for automatic transmission. Here is an introduction about CVT: 1. Introduction: CVT represents the vehicle's transmission, specifically a continuously variable transmission. The difference between this type of transmission and other automatic transmissions is that the gear ratio is not intermittent but continuous, making it one of many transmission types. 2. Types: The first type is the AT transmission, known as the hydraulic automatic transmission, which was an early form of automatic transmission and is still used in some models today. The second type is the CVT transmission, a mechanical continuously variable automatic transmission, commonly used in Japanese models. The third type is the AMT transmission, an early form of transmission. The fourth type is the dual-clutch transmission, which features two sets of clutches and was first adopted by German vehicles.
16
0
Share

What is the Discount for Flood-Damaged Cars?

Flood-damaged cars are generally sold at a 30% discount. Below is an introduction to the hazards of flood-damaged cars: 1. Electronic system malfunctions: The most vulnerable components in a car to water damage are the electronic systems. Although modern vehicles have waterproofing measures for electronic circuits, they cannot withstand heavy flooding or prolonged submersion. Once water submerges the engine compartment for an extended period, it can cause wire corrosion and short circuits. In minor cases, some electronic functions may fail, while in severe cases, it could lead to spontaneous combustion. 2. Engine failure: Generally, if a car's engine compartment has been submerged in water, do not attempt to start it. There is no guarantee whether water has entered the engine. If water has entered, a secondary start could result in a broken connecting rod in minor cases or complete engine failure in severe cases. In either scenario, the repair costs are extremely high, and the claims process is unlikely to be smooth.
10
1
Share

Does Rainy Weather Affect the Driving Test (Subject 2)?

Generally, rainy weather does not significantly impact the Subject 2 driving test. However, if the rain becomes heavy, it may affect visibility and make it difficult to accurately identify reference points. Below are some considerations for taking the Subject 2 test in rainy conditions: 1. The most crucial factor during a rainy test is maintaining the right mindset. If you encounter rain on the test day, avoid negative emotions or excessive nervousness. It would be a great pity if months of preparation were wasted due to anxiety. Therefore, candidates must adjust their mindset, stay optimistic, and not let the weather affect their performance. 2. Rain can blur the side mirrors, so candidates should wipe them clean before getting into the car to ensure clear visibility during the test. Additionally, shake off any mud or water from your shoes before entering the vehicle to prevent slipping on the pedals. Rainy conditions also increase the risk of wheel slippage. Hence, during the test, candidates should control their speed and drive slower than during regular practice sessions.
12
0
Share

What are the causes of a rich fuel mixture fault?

It may be caused by excessive carbon buildup on the throttle valve, which requires cleaning at a 4S shop to resolve the issue. Alternatively, it could be due to faults in the oxygen sensor, coolant temperature sensor, or intake pressure sensor. Here is an introduction to the automotive fuel system: Components: The automotive fuel system includes components such as the fuel tank, fuel pump, fuel damper, fuel pressure regulator, fuel filter, fuel injector, thermostat timing switch, and cold start valve (cold start injector). Carbon Buildup: Carbon deposits and sediments can clog the needle valve and valve holes of the fuel injector, affecting the performance of the precision components in the injection system, leading to poor fuel injection, inadequate atomization, and reduced power performance.
13
0
Share

What are the models of European single-girder cranes?

Here is an introduction to the models of European single-girder cranes: 1. Models: The main models of European single-girder cranes include the LDA-type electric single-girder crane, LD hoist single-girder crane, LDX-type European electric single-girder crane, LX-type electric single-girder suspension crane, SDXQ-type manual single-girder suspension crane, and single-girder grab crane. 2. European single-girder cranes: European single-girder cranes are characterized by their light weight, compact structure, and low energy consumption. European cranes adopt a unique design concept, featuring small dimensions, light weight, and low wheel pressure. Compared to traditional cranes, European cranes have the minimum hook-to-wall distance and the lowest clearance height, allowing them to work closer to the front, with higher lifting heights, effectively increasing the working space of existing workshops. Due to their light weight and low wheel pressure, new workshops can be designed smaller and with more comprehensive functions. Smaller workshops mean significant savings in initial construction investment, as well as long-term heating, air conditioning, and other maintenance costs.
18
5
Share

Is it better to buy a National V or National VI car?

If the region where you live has not implemented the National VI emission standard, you can purchase a National V car. If the region has already implemented the National VI emission standard, you need to buy a National VI car. However, it is recommended that car enthusiasts buy National VI cars because they can be driven for a longer time and can be sold at a higher price when resold. Below is an introduction to National VI: 1. Starting from 2019, many cities and regions across the country have gradually begun to implement the National VI emission standard. Initially, the National VI a standard was implemented, and it is expected that the National VI b standard will be implemented in 2023. 2. The introduction of new emission standards means that the country has a new set of technologies for vehicle annual inspections, and cars will also undergo corresponding technical upgrades.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.