Does the Baojun 730 have an automatic transmission?

2 Answers
DiCollin
07/28/25 9:47pm
Baojun 730 has an automatic transmission. An automatic transmission means that the driver does not need to manually shift gears, as the vehicle will automatically select the appropriate gear based on the driving speed and traffic conditions. Precautions for shifting gears in an automatic transmission: 1. Do not press the accelerator pedal when shifting gears; 2. Do not immediately press the accelerator pedal hard after shifting into gear; 3. The vehicle can only be started in P or N gear; 4. To remove the gear lever from P gear, the brake must be pressed; 5. Do not shift into N gear while driving to coast; 6. Do not push into P gear while the vehicle is moving; 7. When changing the direction of travel, switching between D and R gears must be done after the vehicle has come to a complete stop; 8. Placing the gear in N while driving prevents the oil pump from supplying oil normally for lubrication, which can cause the internal components of the transmission to overheat and become damaged.
Was this review help?
1
4
Share
LeMalia
08/12/25 2:22am
I discovered that the Baojun 730 does indeed have an automatic transmission version, especially in recent models like the 2020 edition which comes with a CVT gearbox. As someone who frequently uses cars, I experienced the convenience it offers during a test drive at the dealership—no more constant clutch pressing in city traffic, and long drives no longer tire my legs. This design is perfect for family use, with its spacious interior making family trips more comfortable, and even novice drivers can quickly get the hang of it. Although the automatic version consumes slightly more fuel than the manual, it offers much more ease during daily commutes. For purchasing advice, opt for newer models and double-check the specifications to avoid ending up with an older manual version. Overall, it offers high value for money with a noticeably improved driving experience.
Was this review help?
7
2
Share
Expand All
More Forum Discussions

What are the length, width, and height of the BMW 530?

The standard wheelbase version of the BMW 530 has dimensions of 4954 mm in length, 1868 mm in width, and 1489 mm in height, with a wheelbase of 2975 mm. The long wheelbase version of the BMW 530 measures 5087 mm in length, 1868 mm in width, and 1500 mm in height, with a wheelbase of 3108 mm. Below are some relevant details about the BMW 530: 1. Drive type: Rear-wheel drive. 2. Top speed (km/h): 245. 3. Fuel consumption (L/100km): 9.9. 4. Transmission type: Steptronic six-speed automatic transmission. 5. Suspension: Double-joint spring strut front axle, aluminum integral rear axle. 6. Brake system type: Front and rear disc brakes. 7. Steering system type: Power steering.
1
1
Share

How to Determine if a Car Has Been in an Accident

Observe whether the gaps between the body panels are even and consistent, and check if the side body lines are smooth. Pay attention to the factory weld marks at the junctions of the A, B, and C pillars with the car body. Lift the vehicle and inspect the chassis, front longitudinal beams, and rear longitudinal beams. Examine the overall cleanliness of the engine compartment.
17
4
Share

What Causes Noise When Braking?

Possible situations when there is noise during braking include: 1. When starting a cold car, there is a screeching sound when braking. This often occurs in the morning, especially in winter mornings, when there is moisture on the brake discs. The sound is particularly noticeable when starting to drive, but it disappears after driving for a while as the moisture evaporates. In this case, there is no need to worry about any brake issues. 2. A "clanging" sound when braking. This may be caused by small stones getting into the hollow part of the brake disc, resulting in a regular knocking sound when the vehicle is moving. Simply remove the tire and take out the small stones or foreign objects. 3. A metal-on-metal grinding sound when braking. This is mainly due to the brake pads wearing down to the safety line, a problem that many drivers easily overlook. Initially, the sound is very small, but as it gradually becomes louder, the brake pads will wear out completely, and eventually, the braking effect will rely solely on the metal of the brake pads and the brake disc. At this point, the brake pads and brake disc need to be replaced. 4. A "clicking" sound when braking. In most cases, this is caused by the driver slamming on the brakes at high speed, triggering the vehicle's ABS function to prevent accidents caused by locking the brakes. 5. A "pop" sound when starting the vehicle after releasing the handbrake. This is mainly because the brake disc is made of cast iron, and the brake pads also contain iron components. When the brake disc rusts, it may stick to the brake pads. In this case, simply pressing the accelerator slightly and then releasing it will resolve the issue, and there is no need to worry about any brake problems. 6. A sound when lightly braking with newly replaced brake pads. There are two main reasons for this. One is severe wear on the brake disc, causing the brake pads and brake disc to not fully contact, resulting in uneven wear and noise. The other is that the selected brake pads are not the silent type. In this case, simply choosing ceramic-type brake pads will solve the problem.
15
2
Share

How to Determine the Year of a Car by Its Glass?

How to determine the year of a car by its glass? When inspecting a car, the date on the glass can generally be categorized into the following three types, along with certain special vehicle models: 1. Number + Dot Date Reading Method The number represents the year. If the dots are in front of the number, the date is in the first half of the year, and you subtract the number of dots from 7. If the dots are behind the number, the date is in the second half of the year, and you subtract the number of dots from 13. Example: The car's manufacturing date is October 2014, and the glass date is ····3. Calculation: Dots are in front, 3 represents 2013, and there are 4 dots before the 3. Subtract 3 from 7 to get 4. Production date: April 2013. 2. Number + Small Dots + Large Dots Date Reading Method The number represents the year. Small dots represent the quarter (maximum of 4, as there are 4 quarters in a year). Large dots represent the month within the quarter (maximum of 3). Example: The car's manufacturing date is November 2017, and the glass date is 7······. Calculation: The number 7 represents 2017, 4 small dots represent the fourth quarter, and the 2 large dots represent the second month of the quarter. Production date: November 2017. 3. First Line: Number + Small Dots, Second Line: Large Dots + Small Dots Date Reading Method The number represents the year of glass production. Small dots in the first line represent the month (minimum 1 dot, maximum 12 dots). The second line represents the days in the month, with large dots representing 10 days and small dots representing 1 day. Example: The car's manufacturing date is August 23, 2009, and the glass date is 9··········. Calculation: 9 represents 2009, 8 small dots in the first line represent August, 2 large dots in the second line represent 20 days, and 3 small dots represent 3 days. Production date: August 23, 2009. 4. BMW car glass is a bit special, as it does not have numbers or dates, only batch numbers. Determining the date of BMW glass requires experience.
2
1
Share

Automobile Formaldehyde Treatment Process?

Wear protective masks, gloves, and work clothes; clean the interior of the car thoroughly, and remove all interior items such as floor mats, seat cushions, trunk mats, pillows, and seat covers. The construction process follows the principle of from top to bottom and from front to back. Different materials are treated differently. Use formaldehyde remover on car interiors and accessories to dissolve chemical pollutants deeply inside and sterilize and deodorize. Perform formaldehyde removal treatment on interior items such as floor mats and seat cushions. Maintain good ventilation, and after complete drying, perform a second spraying on the car and interior items.
7
5
Share

How to Check How Much Engine Oil is Left in the Car?

Methods to check how much engine oil is left in the car: 1. The oil dipstick is usually located next to the engine, either on top or on the side. A distinctive feature of the dipstick is that it has a pull ring, making it easy to identify. 2. Pull out the dipstick and use a tissue to completely wipe off the oil at the tip of the dipstick. Also, take note of the position of the dipstick's scale (usually marked with MIN and MAX indicators). 3. Reinsert the cleaned dipstick all the way in, then pull it out again. Observe the oil on the tip of the dipstick to determine if the measurement is appropriate. If the oil level is between the MIN and MAX marks, the measurement is optimal. Additional Information: In automobiles, the dipstick is a commonly used tool to check the quantity of lubricating oil in the reservoir. Due to the curved path of the dipstick insertion hole, the dipstick must be able to deform when inserted and return to its original shape when pulled out. The function of the oil dipstick is not only to check the level of engine lubricating oil. Experienced drivers or mechanics can detect many operational dynamics of the engine by inspecting the dipstick. This allows for timely engine maintenance, early detection of faults or causes of issues, and prevention of further deterioration of problems.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.