Does the Baojun 310 Have Airbags?

2 Answers
Shelby
07/28/25 9:03pm
Baojun 310 is equipped with airbags. The base models of this vehicle only feature a driver-side airbag, while the higher-end models include both driver and front passenger airbags. Modern airbag systems consist of collision sensors, cushioning airbags, gas generators, and control modules. Precautions for using airbags: Airbags must be used in conjunction with seat belts: Failure to fasten the seat belt may result in severe injuries or even death during a collision, even if airbags are present. Avoid placing objects in front of, above, or near the airbags: Be cautious not to place objects in front of, above, or near the airbags, as these items may obstruct airbag deployment or be propelled during an emergency, leading to additional hazards. Avoid high temperatures: Components of the airbag system should be stored properly. Do not expose airbag components to prolonged high-temperature environments exceeding 85 degrees Celsius. Do not modify the airbag system without authorization: Unauthorized alterations to the system's wiring and components are prohibited. Avoid making arbitrary changes to the bumper and front structure of the vehicle.
Was this review help?
19
5
Share
LorenzoFitz
08/12/25 1:44am
I've been driving the Baojun 310 for a while and need to talk about airbags. From my experience, the Baojun 310's configurations aren't uniform—the base model might not come with airbags, but higher trims like the AMT version usually have at least a single airbag. I didn't pay attention to this when I bought the car, but later a friend reminded me how crucial airbags are, especially in frontal collisions where they cushion the impact and protect your head. I suggest checking the vehicle's configuration sheet or asking the dealer before buying—don't compromise on safety. If the car lacks airbags, make sure to fasten your seatbelt properly. Driving slowly in the city might be manageable, but the risks are much higher on highways. Also, if you're on a budget, consider checking out configurations of similar models like the Chery Fengyun 2—always prioritize safety when choosing a car.
Was this review help?
4
4
Share
Expand All
More Forum Discussions

Where is the radar controller of the new Santana?

The radar controller of the new Santana is located inside the left rear trim panel of the trunk, which is a small computer board. The function of the reversing radar: The reversing radar is a safety auxiliary device when the car is parked or reversing. It can inform the driver of the surrounding obstacles through sound or more intuitive display, relieving the troubles caused by the driver's need to look around when parking, reversing, and starting the vehicle, and helping the driver eliminate blind spots and blurred vision. The main functions of the reversing radar are: Accurately measure the distance between the rear of the car and the nearest obstacle; When reversing to the limit distance, it can emit a rapid warning sound to remind the driver to pay attention to braking; It can repeatedly emit voice warnings to remind pedestrians to pay attention.
17
5
Share

How many people can the Elysion seat?

The Elysion can seat 7 people. Taking the 2019 Elysion as an example, it is an MPV with the following dimensions: length 4950mm, width 1842mm, height 1711mm, wheelbase 2900mm, minimum ground clearance 134mm, and curb weight 1941kg. The 2019 Elysion features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 2.0L naturally aspirated engine producing a maximum horsepower of 146PS, maximum torque of 175Nm, and maximum power of 107kW, paired with an electronic continuously variable transmission.
12
5
Share

What is the procedure for turning off an automatic transmission car?

Automatic transmission car shutdown procedure is: 1. After stopping the vehicle, depress the brake pedal and shift the gear into P position; 2. Check the instrument panel to confirm the correct gear position, then pull up the handbrake, release the brake pedal, and press the one-touch start button to turn off the vehicle. An automatic transmission car does not require the driver to manually shift gears; the vehicle will automatically select the appropriate gear based on driving speed and traffic conditions. The correct method for starting an automatic transmission car is: 1. Connect the power, then start the car; 2. After ignition, depress the brake, shift to D gear, release the handbrake, and gently press the accelerator to start; 3. After starting, accelerate appropriately according to road conditions.
15
1
Share

What Causes the Chassis Noise in Audi A3?

Audi A3 chassis noise causes: Loose components: Due to violent impacts or improper installation of other equipment, mutual interference occurs between two components; this can be resolved through reshaping and repair or by replacing the relevant components to eliminate interference. Loose bolts or nuts: Long-term driving on poor road conditions may cause bolts to loosen, or improper disassembly or installation may result in bolt damage or insufficient torque; bolts can be tightened or replaced if necessary. Drive shaft universal joint failure: Damaged dust covers and oil leaks that are not repaired in time may cause abnormal wear of small bearings; the outer (inner) CV joint or universal joint can be replaced.
13
4
Share

How to Remove the Central Control Panel of the Elysion?

The method to remove the central control panel of the Elysion is as follows: First, remove the Elysion's air conditioning control module. Then, use a trim removal tool to loosen and pry off the upper cover panel of the central console. Next, remove the air vents, unscrew the fixing screws around the central control, and disconnect the wiring harness at the back. After completing these steps, the central control panel can be removed. The 2019 Elysion model features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 146 PS, a maximum torque of 175 Nm, and a maximum power of 107 kW. The engine is paired with an electronic continuously variable transmission.
4
0
Share

How Many Tons Can a 4-Axle Tractor with 8-Wheels Haul?

The hauling capacity of a 4-axle tractor with 8-wheels depends on factors such as the engine's power and the vehicle's own weight. Below is a detailed introduction to this type of truck: 1. Types: 4-axle tractors with 8-wheels include various dump trucks, heavy-duty trucks, and trailer trucks. 2. Usage: As a heavy-duty vehicle, it has a large hauling capacity and is commonly used in construction and transportation. Heavy-duty vehicles refer to M and N category vehicles with a maximum gross mass exceeding 3500Kg. These vehicles typically consist of heavy-duty tractors and heavy-duty trailers forming a truck train. They usually employ multi-axle tandem hydraulic suspension systems and are designed for transporting oversized and overweight cargo that exceeds the limits set by road traffic regulations.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.