Does the BAIC BJ40 have a diesel version?

What are the requirements for obtaining a blue license plate for motorcycles in Shanghai?

Shanghai motorcycle blue license plate requirements are: as long as you have a Shanghai household registration, you can obtain a license plate, but the vehicle management office does not have new quotas, so you must have your own original license plate quota or obtain it from the scrapping of an old vehicle that has already been licensed, or transfer it from an individual. The driving range is the entire city (except for some areas such as the 'three horizontal and three vertical' roads and Lujiazui). Here is some additional information: Introduction: Blue license plate vehicles refer to cars with blue license plates, which are usually blue with white characters and white borders. Overview: Small car license plates are blue with white characters and white borders. Vehicles with a total weight of less than 4,500KG (excluding), seating capacity (excluding the driver) of fewer than 20 people (excluding), and a body length of less than 6 meters (excluding) are required to install this type of license plate.

8

0

Share

What is the standard size of a bus?

Buses vary in length depending on the passenger capacity required by different cities, with common lengths being 12 meters and 10 meters. However, the width and height are generally the same, with a width of 2.5 meters and a height of approximately 3 meters. The typical dimensions are: 11530×2500×3040mm. Of course, these can only serve as a reference, as conditions differ from city to city. Below are some driving precautions: Check the rearview mirrors: When turning or changing lanes, always use the turn signals and reduce speed. Before turning, be sure to check the rearview mirrors. For left turns, primarily look at the left rearview mirror, and for right turns, primarily look at the right rearview mirror. Both left and right turns require checking the interior rearview mirror. Don’t stare at the front of the vehicle: When driving on a clear road, look straight ahead at a distance of 100 meters, avoiding fixation on the immediate front of the vehicle. Depress the clutch: Typically, when decelerating at speeds above 40 km/h, there’s no need to depress the clutch immediately; wait until the speed drops to around 20 km/h before depressing the clutch. Steering: For high-speed turns, steer slowly, and for low-speed turns, steer quickly.

13

4

Share

Why Do Motorcycles Need Oil Changes?

Here are the reasons why motorcycles require oil changes: Break-in period for new bikes: During the initial break-in period of a new motorcycle, metal shavings generated from component friction and residual machining debris in the engine can contaminate the oil, accelerating component wear. In severe cases, this may even clog oil passages. Therefore, new motorcycles should have their oil forcibly changed after 300 kilometers of riding. Cold climate operation: Motorcycles used in winter or cold regions require more frequent oil changes because fuel tends to condense and dilute the oil, reducing its viscosity. Carbon buildup issues: Engines frequently operating under low loads tend to form carbon deposits due to incomplete combustion of oil entering the cylinders, which degrades oil quality and necessitates more frequent changes.

20

3

Share

Can a B2 License Holder Drive a Tractor Head Without a Trailer?

A B2 license holder cannot drive a tractor head even without a trailer, as the tractor head itself is classified as a trailer. A trailer refers to a vehicle that is towed by a motor vehicle and does not have its own power drive. It consists of a combination of one motor vehicle (such as a truck, tractor, or forklift) and one or more trailers. The cargo truck or towing vehicle serves as the driving section of the vehicle train, known as the main vehicle, while the towed section is called the trailer. Below are some driving precautions: Check the rearview mirrors: When turning or changing lanes, always use the turn signals, slow down, and check the rearview mirrors before turning. For left turns, primarily check the left rearview mirror; for right turns, primarily check the right rearview mirror. For both left and right turns, always check the interior rearview mirror. Avoid fixating on the area directly in front of the vehicle: On open roads, keep your gaze level and focus about 100 meters ahead, rather than staring at the immediate front of the vehicle. Clutch control: When decelerating at speeds above 40 km/h, there is no need to press the clutch initially; only press the clutch when the speed drops to around 20 km/h. Steering: Use slow steering movements for high-speed turns and quick steering movements for low-speed turns.

10

3

Share

What Causes Lack of Power After an Oil Change?

Here are the reasons for lack of power after an oil change: Oil Viscosity and Quality: Choosing the right oil viscosity for your vehicle model is crucial. If the oil viscosity is too thin, it will definitely affect the oil's performance, impacting both the engine's operation and power output. Additionally, the quality of the oil must be carefully considered, as inferior oil often lacks reliable quality assurance, which can lead to sluggish acceleration without obvious warning. Oil Fill Level: If too much oil is added, the excess can easily enter the combustion chamber (due to excessive internal pressure), forming gummy carbon deposits. While the initial impact may not be noticeable, over time, the buildup of carbon deposits will worsen, not only reducing the vehicle's overall performance but also clogging the catalytic converter, leading to excessive emissions (and increased fuel consumption). In severe cases, it may even cause oil burning. Oil Filter: If the oil filter is not replaced during the oil change, it can also result in sluggish performance. The oil filter's primary function is to remove contaminants, sludge, and moisture from the oil. If not replaced regularly, even with fresh oil, the pollutants from the old filter can re-enter the new oil, compromising its effectiveness.

19

3

Share

Which Wire to Cut to Start a Motorcycle?

Motorcycle can be started by cutting the dual-wire alternating ignition wire. The method to start a motorcycle without a key is to connect the red and black wires together. Locate the ignition wires, one red and one black, where red is positive and black is negative. Touching the two wire ends together will start the motorcycle. Here is additional information: Ignition System: Includes the ignition coil, CDI igniter, high-voltage coil, spark plug, etc. Principle: The primary electricity generated by the motorcycle's ignition coil enters the igniter, then the current from the igniter goes into the high-voltage coil. The high-intensity current from the high-voltage coil enters the spark plug to ignite and burn the gasoline in the cylinder, pushing the crankshaft to work under high explosive pressure.

20

4

Share

Does the BAIC BJ40 have a diesel version?

What are the requirements for obtaining a blue license plate for motorcycles in Shanghai?

What is the standard size of a bus?

Why Do Motorcycles Need Oil Changes?

Can a B2 License Holder Drive a Tractor Head Without a Trailer?

What Causes Lack of Power After an Oil Change?

Which Wire to Cut to Start a Motorcycle?

Will Forgetting to Turn on Headlights Be Captured by Electronic Eyes?

Where is the frame number of a tricycle located?

What is the appropriate speed for third gear?

Can I change from C2 to C1 after registration?