Does the Audi EA888 Engine Burn Oil?

What does PEPS mean in cars?

PEPS in cars refers to the keyless system, which stands for Passive Entry Passive Start system. The function of the keyless system: when the driver steps into a specified range, the system can identify the authorized driver and automatically open the door; when leaving the vehicle, the door locks will automatically lock and enter an anti-theft state. At the same time, the keyless system can also remember all service and diagnostic information, such as seat adjustment, air conditioning settings, entertainment information, etc. The keyless system is a combination of intelligence and convenience, eliminating many cumbersome steps and simplifying car operations. The keyless system mainly operates through four components: door handle switch, low-frequency antenna, car key, and high-frequency receiver. The working principle is as follows: 1. Carry the car key near the vehicle (the car key must have power). When pressing the vehicle button or pulling the door handle, the vehicle will receive the ignition or unlock signal and send a signal to the low-frequency antenna. 2. After receiving the signal, the low-frequency antenna will send a low-frequency trigger signal to the car key. 3. The car key receives the low-frequency trigger signal and sends a high-frequency unlock signal. 4. The high-frequency receiver receives the high-frequency unlock signal, and the entire vehicle completes unlocking or ignition.

18

2

Share

What are the hidden practical features of the 10th-generation Accord?

The hidden features of the 10th-generation Accord are as follows: 1. Automatic mirror folding when locking the car: When the car is locked, the side mirrors will automatically fold to prevent scratches from other vehicles or pedestrians, which is very convenient. 2. Automatic door locking: When the car's speed exceeds 20 km/h or the preset speed set by the manufacturer, the doors will automatically lock to prevent passengers from opening them while driving, ensuring safety. 3. Automatic mirror tilt in reverse gear: When the car is shifted into reverse, the side mirrors will automatically tilt downward, helping the driver see the position of the rear wheels for better parking.

8

2

Share

What is a K1 driver's license?

The "Regulations on the Business Standards of Motor Vehicle Driver's Licenses" stipulate the implementation of a graded system for motor vehicle driver's licenses, dividing them into 15 categories: A1, A2, A3, B1, B2, C1, C2, C3, C4, D, E, F, M, N, P. There is no K series. More details are as follows: 1. City Bus A3: City buses with a capacity of 10 or more passengers. C1, C2, C3, C4 Medium-sized Bus B1: Medium-sized passenger vehicles (including city buses with a capacity of 10 to 19 passengers). C1, C2, C3, C4, M. 2. Large Truck B2: Heavy and medium-sized trucks; large, heavy, and medium-sized special operation vehicles. Small Car C1: Small and micro passenger vehicles, as well as light and micro trucks, light, small, and micro special operation vehicles. C2, C3, C4. 3. Small Automatic Car C2: Small and micro automatic passenger vehicles, as well as light and micro automatic trucks. Low-speed Truck C3: Low-speed trucks (originally four-wheel agricultural transport vehicles). C4 Three-wheeled Car: Three-wheeled cars (originally three-wheeled agricultural transport vehicles). Ordinary Three-wheeled Motorcycle D: Three-wheeled motorcycles with an engine displacement greater than 50ml or a maximum design speed greater than 50km/h. E, F. 4. Ordinary Two-wheeled Motorcycle E: Two-wheeled motorcycles with an engine displacement greater than 50ml or a maximum design speed greater than 50km/h. F Light Motorcycle: Motorcycles with an engine displacement less than or equal to 50ml and a maximum design speed less than or equal to 50km/h. Wheeled Self-propelled Machinery M: Wheeled self-propelled machinery. Trolleybus N: Trolleybuses. Tram P: Trams.

17

2

Share

How to Replace the Air Filter in a Superb?

Steps to replace the air filter in a Skoda Superb: 1. Open the engine hood and locate the air filter housing. 2. Gently release the two clips securing the housing cover, then lift the entire air filter cover. Note: Some models may have screws securing the cover, which need to be removed with a screwdriver. 3. Lift the air filter cover and remove the old air filter. 4. Install the new air filter, replace the cover, and secure the clips. Additional details: 1. The Skoda Superb air filter is located in the engine compartment, on the right side of the engine. Simply remove the fixing screws on the air filter box with a screwdriver to access the air filter. 2. The Skoda Superb air filter finely filters the air entering the engine cylinders, ensuring sufficient and clean air enters the cylinders. Keeping it clean and unobstructed is crucial for the engine's lifespan. 3. When removing dust from the air filter paper, use a soft brush to sweep along the folds to remove surface dust and gently tap the filter end to dislodge dirt. If the original color of the filter paper is no longer visible after cleaning the outer surface, or if the inner surface appears darkened, the filter must be replaced.

2

Share

What is the Principle of Oxygen Sensor Fault Diagnosis?

Oxygen sensor fault diagnosis principle: The PCM (ECM/ECU) monitors oxygen sensor feedback based on the following conditions. 1. Sensitivity: The cycle time of the oxygen sensor from lean to rich and back to lean. When the sensor response time is too long, the PCM detects a fault. 2. Conductivity: If the oxygen sensor voltage remains constant at about 0.3V, the PCM detects an open circuit. When poisoning or aging occurs, the voltage cycle of the oxygen sensor significantly increases or the signal voltage of the oxygen sensor becomes flat. 3. Output voltage: The PCM monitors the output voltage of the oxygen sensor. When the highest and lowest voltages of the oxygen sensor cannot reach the specified values, the PCM detects a fault. If the front heated oxygen sensor fails, the PCM switches the fuel injection system feedback control from closed-loop to open-loop and stores a fault code.

3

4

Share

In-depth Analysis: What are the Differences Between the Prado and Land Cruiser?

The differences between the Prado and Land Cruiser: 1. Different body dimensions: The Prado has a body size of 5010mm in length, 1885mm in width, and 1890mm in height, with a wheelbase of 2790mm; the Land Cruiser has a body size of 5170mm in length, 1975mm in width, and 1930mm in height, with a wheelbase of 2850mm. 2. Different fuel tank capacities: The Prado has a fuel tank capacity of 87 liters; the Land Cruiser has a fuel tank capacity of 138 liters. Other differences are as follows: 1. Different minimum ground clearance: The Prado has a minimum ground clearance of 215mm; the Land Cruiser has a minimum ground clearance of 230mm. 2. Positioning: The Prado leans more towards an urban SUV; while the Land Cruiser is similar to a Hummer, capable of performing at its true level in military or more extreme environments. 3. Exterior: The Prado's front grille is vertical; while the Land Cruiser's is horizontal.

17

4

Share

Does the Audi EA888 Engine Burn Oil?

What does PEPS mean in cars?

What are the hidden practical features of the 10th-generation Accord?

What is a K1 driver's license?

How to Replace the Air Filter in a Superb?

What is the Principle of Oxygen Sensor Fault Diagnosis?

In-depth Analysis: What are the Differences Between the Prado and Land Cruiser?

Where to Add Windshield Washer Fluid for the Magotan?

What items are included in a 15,000-kilometer car maintenance?

What is the range of the Model 3?

What Causes the Abnormal Noise When Accelerating in Honda Lingpai?