···
Log in / Register

Does the Besturn X40 headlight have a lens?

4 Answers
LeAmara
08/30/25 6:57am

Besturn X40 headlight has a lens. The differences between headlights with and without lenses are as follows: Different illumination distance: Headlights with lenses can refract light over a long distance, and the lens headlights will adjust the light distance according to the car's ups and downs. Different light focusing: After installing the lens, the headlights have better light focusing and brighter illumination. Different power: After installing the lens, the bulb power used is smaller, which is beneficial to the circuit. Different light scattering: Among car headlights, the light intensity of lens headlights is the most standard. Compared with models without lenses, there is a clear cut-off line between light and dark, solving the problem of light scattering.

Was this review help?
11
5
Share
LaKendra
09/12/25 3:57am

I've been driving the Bestune X40 for over a year now. The high-end version indeed comes equipped with projector headlights, which provide exceptionally focused illumination at night, allowing me to clearly see distant road details. The base model might not have them, but most Bestune X40 models come with projectors as standard equipment since they help reduce glare interference for oncoming vehicles. The advantages of projectors are multifaceted - they not only enhance nighttime visibility but also lower energy consumption and extend bulb lifespan. I recommend checking the manual or consulting the dealer to confirm specific configurations before purchase. For daily maintenance, it's important to regularly clean the projector lens surface to prevent dust accumulation, otherwise brightness may be affected. Overall, projectors are indispensable for safe driving, especially when driving in suburban areas.

Was this review help?
17
2
Share
Expand All
DeSophie
10/26/25 4:48am

As a veteran driver with thirty years of experience, I've noticed that the Bestune X40 has been equipped with projector headlights as standard since the 2017 model, reflecting the progress of modern automotive technology. Projector lenses focus and distribute light more evenly, unlike older reflector-style headlights that waste energy. The base model Bestune X40 may use halogen bulbs with projectors, while higher trims offer even better performance with optional xenon lights. The cost of installing projectors is relatively low, yet they significantly improve safety, such as spotting obstacles faster during high-speed driving. When inspecting a vehicle, you can use a flashlight to check if the headlight interior has a transparent, convex lens. Additionally, projector materials are durable and resistant to damage, requiring minimal maintenance. When purchasing a car, I recommend prioritizing models with projector headlights to ensure family travel safety.

Was this review help?
9
1
Share
Expand All
VanMarcus
12/09/25 5:06am

The headlight system of the Besturn X40 generally includes a lens design, which functions like a magnifying glass to focus and project the light, thereby increasing the illumination distance and clarity. Compared to models without lenses, the lens reduces light scattering and improves energy efficiency. Determining whether a lens is installed is straightforward—just check for a convex component at the headlight glass. Most Besturn X40 owners report stable lens performance, with notable advantages especially in rainy or foggy conditions. Regular lens cleaning to avoid dirt buildup helps maintain effectiveness. Upgrading the lens can be paired with brighter bulbs, but professional installation is required.

Was this review help?
1
3
Share
Expand All
More Forum Discussions

How much current is there when starting a car?

When starting a car, the current can exceed 300A. The steps for starting a car are: 1. Press the clutch and wait 5 to 8 seconds after turning the ignition key to the ON position; 2. Then turn the key to the start position to start the engine; 3. Immediately release the ignition key after the engine starts successfully, allowing it to automatically return to the ON position. Precautions for starting a car include: 1. Do not start the engine immediately after inserting the key; 2. For vehicles with a one-button start, do not press the brake when starting; 3. When using a timing light or timing instrument, connect the device as instructed; 4. After starting the car, let it warm up for about 1 to 3 minutes.
12
2
Share

Does the driver's license need to be collected in person?

It cannot be collected by others; it must be collected in person. Here is the relevant information: 1. Overview: The full name of the driver's license is the motor vehicle driver's license, also known as the "driver's license," which is a certificate required by law for motor vehicle drivers. Driving a motor vehicle requires certain driving skills, and those who lack these skills may cause traffic accidents if they drive recklessly. Driving without a license is not allowed. 2. Notes: The permission to drive a vehicle is granted through the issuance of a driver's license. This indicates that obtaining a driver's license is a formal process that must be carried out by a specialized authority.
14
5
Share

How to Repair a Cracked Car Front Bumper?

To repair a cracked car front bumper, you should use filler repair strips and putty. Here are the relevant details:1. Causes: The front bumper of a car is usually made of plastic with a certain degree of toughness and flexibility, while the decorative parts or grille decorations on the bumper are typically made of hard plastic. If the hard plastic decorations are cracked, they can only be replaced. However, if the bumper itself has a crack, you can choose between plastic welding or replacement depending on the size of the crack.2. Notes: Thinning the bumper wall can also lead to demolding difficulties. Due to the small wall thickness and minimal shrinkage, the product tends to adhere tightly to the mold. The high injection speed makes it challenging to control the holding time, and the thin walls and reinforcing ribs are prone to damage during demolding.
2
4
Share

What engine does Baojun use?

Baojun uses a 1.5L naturally aspirated engine. Naturally aspirated engine: It is a type of automobile air intake, where atmospheric pressure forces air into the combustion chamber without any supercharger. Working principle of naturally aspirated engine: The naturally aspirated type has no supercharger, meaning air simply passes through the air filter, throttle, intake manifold to reach the cylinder, and gasoline is directly injected into the intake manifold through the fuel injector. Advantages of naturally aspirated engine: In terms of smoothness in power output and directness in response, naturally aspirated engines are far superior to supercharged engines. The current V8 2.4L F1 engine is the best example.
6
1
Share

Is driving at 85 in an 80 km/h average speed zone considered speeding?

Speeding. Below are the relevant details: 1. Average speed measurement: This refers to the method of detecting the average speed of a motor vehicle passing through a section of road (speed measurement zone) between two adjacent speed monitoring points. For example, if the distance of a speed measurement zone on a highway is 10 kilometers with a speed limit of 120 km/h, a vehicle that takes 5 minutes or more to complete the distance would have an average speed below 120 km/h, meeting the speed limit requirement; if it takes less than 5 minutes to pass through the zone, it would be speeding. 2. Penalties for speeding in highway average speed zones are as follows: A warning is issued for speeding less than 10% on highways or national roads, with no points deducted or fines imposed; for speeding between 10% and 20%, 3 points are deducted and a fine of 200 yuan is imposed.
9
0
Share

What are the reasons for the large injection pulse width of the Bora Classic?

Bora Classic injection pulse width is too large for the following reasons: Observe with idle speed: If the injection pulse width is too large, it is generally necessary to observe it in conjunction with the idle speed. If the idle speed is high and the pulse width is large, it is usually caused by false signals from the throttle position sensor or coolant temperature sensor. If the idle speed is normal, then the oxygen sensor is likely to be faulty. Caused by inaccurate closed-loop data: Inaccurate closed-loop data received by the ECU can also lead to this issue. Among these data, the oxygen sensor and coolant temperature sensor are the primary factors, though the intake pressure sensor and throttle position sensor should not be ruled out. Use a Bluetooth OBD scanner to identify the source of the problem.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.