···
Log in / Register

Does the 6-year exemption from inspection include the 6th year?

4 Answers
SanGenesis
07/30/25 1:44am

6-year exemption from inspection includes the 6th year. The following is an introduction to the relevant content of the 6-year inspection: 1. Obtain the inspection mark: After the expiration of the 6-year exemption from inspection, the vehicle owner needs to go to the traffic management department to obtain the inspection mark every 2 years. 2. Scope of 6-year exemption from inspection: Vehicles exempt from inspection for six years are non-operational large cars, light cars, and micro passenger cars. If the vehicle does not belong to these types, it needs to be inspected on time. When the vehicle is inspected, the vehicle driving license, the owner's ID card, and a copy of the compulsory traffic insurance within the validity period must be carried, and the vehicle must have no violation records before the inspection can be carried out. Three months before the annual inspection date of the motor vehicle, the inspection application can be accepted for annual inspection. It is best to do it 2 months or 1 month in advance, and don't wait until there are only a few days left before the expiration of the annual inspection to think about the inspection. In addition, before the 10th of each month, the workload of the inspection station is relatively small, which is a good time to pass the inspection without queuing. In the middle of the month, the number of vehicles gradually increases, and the end of the month is the peak period.

Was this review help?
5
1
Share
DiCorey
08/15/25 7:33am

Yes, the 6-year exemption from inspection includes the sixth year. This means that from the time your new car is registered, the first six years of inspection are relatively easy. By the sixth year, you still don’t need to take your car to the inspection station for an on-site check. You only need to apply for the inspection compliance label directly through the Traffic Management 12123 App or at the vehicle management office. I remember when I bought my car a few years ago, this was exactly how it worked—the sixth year was incredibly hassle-free, saving me the time of queuing for an inspection. However, it’s crucial to note that the exemption starts from the second year, requiring you to obtain the label every two years. Don’t forget to apply by the sixth year—overdue applications might result in fines. Here’s a little tip: although the sixth year is exempt from on-site inspection, you must apply for the label on time because it signifies that your car is basically compliant and free of major issues. Starting from the seventh year, you’ll need to go to the inspection station properly, which will involve higher costs and more time. So, I recommend setting a calendar reminder to avoid missing the application deadline. In short, the sixth year is entirely within the exemption period—enjoy the last stretch of convenience!

Was this review help?
1
4
Share
Expand All
LaJourney
10/21/25 2:09am

Yes, it includes the sixth year. I just handled the sixth-year exemption inspection for my car, and it was incredibly easy. Specifically, the 6-year exemption inspection policy means that the second, fourth, and sixth years after the car is registered are all exempt from on-site testing. So, when you reach the sixth year, you still don’t need to drive your car to queue for inspection—just fill out an application online or visit the vehicle management office to collect the inspection sticker. I got it done last month, and the whole process took less than ten minutes—saving time, money, and hassle. This policy is quite user-friendly, as new cars usually don’t have major issues in the first few years, and the focus is on convenience for car owners. A reminder: make sure to get the sticker by the end of the sixth year, because the seventh year will require an in-person inspection, where you might encounter checks for brakes, lights, or other issues. I recommend checking the official traffic management website for requirements in advance to avoid mistakes, as inspection policies may occasionally change, and details might vary by region. In short, the sixth year is included in the exemption—just relax and handle it with ease.

Was this review help?
20
2
Share
Expand All
McAmir
12/04/25 2:36am

Yes, including the sixth year. The 6-year exemption from inspection is designed this way, covering the sixth year of a new car. At that time, you only need to apply for an inspection sticker without having to take the car to the inspection station for hassle. As an ordinary family car user, I think this policy is quite considerate—saving time for things like picking up and dropping off kids at school means a bit more sleep. The key is to remember not to delay the sixth-year sticker application too long, as fines could apply. Regular maintenance is usually sufficient for the sixth year, but minor bumper scratches might need fixing first to avoid issues with the application. From the seventh year onward, you’ll need to spend some money on inspections, so I prefer planning expenses ahead. Safety first—just confirm it includes the sixth year, and you’re good to go.

Was this review help?
20
3
Share
Expand All
More Forum Discussions

How many electric motors does the Ferrari SF90 have?

The Ferrari SF90 is equipped with three electric motors, distributed on both the front and rear axles, and utilizes a ternary lithium-ion battery. These three motors, combined with a 3.9T twin-turbocharged engine, deliver a combined power output of 735 kW and a combined torque of 900 Nm. The drivetrain features a mid-engine layout with all-wheel drive (AWD), specifically an electric all-wheel-drive system. The Ferrari SF90 is a sports car introduced by Ferrari, with dimensions of 4704 mm in length, 1973 mm in width, and 1191 mm in height, and a wheelbase of 2650 mm. Both front and rear brakes are ceramic ventilated discs, and the body structure is of a unibody design. The front tire specification is 255/35R20, while the rear tire specification is 315/30R20.
12
4
Share

Do You Need to Press the Accelerator When Reversing in an Automatic Transmission Car?

When reversing in an automatic transmission car, you generally do not need to press the accelerator. Simply shift into the R (Reverse) gear and release the brake, and the car will move backward automatically. However, in certain situations such as when on a slope or when the wheels are on a speed bump, the idle power of the engine may not be sufficient to overcome the resistance. In such cases, you may need to lightly press the accelerator to assist in reversing. An automatic transmission eliminates the need for the driver to manually shift gears, as the vehicle automatically selects the appropriate gear based on speed and traffic conditions. Typically, automatic transmission cars have six gear positions, arranged from top to bottom as: P (Park), R (Reverse), N (Neutral), D (Drive), S (Sport), and L (Low).
16
4
Share

Where is the tire pressure reset button on the Great Wall Pao?

The tire pressure reset button for the Great Wall Pao is the SET button on the central dashboard. Tire pressure reset is an operation performed on the tire pressure monitoring system to reset it after addressing a tire pressure fault. There are generally three reasons for abnormal tire pressure: Abnormal tire pressure: The system typically alerts when the pressure is below 1.8 bar or above 3.0 bar. In such cases, tire inspection and pressure adjustment are required. Failure to reset the tire pressure monitoring: After inflating the tires, if the tire pressure is not reset promptly, the monitoring system will retain the previous data, causing the tire pressure warning light to illuminate. Simply performing a tire pressure reset will resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged due to impact while driving, it can trigger the tire pressure warning light. In case of sensor damage, the only solution is to replace it with a new component.
13
5
Share

Can Green and Red Antifreeze Be Mixed?

Whether green and red antifreeze can be mixed depends on the brand and composition of the antifreeze. Antifreeze of different brands or compositions should not be mixed. This is because the production formulas of antifreeze from different brands may vary, and mixing them could lead to chemical reactions between various additives, rendering them ineffective. Antifreeze is a type of coolant containing special additives, primarily used in liquid-cooled engine cooling systems. It offers excellent performance in preventing freezing in winter, boiling in summer, and resisting scale and corrosion year-round. It also prevents the coolant from freezing and expanding in cold winters, which could otherwise crack the radiator or damage the engine cylinder block or head. The main components of antifreeze are: 50% pure water, 40% methanol, and 10% other substances. It is generally categorized into three types: ethanol-water, glycerol-water, and ethylene glycol-water.
18
1
Share

Is Braking Distance the Same as Stopping Distance?

Braking distance is indeed stopping distance, so the faster the vehicle speed, the longer the braking distance (stopping distance). Braking distance is one of the key parameters to measure a vehicle's braking performance, consisting of two parts: reaction distance and braking distance. Below are the relevant explanations: Reaction Distance: The distance traveled by the vehicle from the moment the driver notices a situation and intends to stop until the brake pedal is pressed and braking action begins is called reaction distance. Reaction distance depends on the driver's level of concentration, technical proficiency, and the vehicle's speed. Higher concentration and better technical skills result in a shorter reaction distance, while the opposite leads to a longer reaction distance; the faster the vehicle speed, the longer the reaction distance, and vice versa. Braking Distance: The distance traveled by the vehicle from the moment the driver presses the brake pedal and braking action begins until the vehicle comes to a complete stop is called braking distance. The length of the braking distance is related to the vehicle's speed, braking force, coefficient of friction, etc. The faster the speed, the longer the braking distance—for example, doubling the speed increases the braking distance by four times. The greater the braking force, the shorter the braking distance, and vice versa.
18
5
Share

Why is there a hump in the middle of the back row in some cars?

Some cars have a hump in the middle of the back row because: for the flatness of the chassis, as the car's underbody is equipped with an exhaust pipe or drive shaft, usually rear-wheel-drive cars must transmit the engine's power to the rear wheels through the drive shaft, so structurally, such a hump is necessary. The hump between the front and rear seats from front to back is a structural design intended to enhance the longitudinal rigidity of the cabin, while also providing space for the exhaust pipe to run backward without affecting the chassis's ground clearance. If the chassis were a flat steel plate, it would easily "fold" upon impact. However, if the chassis is designed with a semi-circular hump, its ability to withstand impact can be many times stronger than a flat steel plate, and it is less prone to deformation. This is similar to adding a steel beam to the chassis.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.