Does the Beijing X7 use a Mercedes-Benz engine?

1 Answers
SanAngelo
07/29/25 11:55pm
The engine used in the Beijing X7 is not a Mercedes-Benz engine. It is independently developed by Tongling Ruizhan, a subsidiary of the Tieniu Group, and is domestically produced. The engine model used in the Beijing X7 is the A156T1H, with a maximum horsepower of 188, a maximum power of 138KW, a maximum power speed of 5500rpm, and a maximum torque of 275 Nm. For daily maintenance of the Beijing X7's engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to the mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the oil and filter. The quality of any lubricating oil will change during use. After a certain mileage, performance deteriorates, causing various problems for the engine. To avoid faults, change the oil regularly based on usage conditions and keep the oil volume moderate. When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through the filter element, it will either burst the filter element or open the safety valve, bypassing the filter and bringing contaminants back to the lubrication area, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from part wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging the filter and oil holes, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
Was this review help?
19
1
Share
More Forum Discussions

What are the body dimensions of the Huansu S7?

The body dimensions of the Huansu S7 are: length 4800 mm, width 1850 mm, height 1770 mm, with a wheelbase of 2780 mm. It is a mid-size 5-door 7-seat SUV under BAIC Yinxiang, with a fuel tank capacity of 50L and tire specifications of 225/60R17. The Huansu S7 is equipped with a 1.5T turbocharged engine and an 8-speed automatic transmission, delivering a maximum power of 110 kW and a maximum torque of 220 Nm. It features front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension using multi-link independent suspension.
19
3
Share

What brand is the Leopard sedan?

Leopard is a domestic brand. Taking the 2019 Leopard CS10 automatic driving version as an example, it is a compact 5-door, 5-seat SUV with body dimensions of 4663mm in length, 1875mm in width, and 1700mm in height, a wheelbase of 2700mm, and a fuel tank capacity of 60 liters. The 2019 Leopard CS10 automatic driving version is equipped with a 2.0T turbocharged engine and a 6-speed dual-clutch transmission, delivering a maximum power of 130 kW and a maximum torque of 250 Nm. It features front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension using multi-link independent suspension.
8
0
Share

Where is the car first aid kit?

Car first aid kit is located in the trunk. The kit includes: triangular bandage, elastic head cover, emergency blanket, buckle-type tourniquet, medical gloves, hemostatic pad, disposable instant cold pack, band-aid, iodine swab, isolation mask, motion sickness medicine, gauze, as well as warning triangle and tire changing tools. The car first aid kit is a package of medical emergency equipment and medicines equipped on the vehicle, which can be used for self-rescue in case of casualties caused by traffic accidents, effectively reducing traffic fatalities. Things to pay attention to after a car accident: 1. Don't panic, stay calm; 2. Perform self-rescue immediately and call emergency services; 3. Cut off the vehicle's power supply; 4. Protect the scene.
12
2
Share

What to Do If the Seat Belt Buckle Spring is Broken?

Seat belt buckle spring is broken, the solution is: find a professional to replace it. A broken spring will cause the car seat belt buckle to loosen, reducing the protective performance of the seat belt. The correct way to use a seat belt is: 1. Pull out the seat belt and fasten the buckle plate to the buckle to ensure the seat belt secures the body; 2. Adjust the waist belt position so that the seat belt rests on the hips; 3. Adjust the shoulder belt position so that it crosses diagonally over the collarbone; 4. Before driving, check if the seat belt is secure to ensure its performance is normal; 5. Hold the buckle plate, press the release button to retract the seat belt into the retractor, and place the buckle plate in the storage position.
6
4
Share

How to Adjust the Center Rearview Mirror?

The method to adjust the center rearview mirror is: 1. Align the left edge of the mirror precisely to the right ear of the image in the mirror; 2. For adjusting the vertical position, place the distant horizon at the center of the mirror. The rearview mirrors are located on the left and right sides of the car's front and inside the car, allowing the driver to indirectly see the position clearly and expand the driver's field of vision. The methods to adjust other rearview mirrors are: 1. Adjust the left rearview mirror: For the top and bottom positions, place the distant horizon at the center; for the left and right positions, adjust until the car body occupies one-fourth of the mirror's area; 2. Adjust the right rearview mirror: Place the horizon at two-thirds of the rearview mirror's height, then adjust the car's edge to occupy one-fourth of the mirror's image.
18
0
Share

What are the differences between Porsche 718 and Porsche 911?

The differences between Porsche 718 and 911 are: 1. Different body structures: The Porsche 718 is a 2-door, 2-seater soft-top convertible; the Porsche 911 is a 2-door, 4-seater hard-top sports car. 2. Different power systems: The Porsche 718 is equipped with a 2.5T turbocharged engine and a 7-speed dual-clutch transmission; the Porsche 911 is equipped with a 3.0T twin-turbocharged engine and an 8-speed dual-clutch transmission. 3. Different body dimensions: The Porsche 718 measures 4379mm in length, 1801mm in width, 1272mm in height, with a wheelbase of 2475mm; the Porsche 911 measures 4519mm in length, 1852mm in width, 1298mm in height, with a wheelbase of 2450mm. 4. Different drive systems: The Porsche 718 features a mid-engine, rear-wheel drive layout; the Porsche 911 features a rear-engine, rear-wheel drive layout.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.