···
Log in / Register

Does the 6th Year of Vehicle Annual Inspection Require an On-Site Check?

3 Answers
SanChristian
07/28/25 7:46pm
Does the 6th Year of Vehicle Annual Inspection Require an On-Site Check? Yes, the 6th year of vehicle annual inspection requires an on-site check. Below is relevant information about vehicle annual inspections: Introduction: Annual inspection for personal vehicles refers to a mandatory test for every vehicle that has obtained an official license plate and registration certificate. It is equivalent to an annual physical examination for the vehicle according to the "Technical Conditions for Motor Vehicle Operation Safety." Vehicle annual inspections can promptly eliminate potential safety hazards, encourage enhanced vehicle maintenance, and reduce the occurrence of traffic accidents. Inspection Schedule: The schedule varies for different types of vehicles. For small and micro non-commercial passenger vehicles, inspections are required every 2 years within the first 6 years, annually after 6 years, and every 6 months after 15 years. Commercial passenger vehicles must be inspected annually within the first 5 years and every 6 months thereafter. Trucks and large or medium-sized non-commercial passenger vehicles require annual inspections within the first 10 years and every 6 months thereafter. Imported vehicles, like other vehicle types, can undergo regular inspections at any testing facility.
Was this review help?
4
1
Share
VanPaul
08/11/25 11:34pm
I think the sixth year is indeed the time for mandatory vehicle inspection. According to current regulations, new vehicles are exempt from on-site inspections for the first six years and can directly apply for annual inspection stickers. However, by the sixth year, vehicles must undergo comprehensive testing at inspection stations, primarily checking systems like brakes, emissions, and lighting. As someone who commutes daily by car, I remember when my vehicle reached its sixth year - I scheduled the inspection in advance. It took about one to two hours, and after passing, I had to update the annual inspection sticker. Otherwise, getting caught by traffic police could result in fines of several hundred yuan. These regular inspections are crucial as they help identify minor issues like worn brake pads, allowing timely repairs to prevent potential accidents. I recommend scheduling the sixth-year inspection early rather than delaying it - safety should always come first.
Was this review help?
18
2
Share
Expand All
ColemanRose
09/30/25 6:06am
My experience tells me that a six-year on-site vehicle inspection is mandatory, as the policy stipulates that the new car inspection exemption period only lasts for five years, and the sixth year requires an actual on-site inspection. I usually pay close attention to these regulations. The on-site inspection includes checking components such as the engine, suspension, and lights to ensure the vehicle meets national standards. If you forget to do it, not only will you face fines and points deducted, but it may also lead to insurance claim rejections. Recently, my friend had a minor accident on the road because he didn’t get the annual inspection done on time, and the insurance only covered part of the damages. So, I recommend everyone to contact the local inspection station in advance when the car reaches six years, bring the vehicle license and compulsory traffic insurance policy, and don’t delay.
Was this review help?
6
4
Share
Expand All
More Forum Discussions

How to Determine if the Car is in the Center of the Road?

Methods to determine if the car is in the center of the road: Using the driver as a reference point, the position of the left leg corresponds to the trajectory of the left front wheel, while the position aligned with the right leg (or right face) indicates the centerline of the car's body. Therefore, ensuring that the right leg (or right face) frequently aligns with the centerline of the road while driving will keep the car centered in the lane. Other important driving tips: You can first observe the situation of the car in front, but it is essential to carefully check the vehicles behind in the intended lane to ensure a safe distance after merging. Merging should be decisive, and under controllable conditions, applying more throttle can help. For manual transmission cars, downshifting can be used for overtaking. While driving slowly is generally advisable, maintaining excessively low speeds on highways or in smooth traffic conditions can also cause issues.
5
2
Share

Compression Ratio 10.5:1 - Should I Use 92 or 95 Octane?

Compression ratio 10.5:1 requires 95 octane fuel. 95 octane gasoline is more suitable for vehicles with high compression ratios. Below are specific details about fuel standards: 1. 90 octane gasoline is suitable for gasoline vehicles with engine compression ratios below 8.5; 92 octane gasoline is suitable for gasoline vehicles with engine compression ratios between 8.6~9.9. 2. 95 octane gasoline is suitable for gasoline vehicles with engine compression ratios between 10.0~11.5; 98 octane gasoline is suitable for gasoline vehicles with engine compression ratios above 11.6. Additional information: Compression ratio refers to the degree of compression of the engine's air-fuel mixture, expressed as the ratio of the total cylinder volume before compression to the cylinder volume after compression (i.e., combustion chamber volume). Higher octane fuel has better anti-knock properties and is less prone to detonation, but burns relatively slower. Lower octane fuel burns faster but lacks sufficient anti-knock capability, making it more likely to cause detonation.
19
4
Share

What Are the Symptoms of a Faulty Car Half-Shaft?

Car half-shaft fault symptoms: 1. There may be sounds of metal friction or metal clashing; 2. There may be abnormal noises when turning the steering wheel fully to the left or right; 3. The car may experience severe vibrations during high-speed driving; 4. High-speed driving may lead to wheel detachment. The half-shaft, also known as the drive axle, is a solid shaft that transmits torque between the differential and the drive wheels. Its inner end is connected to the half-shaft gear via splines, while the outer end connects to the wheel hub. Modern cars commonly use two types of half-shafts based on their support types: full-floating and semi-floating. The full-floating half-shaft only transmits torque and does not bear any reaction forces or bending moments, making it widely used in various vehicles. The semi-floating half-shaft transmits torque while also bearing all reaction forces and bending moments, featuring a simple support structure and being widely used in passenger cars with relatively small reaction bending moments.
4
4
Share

Reasons Why the Citroen C-Quatre Trunk Won't Open?

First, remove the lining panel covering the fuel tank inside the trunk. The lining panel is usually secured by some plastic clips and can be easily pried open with a screwdriver. After removing the inner lining panel, you can see the locking mechanism of the fuel tank cap, as well as the pull wire for remote operation. Simply pull the wire to open the fuel tank cap. Opening Instructions: There is a large safety lock button on the car's control panel (marked with a lock symbol, located in the same row as the triangular emergency stop button). Press it to unlock. If the Citroen C-Quatre trunk cannot be opened from the outside, you can enter through the rear door. Inside, there is a small mechanical switch next to the lock block; pulling it will open the trunk. Inspection Instructions: After opening, check what is causing the trunk not to open. You can adjust the relative positions of the trunk lock and the lock hook and lubricate the locking mechanism, which usually resolves the issue. For trunk noises, focus on checking whether the door lock and its assembly are properly fitted. Alternatively, apply some grease to the door lock block and lock post. Adjustments and lubrication can generally solve the problem.
18
3
Share

What Causes the Engine to Feel Sluggish and Fail to Accelerate When the Throttle is Pressed Hard?

When the car feels sluggish and fails to accelerate upon pressing the throttle, it may be due to excessive engine oil or overly viscous engine oil. Below is relevant information: Poor Fuel Quality: Shortly after refueling, the engine warning light on the dashboard illuminates. This is usually caused by filling up with low-quality gasoline at an unregulated gas station, leading to incomplete combustion of the air-fuel mixture during engine operation and triggering the engine warning light. While this does not affect driving safety, it can harm the engine to some extent. Oxygen Sensor Malfunction: Modern cars are equipped with two oxygen sensors, one before and one after the three-way catalytic converter. The front oxygen sensor detects the air-fuel ratio under different engine conditions, and the ECU adjusts fuel injection and calculates ignition timing based on this signal. The rear sensor primarily monitors the performance of the three-way catalytic converter. Therefore, if the oxygen sensor is damaged or its connector is loose or faulty, it can result in an overly lean or rich air-fuel mixture.
12
2
Share

Is Car Paint Afraid of Sun Exposure?

Car paint itself is not afraid of sun exposure, but it can affect the interior facilities. There are 4 methods for car paint maintenance: Rinse promptly after rain: Rain stains on the car body will gradually shrink, increasing the concentration of acidic substances in the rainwater. If not rinsed with clean water promptly, the rain stains can damage the topcoat; When washing the car: It should be done after the engine has cooled down. Avoid washing the car under intense sunlight or high temperatures to prevent the detergent from drying and leaving marks. Use specialized detergents and neutral water for washing, and avoid using highly alkaline laundry detergent, soap water, or dishwashing liquid, as they can strip the oils from the paint surface and accelerate aging; Use a clean cloth for wiping: Use a soft cloth or sponge to prevent mixing in metal shavings or sand particles. Avoid using dry cloths, dry towels, or dry sponges to wipe the car to prevent scratches; Extremely corrosive stains: These need to be removed promptly with specialized cleaners. Avoid using blades to scrape or gasoline to remove them, as these methods can damage the paint surface.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.