Does the 2021 RAV4 Have Roof Rack Mounting Holes?

What is the reason why the interior light stays on and cannot be turned off?

The reasons why the interior light stays on and cannot be turned off are as follows: 1. It may be in the always-on mode: Generally, there is a button next to the light on the top of the cabin with three modes, namely ON (always-on mode), DOOR (light turns on when the door opens and off when it closes), and OFF (off mode). It is usually set to DOOR mode, where the light automatically turns on when the door is opened and off when it is closed. If the button is set to ON, the light will remain on and needs to be manually turned off. 2. The light on the top of the cabin may not turn off if the door is not properly closed, so the door status should be checked: Some car interior lights can be pressed to turn on or off, a feature many car owners are unaware of. You can try pressing the light on your car's ceiling to see if it operates this way.

10

0

Share

Is a Faulty Transmission Valve Body Considered a Major Overhaul?

Below are the key indicators that an engine requires a major overhaul: 1. Cylinder pressure difference: The cylinder compression pressure should meet the original design specifications. Use a tachometer and cylinder pressure gauge to check. If it does not meet the requirements, it is considered unqualified. The pressure difference between each cylinder should not exceed 8% of the average pressure of all cylinders. Measure with a tachometer, cylinder pressure gauge, or engine diagnostic analyzer. When the cylinder pressure of a Hyundai Elantra engine falls below its standard value, severe black smoke emission may occur. 2. Significant idle fluctuation: The engine should run stably at idle speed, with the speed conforming to the original design specifications. The speed fluctuation should not exceed 50 rpm. Conduct a running test with a tachometer or measure with an engine diagnostic analyzer. 3. Low power: The engine's maximum power should not be less than 90% of the originally designed rated value. Measure with a dynamometer according to relevant regulations. 4. Fuel consumption rate: The engine's minimum fuel consumption rate should not exceed the original design requirements. Measure with a fuel consumption meter. 5. Low torque: The engine's maximum torque should not be less than 90% of the originally designed rated value. Check with a dynamometer according to relevant regulations. Severe loss of working capacity should prompt a major overhaul.

3

1

Share

What to Do When There is a Shock When Starting in D Gear with an AT Transmission?

Here is an introduction about the shock when starting in D gear with an AT transmission: 1. The engine speed is too high. For example, when the engine speed is too high during a cold start, the torque converter will transmit more power, resulting in a greater impact force and more noticeable shaking when shifting gears. 2. The brake is not pressed firmly. When shifting gears, the engine's power is directly transmitted to the wheels. If the brake is not pressed firmly, the wheels will slightly move, causing the vehicle to suddenly move forward with a strong shaking sensation. 3. Releasing the brake too early when waiting at a red light. When the light turns green, shifting into drive and releasing the brake to start moving can cause the vehicle to suddenly lurch forward violently. This happens because the brake is released too early, causing a sudden combination of power.

6

2

Share

What does the Auto button in the car mean?

Auto translates to "automatic" in English. Here is more information about the Auto button in the car: 1. Auto switch for automatic air conditioning: On an automatic air conditioning system, pressing the Auto switch allows the air conditioning to automatically adjust the temperature and airflow inside the cabin. 2. Auto switch for wipers: If there is an Auto switch on the wiper control, it indicates that the vehicle is equipped with rain-sensing wipers. Setting the wiper to the Auto position enables the wipers to detect the size of raindrops via a rain sensor and automatically adjust the wiper speed. 3. Auto switch for lights: An Auto switch for lights means the vehicle has automatic headlights. When the light switch is set to the Auto position, the headlights can sense changes in ambient brightness via a light sensor and automatically turn on when it gets dark outside. 4. Auto switch for windows: The Auto switch on the driver's door window control indicates one-touch up/down functionality. Pressing the Auto switch all the way down and releasing it will automatically open the window completely, while pulling the Auto switch all the way up and releasing it will automatically close the window completely. To stop the window midway, pull or press the Auto switch in the opposite direction and release it. 5. Autohold switch: Located near the gear lever, the Autohold switch (sometimes simply labeled as Auto or with a circle containing an "A" symbol) activates the automatic parking brake function. This feature automatically applies the handbrake when the vehicle is temporarily stopped, such as at a traffic light, eliminating the need to manually engage the handbrake.

18

2

Share

What does engine stall mean?

Engine stall refers to an uncontrollable process, whether caused by human factors or not, during the engine's operation. It manifests as the output speed of the torque converter being zero while the engine is running during normal driving, meaning the pump wheel rotates while the turbine remains stationary. Common causes of engine stall include the following: 1. Air leaks in the intake system, such as leaks in hoses and connections, PVC valve leaks, EGR system leaks, leaks at the dipstick socket, or leaks at the oil filter cap. 2. The air filter element is excessively dirty. 3. The air flow meter is not functioning properly. 4. Unstable fuel supply pressure in the fuel injection system. 5. Incorrect ignition timing. 6. Poor performance of the cold start injector and temperature timing switch. 7. ECU malfunction.

12

1

Share

What Causes Steering Wheel Shaking When Braking at High Speeds?

The reasons for steering wheel shaking when braking at high speeds are as follows: 1. Uneven brake disc wear: When the brake discs wear unevenly, steering wheel shaking may occur during high-speed braking. When the car reaches a certain speed and brakes, the left and right wheels on the same axle may experience asynchronous braking forces within a single rotation, leading to an imbalance in braking torque. This imbalance causes a pulsating effect—alternating between tight and loose braking. If this imbalance reaches a certain level, it can result in unequal rolling speeds between the left and right wheels, leading to lateral wheel oscillation, which is then transmitted to the steering wheel. 2. Drivetrain malfunction: Another possible cause of steering wheel shaking during high-speed braking could be an issue with the vehicle's drivetrain. In such cases, it is advisable to inspect components like the tie rods and tie rod ends for signs of rust or looseness.

12

4

Share

Does the 2021 RAV4 Have Roof Rack Mounting Holes?

What is the reason why the interior light stays on and cannot be turned off?

Is a Faulty Transmission Valve Body Considered a Major Overhaul?

What to Do When There is a Shock When Starting in D Gear with an AT Transmission?

What does the Auto button in the car mean?

What does engine stall mean?

What Causes Steering Wheel Shaking When Braking at High Speeds?

What is the Function of a Car Exhaust Valve?

How to input the theta symbol in a VIN?

What does it feel like when ABS engages during braking?

What is the difference between wet clutch and dry clutch?