Does the 4S shop's free full car film include the car body?

2 Answers
VonAnnie
07/25/25 3:24pm
4S shop's free full car film does not include the car body. Here is an introduction to car film: 1. Introduction: Car film is a thin film applied to the front and rear windshields, side windows, and sunroof of a vehicle. This film is also known as solar film or heat insulation film. 2. Function: Its main functions are to block ultraviolet rays, reduce heat, prevent injuries caused by shattered glass, reduce glare, and protect personal privacy through its one-way visibility feature. 3. Thickness: The thickness of car heat insulation film is usually around 1.5 mil. Mil is an imperial unit, where 1 mil equals one-thousandth of an inch, or 0.0254 mm.
Was this review help?
10
0
Share
McIsabel
08/11/25 9:27pm
I just encountered the same thing when picking up my car at the 4S店. The so-called 'full car film' mentioned by the salesperson actually refers to window tinting film, which only covers the front and rear windshields plus the four side windows—it definitely doesn't include the car body. Body films are either color-change wraps or PPF (paint protection film), which cost way more. What they give you for free is most likely just the window film. I had to specifically ask, and the salesperson hesitantly admitted that body wrapping would cost extra. Later, I found out the free film they provided was of terrible quality—it started bubbling within three months. My advice: make them clearly specify the coverage in writing before signing the contract, otherwise you'll definitely face arguments when picking up the car.
Was this review help?
16
0
Share
Expand All
More Forum Discussions

When should a new car undergo its first maintenance?

New cars should undergo their first maintenance after driving 3,000 to 5,000 kilometers or 3 to 5 months. The first maintenance for a new car includes the following items: 1. Check the engine's working condition, such as whether the pipe connections are normal, whether there are any leakage points, whether the engine sound is normal, and whether there are any abnormal noises; 2. Check whether the coolant level is within the normal range; 3. Check the wear degree of brake pads and tires, as well as the tire pressure condition; 4. Check whether there are any scratches or corrosion on the chassis components; 5. Check the remaining amount of power steering fluid and whether there is any oil leakage at the oil pipe interfaces; 6. Thoroughly clean the vehicle, including the engine compartment, body, and interior.
12
4
Share

What engine does the Beijing X3 use?

Beijing X3 uses two engines, one is a 1.5-liter naturally aspirated engine, and the other is a 1.5-liter turbocharged engine. The maximum horsepower of the 1.5-liter naturally aspirated engine is 116 horsepower, and the maximum torque is 148 Nm; the maximum horsepower of the 1.5-liter turbocharged engine is 150 horsepower, and the maximum torque is 210 Nm. In terms of appearance, the Beijing X3 uses a MacPherson independent suspension for the front suspension and a torsion beam non-independent suspension for the rear suspension. The body dimensions of the Beijing X3 are 4325mm in length, 1830mm in width, and 1640mm in height, with a wheelbase of 2570mm. The maximum horsepower of the engine equipped in this car is 150Ps, the maximum power is 110kW, and the maximum torque is 210Nm.
3
0
Share

What is the coolant bleeding method for the Baojun 560?

The coolant bleeding method for the Baojun 560 involves first ensuring that the old coolant is mostly drained out. Then, slowly fill the radiator to the top, followed by filling the overflow tank to the top without replacing the radiator cap. At this point, start the engine and let it idle until it reaches normal operating temperature. As the coolant begins to circulate through the system, the engine will automatically expel any air trapped in the coolant passages. Coolant is a liquid containing special additives, primarily used in liquid-cooled engine cooling systems. The Baojun 560 measures 4670mm in length, 1810mm in width, and 1755mm in height, with a wheelbase of 2750mm. The front track is 1554mm, and the rear track is 1549mm. The vehicle's engine delivers a maximum horsepower of 150Ps, a maximum power output of 110kW, and a maximum torque of 230Nm.
12
1
Share

What are the effects of car coolant leakage on the engine?

Car coolant leakage can have the following effects on the engine: 1. Cause the engine to overheat; 2. Lead to cylinder scuffing, wear, and irreversible damage; 3. Corrode components inside the engine compartment. The functions of car coolant include: 1. Preventing engine damage due to overheating in summer by achieving cooling effects; 2. Preventing the cooling system from freezing and cracking after prolonged parking in winter. It is important to note that water should not be added when topping up coolant. Coolant itself contains anti-corrosion substances, and diluting it with water or adding water can cause cooling system malfunctions, and in severe cases, may even lead to component corrosion.
6
3
Share

What is the appropriate tire pressure in winter?

Winter tire pressure is appropriate between 2.6bar and 2.7bar. If the tire pressure is too high, it will reduce the contact area between the tire and the ground, leading to poor tire grip. If the tire pressure is too low, the tire may experience wave deformation during high-speed driving, which will reduce the tire's service life and increase the risk of a blowout. Tire pressure refers to the air pressure inside the tire. In car maintenance, the engine is the heart of the car, and engine damage will lead to the end of the car's life. Similarly, tire pressure is the blood pressure of the car, and the level of tire pressure plays a very important role in the performance and power of the car.
10
2
Share

What to Do When the EPC Light Is On and the Car Won't Start?

Solutions for the EPC light being on and the car not starting: 1. Clean the throttle body and use fuel that meets quality standards; 2. Remove carbon deposits from related parts; 3. Rewrite the ECU-related data. Reasons for the EPC light being on include: 1. Intake system failure, such as leaks or blockages; 2. Dirty throttle body with excessive carbon deposits; 3. Use of substandard fuel; 4. Abnormal cylinder pressure and poor working condition; 5. Sporadic faults or false alarms; 6. Valve failure, sticking, or carbon buildup; 7. ECU failure. EPC stands for Electronic Power Control (electronic throttle), and in vehicle maintenance, faults indicated by the EPC light are relatively common.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.