Does the Audi A5 depreciate significantly?

Are External Tire Pressure Monitoring Systems Accurate?

Not very accurate. External ones are prone to being lost or flung off. Additionally, since they are exposed externally, they operate in harsh conditions and have significant data inaccuracies. The mechanism of external tire pressure monitoring involves replacing the valve cap with a sensor, which is directly attached to the valve stem. This presses the valve core inward, allowing air from inside the tire to escape, thereby directly detecting tire pressure and temperature. There are five major controversies regarding external tire pressure monitoring systems: 1. Forcibly and permanently pushing the valve core inward, compromising its leak-proof mechanism: The entire tire's internal pressure of over 30 psi relies on the valve core's structure to contain it. The external sensor essentially damages the valve core as a prerequisite, allowing internal tire air to pass through the valve stem and detect pressure and temperature at the valve opening. 2. Centrifugal force generated during driving may cause the valve stem to bend or even tear: Attaching a sensor to the valve stem adds weight. As the tire rotates during driving, the valve stem is subjected to centrifugal force. Prolonged and repeated stress may cause the rubber valve stem to bend or even break. 3. Uncontrollable weight or quality of the valve stem on the wheel rim may lead to air leaks: Since external sensors are directly screwed onto the existing rubber valve stems of the wheel rims, the condition of the original rubber valve stems cannot be controlled. If a leak occurs after installation, it is difficult to determine whether it is due to the aging of the original rubber valve stem. 4. Use of non-military-grade batteries may pose risks when tire temperatures are excessively high: External sensors emphasize the ease of battery replacement, so most use standard button batteries rather than the military-grade batteries specified by manufacturers. When tire temperatures become extremely high, the sensor may malfunction at best, or the battery could pose a danger at worst. 5. Emphasis on easy installation overlooks the need for tire dynamic balancing: Since the focus is on easy installation without removing the tire, dynamic balancing is often skipped after sensor installation. As a result, even if all four tires were initially well-balanced, adding external sensors disrupts their balance, violating proper tire usage and maintenance practices.

12

2

Share

Does the 2012 Honda CR-V not come with Bluetooth functionality?

2012 Honda CR-V comes with Bluetooth functionality. Below is a relevant introduction about car Bluetooth: 1. Function: The main function is to connect with a mobile phone via Bluetooth technology for hands-free calls during normal driving, aiming to free both hands and reduce the risk of traffic accidents. It automatically identifies mobile phones and can connect with them without the need for cables or phone holders. 2. Bluetooth Technology: Bluetooth technology is an open global standard for wireless data and voice communication. Its essence is to establish a common radio air interface for communication environments between fixed or mobile devices, further integrating communication technology with computer technology, enabling various 3C devices to communicate or operate with each other within a short range without the need for wires or cables.

3

Share

What happens if you release the clutch while stepping on the brake?

Releasing the clutch while stepping on the brake will cause the car to stall. Here is a related introduction to the clutch: 1. Clutch usage techniques: Use the heel of your left foot as a pivot point and control the clutch pedal with the ball of your foot; when starting the car, first press the clutch pedal, then find the semi-engaged state, while slightly pressing the accelerator with your right foot to increase the car's RPM, then slowly release the clutch, pausing slightly when entering the semi-engaged state. When downshifting, first reduce the car's speed until it reaches the speed required for the lower gear, then press the clutch, and follow the principle of 'one fast, two slow, three linkage' to control the clutch.

14

5

Share

What are the impacts of frequent clogging in the Tiguan L's particulate filter?

The particulate filter is a ceramic filter installed in the engine's exhaust system, designed to capture particulate emissions before they enter the atmosphere, effectively reducing particulate matter emissions. The impacts of a clogged particulate filter in the Tiguan include: 1. Increased fuel consumption. 2. Transmission shifting jerkiness, with abnormal noises during acceleration in low gears. 3. Failure of the start-stop function. Additional information: The Tiguan is a mid-size SUV under SAIC Volkswagen. Taking the Tiguan 2021 280 TSI Automatic Two-Wheel Drive Comfortline as an example, its dimensions are 4712 mm in length, 1839 mm in width, and 1673 mm in height, with a wheelbase of 2791 mm. The vehicle features a 5-door, 5-seat configuration, a fuel tank capacity of 60L, a trunk capacity ranging from 495L to 1780L, and a curb weight of 1595 kg.

19

3

Share

What is the reason for Tianlong vehicle fault code 10?

Tianlong vehicle fault code 10 reasons: 1. Caused by battery corrosion or battery leakage. 2. Engine spark plug getting wet on rainy days. 3. Circuit fault: For Tianlong vehicles equipped with dci11 engine, there is a gray relay that supplies power to the vehicle control unit (VECU). The coil end connects to VECU pin 9. If there's internal VECU failure or circuit fault, the gray relay coil end cannot be grounded, causing the instrument panel to display fault code 9. The gray relay contact end connects to VECU pin 10. If the gray relay fails or this circuit has issues, it will cause the instrument panel to display fault code 10.

12

0

Share

Can I Still Drive My BMW When the Brake Fluid Maintenance is Due?

You can still drive your BMW when the brake fluid maintenance is due, but you should promptly visit a repair shop or 4S store for replacement. Here are the characteristics of high-quality brake fluid: 1. Excellent rust prevention for various metals in the braking system: Generally, brake fluid is highly corrosive, but high-quality brake fluid significantly reduces corrosion and rusting on various metals, extending the lifespan of the brake oil pump. If inferior brake fluid is used, it will quickly corrode the metal, posing a hazard to driving. 2. Excellent low-temperature fluidity: This is particularly noticeable in extremely cold regions. High-quality brake fluid ensures the brakes remain sensitive and reliable even in severe cold. Inferior brake fluid performs poorly at low temperatures, with a high freezing point, and may solidify at temperatures below -20°C, greatly compromising driving safety.

19

3

Share

Does the Audi A5 depreciate significantly?

Are External Tire Pressure Monitoring Systems Accurate?

Does the 2012 Honda CR-V not come with Bluetooth functionality?

What happens if you release the clutch while stepping on the brake?

What are the impacts of frequent clogging in the Tiguan L's particulate filter?

What is the reason for Tianlong vehicle fault code 10?

Can I Still Drive My BMW When the Brake Fluid Maintenance is Due?

What car series is the Atenza?

What is the wiring method for the Wuling Hongguang igniter?

What Causes the Central Locking System of Buick Excelle to Malfunction?

What is the tire model for the 2015 Ford Kuga?