Does the Audi A5 Burn Engine Oil?

1 Answers
BryceLynn
07/30/25 5:17am
Audi A5 models mostly experience engine oil burning, primarily due to issues with the oil-gas separator. Below are the detailed specifications of the Audi A5: 1. Vehicle Positioning: The Audi A5 is a mid-size coupe, available in two-door, four-door, and convertible versions. 2. Powertrain: The Audi A5 is equipped with two types of engines—a low-power 2.0-liter turbocharged engine and a high-power 2.0-liter turbocharged engine, both paired with a 7-speed dual-clutch transmission. 3. Suspension: The front suspension of the Audi A5 uses a five-link independent suspension, and the rear suspension also employs a five-link independent suspension.
Was this review help?
11
1
Share
More Forum Discussions

How to reset the tire pressure monitoring system on BYD F3?

The method to reset the tire pressure monitoring system on BYD F3: Adjust the underinflated tire pressure to the standard value, then drive at a constant speed of 40 km/h for about 10 minutes. The tire pressure monitoring system will recalibrate automatically, and the tire pressure warning light will turn off once the recalibration is successful. If the tire pressure warning light comes on while driving, reduce speed, maintain control of the steering wheel, and find a safe place to inspect the tires. The BYD F3 is an A+ class sedan produced by BYD Auto, with dimensions of 4533mm in length, 1705mm in width, 1490mm in height, and a wheelbase of 2600mm. The interior design of the BYD F3 features a simple and elegant style, with a fresh light color scheme and comprehensive, well-equipped configurations.
15
1
Share

What is the logo of the Lvaida in Volkswagen?

Lvaida is the logo of the Volkswagen Lavida, the first A-class car independently designed and developed by Shanghai Volkswagen, and also an important model in Volkswagen's product line. Here are some extended details: 1. Exterior: The front face design of the Lavida is somewhat different from previous A-class cars under the Volkswagen brand. The Lavida's headlights feature a unique teardrop shape, while the traditional Volkswagen grille and U-shaped front face design are also carried forward and inherited in the Lavida. The bumper design of the Lavida is also distinctive, with a thick and powerful curve that harmonizes well. The waistline of the Lavida is quite sharp. From the exterior, except for the logo on the front face, it is hard to see the traditional, conservative Volkswagen styling in the Lavida. Instead, the Lavida's appearance is more youthful and fashionable. 2. Advantages: The biggest advantage of the Volkswagen Lavida is its well-proportioned and aesthetically pleasing body, along with a rich set of standard configurations. The passenger space has a certain advantage among cars of the same class, making it more comfortable—a point that consumers particularly appreciate. Its engine and transmission technology are very advanced, featuring low fuel consumption and a solid, safe body.
19
1
Share

What are the hazards of P130A cylinder compression ratio fault with misfire in cylinder 1?

P130A cylinder compression ratio fault and misfire in cylinder 1 have the following hazards: 1. Decrease in engine speed and power: Abnormal engine operation or insufficient power; The engine operates unevenly and shakes rhythmically at high, medium, and low speeds, with black smoke emitted from the muffler. 2. Increased fuel consumption and emission pollution: Engine misfire may lead to phenomena such as high fuel consumption, black smoke emission, lack of power, decreased horsepower, inability to accelerate, and severe shaking. 3. Accelerated wear of moving parts: Shortens the service cycle of lubricating oil.
7
4
Share

What type of oil is used in rotary vane vacuum pumps?

Introduction to oil for rotary vane vacuum pumps: 1. General conditions: For applications requiring a total pressure above 6X10-2 Pa, high-speed vacuum pump oil produced in Shanghai is recommended. For small pumps below 4L/s, No.1 vacuum pump oil can be used as a substitute. For direct-drive pumps above 8L/s, No.3 diffusion pump oil can be used as an alternative. 2. If the vacuum requirement is not high: and oil contamination and replacement are frequent, or vacuum pump oil supply is difficult, No.50 mechanical oil can be used as a substitute. 3. If the ambient temperature is low: and starting is difficult with no high requirement for ultimate vacuum, vacuum pump oil or mechanical oil with slightly lower viscosity can be used.
15
1
Share

What Are the Consequences of a 6-Point Deduction?

A 6-point deduction on your driver's license has no impact as long as you do not accumulate 12 points within one cycle. According to regulations: If a motor vehicle driver's accumulated points do not reach 12 within a scoring cycle and all fines have been paid, the points will be cleared. However, if there are unpaid fines even if the points are below 12, the points will carry over to the next scoring cycle. The following behaviors result in a one-time 6-point deduction, as detailed below: 1. Driving a motor vehicle in violation of traffic signals (previously 3 points). 2. Operating a commercial passenger vehicle (excluding buses) or school bus with passengers exceeding the approved capacity by less than 20%, or driving other passenger vehicles with passengers exceeding the approved capacity by more than 20%. 3. Driving medium-sized or larger passenger vehicles or hazardous material transport vehicles on highways or urban expressways at speeds exceeding the limit by less than 20%. 4. Driving medium-sized or larger passenger vehicles or hazardous material transport vehicles on roads other than highways or urban expressways, or driving other motor vehicles at speeds exceeding the limit by more than 20% but less than 50%.
20
1
Share

What is the difference between S gear and L gear? How to use S gear and L gear?

Introduction to the differences between S gear and L gear: 1. Different nature: L gear is the low gear; S gear is the sport gear. 2. Different characteristics: In S gear sport mode, the gearbox delays the upshift timing, keeping the engine at high speed for a longer time, allowing the car to move at low gear and high speed for a longer time, thereby obtaining greater torque output and acceleration. When the user engages L gear, the car will not upshift and will continue to move forward at high speed and low gear, which can better pull cargo. 3. Different functions: L gear can be used to control speed, climb slopes with heavy loads, and increase traction when driving on muddy roads. S gear can be used for overtaking and acceleration, fully releasing the engine's power.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.