Does the Baojun 310 Have Airbags?

Can the spare tire be left out of the car?

The spare tire can be left out of the car, but if the car has a flat tire while driving outside, you can only call for help, which is quite troublesome. Precautions for using a spare tire: Spare tires should not be used for a long time: Generally, the spare tires of most car models travel with the car for a long time, and the tire treads do not wear out, so the friction level is definitely different from that of regular tires. Long-term use can easily cause hazards such as vehicle deviation and uneven friction with surrounding tires. The color of spare tires is usually bright, which is also to remind the owner not to use the spare tire for a long time. Spare tires have speed limits during driving: Some car spare tires are limited to 80 kilometers per hour; some car spare tires are limited to 60 kilometers per hour. Therefore, when using a spare tire, be sure not to exceed the maximum speed limit of the tire. Spare tires should not be used for the front wheels: Spare tires are generally used to replace the rear wheels. If the front wheel fails, it is best to move the rear wheel to the front and then replace the spare tire on the rear wheel. This is because the front wheel is more likely to bear weight and has greater friction when encountering obstacles, increasing the probability of a flat tire. Replacing the spare tire on the rear wheel can increase safety to some extent.

11

0

Share

What Causes the Engine Malfunction Light to Flicker Violently?

When the engine malfunction light is on accompanied by noticeable vehicle vibration, the primary cause is poor combustion of the air-fuel mixture. This incomplete combustion leads to carbon buildup in the engine - the most significant contributor to vehicle shaking. Simultaneously, when the oxygen sensor detects this poor combustion and reports it to the ECU, the system illuminates the warning light. This explains why engine warning lights and vibrations often occur together. Several components can cause poor air-fuel mixture combustion including faulty spark plugs, defective ignition coils, malfunctioning fuel pumps, or clogged fuel lines. When the engine warning light activates, follow these steps: First, observe whether the engine is operating normally. Check for symptoms like vibrations, black smoke emissions, or difficulty starting. If present, avoid restarting the engine. Important note: Never restart if the red warning light is illuminated. If the engine runs normally and the vehicle is drivable, proceed to a service station promptly. Technicians can easily retrieve trouble codes using a portable diagnostic tool to identify and address specific issues. For normally functioning engines, owners may attempt gently reseating all wiring harness connectors (as loose connections could be the culprit) or repeatedly turning the ignition to ON position to potentially reset the system.

4

Share

Which is better, SP or SN grade engine oil?

Whether it is SP or SN grade engine oil, they are both API certified standards. Although the best choice is the oil that best suits your vehicle, SN grade oil is the latest standard introduced. Theoretically, SP grade oil is better than SN grade oil, with superior performance. Here is some information about API: 1. API grades are as follows: There are currently 13 types of S-series engine oils, namely SA, SB, SC, SD, SE, SF, SG, SH, SJ, SL, SM, SN, and SP. According to the alphabetical order, the oil represented by a later letter is superior to that represented by an earlier letter. 2. API certification standards: API is the abbreviation for the American Petroleum Institute, which is responsible for setting standards. Engine oils that meet API certification standards will bear the API certification mark.

4

Share

What is the function of car front fog lights?

Here is an introduction to the functions of car front fog lights: 1. In foggy or rainy conditions where visibility is significantly affected by weather, they allow other vehicles to see your car. 2. Installed at the front of the car, slightly lower than the headlights, they are used to illuminate the road during rainy or foggy weather. 3. They can improve the visibility for the driver and other traffic participants, enabling oncoming vehicles and pedestrians to spot each other from a greater distance. Here are the operation methods for turning on the front and rear fog lights: 1. Lever-operated type: The fog lights are activated by rotating the switch on the lever. When the button marked with the fog light symbol is turned to the ON position, the front fog lights turn on. Then, turning the button downward to the rear fog light position activates both the front and rear fog lights simultaneously. 2. Button-operated type: For models where the front and rear fog lights are turned on via buttons, there are fog light buttons near the dashboard or center console. Pressing the front and rear fog light buttons respectively will illuminate the front and rear fog lights.

1

4

Share

What is the function of tire hairs?

The function of tire hairs is to test the quality of the tire rubber by pulling them. Below is relevant information about tire hairs: 1. If they can be stretched long and are difficult to break, it indicates good rubber quality. Otherwise, it suggests poor rubber quality or expired products. 2. Tire hairs are formed during the vulcanization process of tires, where liquid rubber flows into the vent holes of the tire mold and hardens. Related information: 1. Tire hairs mainly occur when the vehicle is driven at high speeds, causing the tires to rotate rapidly. 2. The air inside the tire treads is compressed and then released, creating continuous "compression-release" noise. 3. The faster the speed and the heavier the vehicle, the louder the noise. At high speeds, the effect of tire hairs is negligible, so they do not increase tire noise.

4

Share

What Causes the Inability to Add Refrigerant to a Car's Air Conditioning System?

Car air conditioning systems may fail to accept refrigerant primarily due to compressor malfunction or excessive internal pipeline pressure, preventing refrigerant injection. In such cases, it's necessary to visit a 4S dealership for diagnostics to pinpoint and repair the specific fault. Additional details regarding car AC refrigerant recharge are as follows: 1. Procedure for adding refrigerant: Begin with pressure testing, followed by pressure retention checks. Upon confirming no leaks and stable pressure, proceed with vacuum extraction before refrigerant charging. 2. Precautions during refrigerant charging: Always start the vehicle and activate the AC system before charging. Refrigerant should typically be introduced through the low-pressure port while ensuring the high-pressure gauge connection remains securely tightened.

16

3

Share

Does the Baojun 310 Have Airbags?

Can the spare tire be left out of the car?

What Causes the Engine Malfunction Light to Flicker Violently?

Which is better, SP or SN grade engine oil?

What is the function of car front fog lights?

What is the function of tire hairs?

What Causes the Inability to Add Refrigerant to a Car's Air Conditioning System?

What does the M+- in an automatic transmission mean?

What are the differences between 235T and 270T?

What is the solution for flooded spark plugs in fuel-injected vehicles?

What are the effects of not installing an air conditioning filter in a car?