Does the Bestune T99 come with a built-in dash cam?

How to Solve the Popping Sound in the Mondeo Fuel Tank?

To solve the popping sound in the Mondeo fuel tank: 1. Check if the carbon canister is clogged, causing excessive negative pressure in the fuel tank, and clean the carbon canister; 2. Replace the carbon canister. Taking the 2020 Ford Mondeo as an example, it is a mid-size car with body dimensions of 4873mm in length, 1852mm in width, and 1470mm in height, with a wheelbase of 2850mm and a curb weight of 1592kg. The 2020 Ford Mondeo is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 182PS, a maximum torque of 243Nm, and a maximum power of 134kW, paired with a 6-speed automatic transmission.

3

Share

What is the reason for the buzzing noise when driving a Peugeot 3008?

The reason for the buzzing noise when driving a Peugeot 3008 is a faulty front wheel half-shaft. The Peugeot 3008 is a compact SUV. Taking the 2019 Peugeot 3008 as an example, its body dimensions are: length 4435mm, width 1840mm, height 1652mm, with a wheelbase of 2613mm. The 2019 Peugeot 3008 is equipped with a 1.6T turbocharged engine, with a maximum horsepower of 167PS, maximum torque of 245Nm, maximum power of 123kW, and is paired with a 6-speed manual/automatic transmission.

14

3

Share

How to align the timing belt on a Roewe 550?

Roewe 550 timing belt alignment method is: Use a wheel block to secure the timing wheel of the engine to prevent the wheel from turning during chain tooth alignment; Locate the blue timing chain tooth on the engine camshaft; Align the colored chain on the engine with the small dot on the camshaft; After marking, use a wrench to clamp the timing shaft so that the marked chain tooth can be secured; Release the clip holding the engine timing wheel, and the timing alignment is complete. Taking the 2014 manual Zhi Xuan edition Roewe 550 as an example, its body dimensions are: length 4648mm, width 1827mm, height 1483mm, with a wheelbase of 2750mm.

12

2

Share

What is the difference between BYD Tang DM and DMI?

The differences between BYD Tang DM and DMI are: 1. Different powertrains: BYD Tang DM is equipped with a 2.0T plug-in hybrid system, while BYD Tang DMI is equipped with a 1.5T plug-in hybrid system. 2. Different motors: BYD Tang DM uses ternary lithium batteries, while BYD Tang DMI uses lithium iron phosphate batteries. Taking the 2021 BYD Tang as an example, its front suspension is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension. It is equipped with a 2.0L turbocharged engine with a maximum horsepower of 230PS, a maximum torque of 350Nm, and a maximum power of 169kW, paired with a 6-speed automatic transmission.

5

3

Share

What Causes Transmission Shaking?

Transmission shaking can be caused by: 1. Excessive carbon buildup; 2. Dirty throttle body or air filter; 3. Faulty spark plugs; 4. Aging engine components. The functions of a transmission are: 1. To change the gear ratio to meet different driving conditions' traction requirements; 2. To enable reverse driving; 3. To interrupt power transmission to the drive wheels during engine start, idle operation, gear shifting, or when power output is needed while parking. Transmission maintenance methods include: 1. Regularly checking the fluid level; 2. Avoiding skipping gears when upshifting; 3. Not forcing the transmission into neutral; 4. Not shortening the idle warm-up time; 5. Avoiding gear grinding when shifting.

6

3

Share

What is the use of ECU?

ECU (Electronic-Control-Unit) is an electronic control unit, also known as the "on-board computer" or "vehicle computer". In terms of its purpose, it serves as a dedicated microcomputer controller for automobiles. Below is relevant information about ECU: 1. The main component of ECU is a microcomputer, with the CPU being its core element. The ECU converts input signals into digital form, processes them by comparing with stored reference data, calculates output values, and then amplifies the output signals to control various regulating servo components such as relays and switches. 2. Essentially, an ECU is an "Electronic Control Unit", composed of three parts: an input circuit, a microcomputer, and an output circuit. The input circuit receives signals from sensors and other devices, filters, processes, and amplifies these signals, then converts them into input levels of specific voltages.

9

5

Share

Does the Bestune T99 come with a built-in dash cam?

How to Solve the Popping Sound in the Mondeo Fuel Tank?

What is the reason for the buzzing noise when driving a Peugeot 3008?

How to align the timing belt on a Roewe 550?

What is the difference between BYD Tang DM and DMI?

What Causes Transmission Shaking?

What is the use of ECU?

Does Insurance Need to Be Transferred When Transferring Vehicle Ownership?

Where is the driver-side airbag located?

What are the reasons why a motorcycle has electricity and fuel but won't start?

What Are the Effects of Not Changing the Air Filter for Two Years?