Does the Benben E-Star National Edition have airbags?

1 Answers
DeSebastian
07/29/25 11:17pm
The Benben E-Star National Edition can be equipped with airbags. Meaning of airbags: The electronic-control-of-safety-airbag system is a passive safety (see vehicle safety performance) protection system. When used in conjunction with seat belts, it can provide effective collision protection for occupants. In the event of a car collision, car airbags can reduce head injuries by 25% and facial injuries by approximately 80%. Composition of airbags: Mainly consists of airbag sensors, collision airbags, and electronic control devices. The driver-side collision airbag is installed in the steering wheel; the passenger-side collision airbag is generally installed on the dashboard. Airbag sensors are installed on the left, right, and middle of the cabin partition; the middle airbag sensor and airbag system are installed together with the electronic control device. The airbag assembly mainly consists of the airbag, gas generator, and igniter. The electronic control device is used for data collection and processing, diagnosing the reliability of the airbag, ensuring that the ignition signal is issued in time when the preset value is reached, and ensuring that the gas generator has sufficient driving current for timely ignition.
Was this review help?
1
2
Share
More Forum Discussions

Should the 10th Generation Accord use 92 or 95 octane fuel?

10th Generation Accord can use both 92 and 95 octane fuel, as it requires unleaded gasoline with an octane rating of 92 or higher. Taking the 2018 10th Generation Accord as an example, it is a mid-size car with the following dimensions: length 4893mm, width 1862mm, height 1449mm, wheelbase 2830mm, fuel tank capacity 48.5L, and curb weight 1548kg. The 2018 10th Generation Accord features a MacPherson strut front suspension and a multi-link rear suspension. It is equipped with a 2.0L naturally aspirated engine, producing a maximum horsepower of 146PS, maximum power of 107kW, and maximum torque of 175Nm, paired with a continuously variable transmission.
7
1
Share

What to Do If the Vehicle's Registration Transfer Fails?

Must replace the license plate and vehicle registration certificate. The specific steps are as follows: 1. Processing at two authorities: When a vehicle is transferred from one city to another, it requires changing the affiliated vehicle management authority for registration. Vehicle registration transfer necessitates replacing the license plate and vehicle registration certificate, and the procedures must be completed at two vehicle management authorities, including the transfer-out procedure and the transfer-in procedure. 2. Filing with the industrial and commercial department: Both the buyer and the seller need to sign the "Used Motor Vehicle Sales Contract" supervised by the industrial and commercial department. The contract is made in triplicate, with one copy for each party and one retained by the industrial and commercial department. Only after filing with the industrial and commercial department can the vehicle transfer or registration transfer procedures be processed. Once the evaluation report is issued, the transfer procedures can begin. The processed transfer certificate should be kept by the buyer, and the seller is advised to retain a copy for future reference.
6
4
Share

How Many Categories of Driver's Licenses Are There?

Driver's licenses are divided into 16 categories, which are: A1, A2, A3, B1, B2, C1, C2, C3, C4, C5, D, E, F, M, N, P. The detailed explanation is as follows: The Ministry of Public Security has further subdivided the three types of permitted driving vehicles currently endorsed on driver's licenses—namely, Class A (large passenger vehicles), Class B (large trucks), and Class C (small cars)—into seven categories to enhance the specificity of management, based on the driving difficulty and safety requirements of different vehicle types. The sequence of vehicle types that motor vehicle drivers are permitted to drive is as follows: large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, large trucks, small cars, small automatic transmission cars, low-speed cargo vehicles, three-wheeled cars, small automatic transmission passenger vehicles for the disabled, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams.
20
0
Share

What Causes Car Acceleration Shaking?

The reasons for car shaking during rapid acceleration are as follows: 1. If the car engine shakes severely during driving and sometimes fails to start, it may be due to a dirty throttle body or excessive carbon deposits in the fuel injectors and intake passages. 2. In cold conditions, carbon deposits can absorb some fuel. If the fuel does not completely enter the cylinder for combustion, it can cause unstable idling and difficulty starting. 3. When driving at high speeds to a certain speed, the steering wheel may experience noticeable shaking or vibration, but this is not obvious at low speeds. In fact, there are many potential causes of engine shaking. Here, we first need to rule out abnormal shaking caused by engine faults, as engine issues typically also manifest at low speeds.
20
5
Share

Is it necessary to apply a paint protection film?

It is necessary to apply a paint protection film. Here is some extended information about paint protection films: 1. Introduction: A paint protection film is a high-performance, environmentally friendly new type of film widely used in the automotive beauty and maintenance industry. It is commonly known as a transparent paint protection film. 2. Materials: There are generally two main types: PVC and TPU. The former material results in a thicker and harder protective film with poor flexibility, making it difficult to apply with a wrap-around treatment. It primarily relies on hardness to protect the car paint and is relatively cheaper. On the other hand, TPU-based protective films are softer, with excellent flexibility and stretchability, relying on high-strength resilience to protect the car paint. Additionally, this material has some self-healing capabilities for minor scratches, which makes it more expensive. There is also a PU material, similar in function to TPU but lacking the self-healing ability.
16
1
Share

What is the reason for the blue light on the Vezel dashboard?

The blue light on the Vezel dashboard indicates that the vehicle's water temperature is too low, which can affect the safety of normal driving. At this time, you only need to drive gently, and the blue light will turn off once the water temperature rises. Relevant information about the car dashboard is as follows: 1. Introduction: The instrument panel, or instrument-panel, is a rigid flat plate or structural component used to install instruments and related devices. It can be classified by type into screen-type instrument panels, frame-type instrument panels, channel-type instrument panels, and cabinet-type instrument panels. 2. Function: The instrument panel can be equipped with external lighting and can also be attached to a control console. It comes in various forms and specifications, allowing for the installation of various instruments as needed, and can also combine various instrument panels into a single unit as required.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.