Does the Annual Inspection Require the Vehicle Owner to Be Present?

1 Answers
MartinMarie
07/29/25 11:53pm
Annual inspection does not require the vehicle owner to be present in person; it can be handled by an authorized agent. However, the necessary materials must be prepared, including the vehicle, driving license, compulsory traffic insurance policy, ID card and its copy. If handled by an agent, the agent's ID card and its copy are also required. Annual inspection refers to the annual or biennial safety inspection of the vehicle, covering a comprehensive check of components such as the horn, brakes, axle weight, chassis, ignition system, lighting system, exhaust system, and license plate installation. Types of motor vehicle annual inspections include: 1. Non-operational passenger vehicles with 9 seats or fewer; 2. Passenger vehicles and trucks with more than 9 seats; 3. Motorcycles, tricycles, and other similar vehicles.
Was this review help?
15
2
Share
More Forum Discussions

What is the Principle of Maglev Cars?

Maglev cars operate on the principle of utilizing changes in magnetic fields to generate electric current, ultimately achieving both levitation and propulsion for the vehicle. The practical applications of maglev car technology are as follows: The First Maglev Car: The world's first maglev car was developed by Japan, though it was only a scaled-down model car built to normal automotive proportions. This model successfully completed a 26-meter test run. Actual Levitation Methods of Maglev Cars: Maglev cars employ two primary levitation technologies: Germany's Electromagnetic Suspension (EMS) system and Japan's Electrodynamic Suspension (EDS) system.
12
3
Share

Can a mortgaged vehicle be inspected with only the vehicle license?

A mortgaged vehicle cannot be inspected with only the vehicle license. To inspect a mortgaged vehicle, you need to provide a copy of the original owner's ID card, a copy of the vehicle license, a copy of the insurance policy, and the owner must check the information at the local vehicle management office entrusted. After completing the entrusted vehicle inspection procedures, the owner should drive the vehicle to the motor vehicle inspection line at the vehicle management office for inspection. After passing the inspection, the vehicle inspection report should be obtained, and the inspection qualification mark should be printed. The following is an introduction to vehicle inspection: 1. Passenger vehicles for commercial use: inspected once a year within 5 years; inspected every 6 months after 5 years; 2. Trucks and large and medium-sized non-commercial passenger vehicles: inspected once a year within 10 years; inspected every 6 months after 10 years; 3. Small and mini non-commercial passenger vehicles: inspected once every 2 years within 6 years; inspected once a year after 6 years; inspected every 6 months after 15 years; 4. Motorcycles: inspected once every 2 years within 4 years; inspected once a year after 4 years; 5. Tractors and other motor vehicles: inspected once a year. Commercial motor vehicles that have passed the safety technical inspection within the specified inspection period do not need to undergo repeated safety technical inspections; 6. Vehicles exceeding the scrapping age: cannot be transferred (sold or bought), but can continue to be used. For buying or selling, you can first apply for the vehicle's scrapping certificate (canceling the vehicle's file) at the vehicle management office, and then proceed with the transaction.
4
5
Share

How to turn on the high beam on the Tayron?

Tayron turning on the high beam is as follows: 1. First, start the vehicle and let it idle. 2. The high beam switch of the Tayron is a lever type. Rotate the handle to the high beam position, and the high beam will light up. Here are some introductions about the Tayron's high beam: (1) The Tayron's high beam uses LED light source, which has a long lifespan, reaching 60,000 to 100,000 hours, 10 times that of traditional light sources, and basically does not require lamp replacement. (2) It is energy-saving, environmentally friendly, radiation-free, and has a fast response. (3) It is relatively small in size, highly malleable, and naturally comes in a variety of shapes.
6
1
Share

What Does Routine Car Maintenance Include?

Routine car maintenance primarily consists of two items: Item 1 - Minor maintenance mainly includes oil and oil filter replacement. Item 2 - Major maintenance involves replacing engine oil, oil filter, air filter, and fuel filter as part of routine servicing. Below are some additional details about car maintenance: 1. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain components of a vehicle, also known as automobile servicing. 2. Modern car maintenance mainly covers the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 3. The purpose of car maintenance is to keep the vehicle clean and in proper technical condition, eliminate potential hazards, prevent malfunctions, slow down deterioration, and extend the service life.
2
2
Share

Is the Front Windshield Film Applied on the Inside or Outside?

The front windshield film is applied on the inside of the car. Here is its introduction: Car window film is a thin layer of material applied to the front and rear windshields, side windows, and sunroof of a vehicle. This layer is also known as solar film or heat-insulating and explosion-proof film. Below are the functions of car window film: (1) Primarily to block ultraviolet rays, reduce heat, and prevent injuries caused by sudden glass shattering. (2) According to the one-way visibility feature of solar film, it protects personal privacy. (3) Additionally, it can reduce damage to interior items and passengers caused by UV exposure, and to some extent, achieve fuel-saving effects.
13
3
Share

What engine oil should be used for China VI compliant vehicles?

China VI compliant vehicles should use 5w30 engine oil. The introduction of 5w30 oil and the classification standards for engine oil are as follows: Introduction to 5w30 oil: 5w30 oil can withstand an external low temperature of -30 degrees Celsius, and its kinematic viscosity standard at 100 degrees Celsius is 30. Classification standards for engine oil: The 'W' stands for Winter, and the smaller the number before W, the better the low-temperature fluidity of the oil, indicating a lower usable environmental temperature and better protection for the engine during cold starts. The number after 'W' represents the viscosity index of the oil at high temperatures. The larger the number, the higher the viscosity, which provides better protection for the engine but also consumes more fuel.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.