Does the Accord belong to Dongfeng Honda or GAC Honda?

1 Answers
MacGarrett
07/29/25 6:27pm
The Accord belongs to GAC Honda. The new Accord is the tenth-generation product, which is equipped with three types of engines: a low-power version 1.5-liter turbocharged engine, a high-power version 1.5-liter turbocharged engine, and a 2.0-liter naturally aspirated engine. The model with the 2.0-liter naturally aspirated engine is the hybrid version. GAC Honda was established in July 1998, earlier than Dongfeng Honda. The name originates from the collaboration between Guangzhou Automobile Group and Honda Motor Co., Ltd. of Japan, combining 'GAC' and 'Honda' to form GAC Honda, which is a joint venture.
Was this review help?
4
4
Share
More Forum Discussions

What Causes the Dense Spots on the Car's Windshield?

The dense spots on the car's windshield could be insect residue. During hot summer months, insects encountering moisture can form insect residue, which easily solidifies on the glass, creating spots that are difficult to wipe off. Apart from insect residue, stubborn stains like bird droppings, asphalt, tar, and tree sap that remain on the paint surface for a long time can cause discoloration due to organic compounds and should be removed promptly. Methods for Removing Car Stains: 1. Water and Brush Cleaning. For stains that haven't been attached for long, they can usually be removed by brushing. When brushing, use water at room temperature or below and choose a bristle brush to avoid scratching the paint. 2. Organic Solvent Cleaning. If brushing doesn't remove the stain, organic solvents can be used. However, ensure the solvent doesn't dissolve the car paint (e.g., solvents containing alcohols or benzene). Generally, gasoline can be used to soak the stain before wiping it off. 3. Specialized Cleaners. Tar removers are commonly used in car detailing, primarily for cleaning organic hydrocarbons like asphalt and tar. Tree sap cleaners are specialized products for removing tree sap and bird droppings, effectively cleaning these substances from the car's surface. Using specialized cleaners ensures effective stain removal without damaging the paint. It's recommended to prioritize these products; if unavailable, the first two methods can be considered. 4. Polisher Cleaning. For stubborn stains that have been attached for too long, a polisher can be used. Adding an appropriate abrasive during operation can quickly and effectively remove tough stains like asphalt, tar, bird droppings, and tree sap from the car's surface.
6
3
Share

What are the reasons for the frequent failure of the Sagitar ABS sensor?

ABS warning light can illuminate in various states, with different causes and solutions for each state, as detailed below: State 1: ABS warning light remains constantly lit (most common). Cause 1: The sensing part of the ABS speed sensor is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle speed and the wheel slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt from the speed sensor and adjust the gap between the speed sensor and the signal ring to restore normal function. Cause 2: Poor signal due to loose connections between system wires or poor contact of the ABS relay, leading to system failure. Solution: Check the wire connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple vehicle electrical devices are in use, the battery voltage drops below 10.5V. As the engine speed increases, the voltage rises, and the ABS warning light turns off. The ABS system power supply voltage is too low, possibly due to poor wire contact or grounding issues. Solution: Check the battery's specific gravity; inspect the charging system; examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light remains lit after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact of the ABS hydraulic valve body; poor contact of the ABS hydraulic valve body wire connector; ABS computer malfunction. Solution: Loosen the grounding screw of the hydraulic valve body, then retighten it, cleaning the contact surface if necessary; check if the connector gap has widened; replace the ABS or ABS/ASR computer. State 4: ABS warning light illuminates during high-speed driving. Cause: During high-speed driving, the ABS computer detects a significant discrepancy between the rear and front wheel speed signals; incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact of the brake light. Solution: With the engine running, press the brake pedal, push the brake switch linkage down fully with a finger, then release the brake pedal to complete the self-setting position; replace the brake light switch. If the ABS warning light is on, it is advised not to continue driving, as it indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, preventing the driver from slowing down or adjusting the vehicle's trajectory, posing significant safety risks.
11
1
Share

Is the Audi RS4 four-wheel drive?

The Audi RS4 is four-wheel drive, equipped with a full-time four-wheel drive system. There are three common types of four-wheel drive systems: 1. Full-time four-wheel drive system provides power to all four wheels at all times; 2. Part-time four-wheel drive system allows mode switching; 3. On-demand four-wheel drive system is a simpler, more compact, and lighter four-wheel drive system, commonly used in most urban SUVs or four-wheel drive sedans. The full-time four-wheel drive system in the RS4 can distribute power to all four wheels, making it more intelligent. Using a four-wheel drive system can enhance wheel traction and the vehicle's acceleration performance.
6
5
Share

What is the engine model of the Audi RS7?

Audi RS7 is equipped with a 4.0T twin-turbocharged engine, with a maximum power of 445kW and a maximum torque of 750Nm. In terms of the transmission system, the engine is matched with an 8-speed automatic manual transmission. The Audi RS7 is a high-performance car launched by Audi. The Audi RS7 adopts a fastback design with sharp design language. The front face design of the car gives it a strong sense of performance. The front face also features the brand's signature headlights, which look very powerful. The hexagonal design of the front grille enhances the sporty effect of the car's front face.
3
2
Share

How to Turn On the Air Conditioning ECO Mode?

To activate the air conditioning ECO mode, simply press the ECO button. The ECO mode only functions when the air conditioning is set to cool. In this state, the compressor will operate, with its control point elevated, and the compressor's start-stop cycle is regulated by the evaporator temperature. The air conditioning system, commonly referred to as car air conditioning, is designed to adjust and maintain the temperature, humidity, air cleanliness, and airflow within the vehicle cabin at optimal levels. It provides a comfortable environment for passengers, reduces travel fatigue, and creates favorable working conditions for the driver, ensuring safe driving through proper ventilation.
18
2
Share

What engine does the Audi R8 use?

Audi R8 uses a 5.2-liter V10 naturally aspirated engine, with a maximum power of 397kW and a maximum torque of 540Nm. The engine reaches its maximum power at 7,800 rpm and maximum torque at 6,500 rpm. This engine is equipped with hybrid injection technology and uses an aluminum alloy cylinder head and block, paired with a 7-speed dual-clutch transmission. Most sports cars use dual-clutch transmissions because they offer high transmission efficiency and fast shifting speeds, making them very suitable for supercars. The front suspension of the Audi R8 uses a double-wishbone independent suspension, and the rear suspension also uses a double-wishbone independent suspension.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.