Does the 2021 Nissan Qashqai have the one-touch window lift function when locking the car?

2 Answers
MacVincent
07/24/25 4:22am
2021 Nissan Qashqai models are equipped with the one-touch window lift function when locking the car. Below is the relevant introduction: Definition: One-touch window lift refers to a system where the car window glass can be controlled to fully open or close with a single press of a button. The Qashqai has this feature, allowing the window to automatically open or close completely after the owner presses and releases the switch. Purpose of one-touch window lift: Nowadays, most mid-to-high-end models are equipped with the one-touch window lift function, primarily for the convenience of drivers and passengers, and to avoid distractions caused by manually operating the windows, thereby improving safety. One-touch windows generally come with an "anti-pinch" feature to prevent the risk of pinching hands.
Was this review help?
2
4
Share
AshlynLee
08/11/25 12:00am
The 2021 X-Trail does indeed feature the window roll-up function when locking the car, which I have used while driving. This feature is usually standard on high-end models, and the operation is quite simple: press and hold the lock button on the remote key for about 2-3 seconds, and all windows, including the driver and passenger side, will automatically roll up and close. This is particularly convenient for situations where you forget to close the windows after parking. From my experience, it requires continuous pressing to work. If there is no response, it might be due to the vehicle settings not being activated or weak battery power. I recommend checking the manual or enabling it in the car's menu. The X-Trail's feature is more stable compared to some competitors like the Honda CR-V, and it avoids the risk of accidental pinching for safety. However, it's essential to develop a habit of checking after use. Overall, it's a practical little detail that enhances daily driving convenience. If you encounter any issues, it's advisable to visit a 4S shop to debug the software version.
Was this review help?
19
3
Share
Expand All
More Forum Discussions

Can the Vehicle Management Office Handle Compulsory Traffic Insurance?

Vehicle management offices cannot handle compulsory traffic insurance. Below is an introduction to compulsory traffic insurance and the mandatory insurance system: Introduction to Compulsory Traffic Insurance: The full name of compulsory traffic insurance is "Compulsory Traffic Accident Liability Insurance for Motor Vehicles." It is a mandatory liability insurance where the insurance company compensates for bodily injury, death, and property losses of victims (excluding passengers of the insured vehicle and the insured) caused by road traffic accidents involving the insured vehicle, within the liability limits. Mandatory Insurance System: Compulsory traffic insurance is China's first mandatory insurance system implemented under national law. The insurance premiums follow a nationwide unified fee standard, as stipulated by the state. However, the prices of compulsory traffic insurance vary for different car models, with the main influencing factor being the "number of car seats."
12
1
Share

What is the maintenance interval for Mobil 1 5W30?

Mobil 1 5W30 has a maintenance interval of 10,000 kilometers or 1 year. Mobil 1 5W30 is a full synthetic engine oil, which features a longer replacement cycle. However, this cannot be generalized and should be determined based on daily usage conditions and driving habits. For example, if you frequently drive on highways, the maintenance can be delayed, but if you often drive on urban roads, maintenance can be performed earlier. The characteristics of synthetic engine oil are as follows: Oxidation resistance: Synthetic engine oil has better thermal oxidation stability than mineral-based engine oil, ensuring performance stability during long-term use. This is also one of the reasons why synthetic engine oil has a longer maintenance interval. Low-temperature fluidity: Full synthetic engine oil has low viscosity and a high viscosity index, which can save energy consumption during cold starts, accelerate oil film formation, reduce dry wear of engine components during cold starts, and extend the engine's service life.
14
4
Share

What car model features a horse-shaped logo?

The horse logo represents the Ford Mustang. Below is an introduction to the Ford Mustang: Body dimensions: The Ford Mustang measures 4794x1916x1373mm in length, width, and height. Powertrain: The Ford Mustang comes in two versions: a 2.3L and a 5.0L. The 2.3L version is equipped with a 2.3-liter four-cylinder turbocharged engine, delivering a maximum horsepower of 299 hp, maximum power of 220 kW, maximum torque of 434 Nm, and a combined fuel consumption of 8.6L/100km as per the MIIT. The 5.0L version uses a 5.0-liter eight-cylinder naturally aspirated engine, producing a maximum horsepower of 466 hp, maximum power of 343 kW, maximum torque of 556 Nm, and a combined fuel consumption of 12.2L/100km as per the MIIT.
4
3
Share

What type of engine oil should be used for Honda XRV maintenance?

Honda XRV maintenance manual recommends using SM grade or higher engine oil with a viscosity of 0W-20. Any oil meeting these specifications can be used. For later maintenance oil changes, you may choose brands such as Mobil, Shell, Castrol, or Total. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30 oil, the first number indicates low-temperature fluidity - 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, resulting in smoother cold starts for the vehicle. The latter number represents the kinematic viscosity of the oil at 100°C - higher values indicate better ability to maintain viscosity at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing Honda XRV's engine oil is as follows: Wait for the engine temperature to drop, allowing the oil to flow back to the oil pan; Loosen the drain plug with a wrench and use an oil pan to collect the old oil until no more oil flows out. Start the engine for about 30 seconds to allow the oil in the main oil passage to drain; Remove the oil filter with a special wrench; Apply some oil to the gasket of the new oil filter and tighten it clockwise by hand; Add new oil through the oil filler cap on the engine valve cover, typically filling about three-quarters of a standard oil container; Start the engine and let it run for 5 minutes, then check for leaks around the drain plug and oil filter. Repair if any leaks are found; After stopping the engine, pull out the dipstick to check that the oil level is within the standard range.
6
0
Share

How often should car air conditioning be recharged with Freon?

Car air conditioning generally needs to be recharged with Freon every 5 years. The detailed reasons for air conditioning not cooling are as follows: 1. Lack of Freon. This issue manifests as insufficient cooling compared to normal operation, rather than a complete lack of cooling. 2. Low power supply voltage. This problem shows that the air conditioning cools normally when the voltage is stable, but unstable voltage affects the cooling performance. 3. Low air conditioning power. This situation is often overlooked in daily use. Solutions generally include increasing the number of air conditioning units; improving the usage environment conditions; enhancing the airtightness of the environment; and reducing heat sources in the air conditioning environment. 4. High external ambient temperature. This lack of cooling is common when the outdoor unit is installed in a confined space or the surrounding temperature is too high. The simplest and most direct solution is to change the operating environment of the outdoor unit. 5. Long-term lack of cleaning and maintenance for the air conditioning. This situation is most easily overlooked, as air conditioning requires regular cleaning and maintenance.
3
2
Share

Can a B2 trainee drive on the highway?

b2 trainees are not allowed to drive on the highway. The following are the relevant regulations of the Road Traffic Safety Law and the order for the driver to exit the highway at the nearest exit: Relevant regulations of the Road Traffic Safety Law: Article 65, Paragraph 2 of the 'Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China' stipulates: When driving a motor vehicle on the highway during the internship period, the driver must be accompanied by a driver who has held a driving license for the corresponding or higher class of vehicle for more than three years. The accompanying driver should sit in the front passenger seat to guide the trainee driver. If there is no accompanying driver or the accompanying driver does not meet the requirements, a fine will be imposed. Order to exit the highway at the nearest exit: During the internship period, it is permissible to drive on the highway only if there is a driver with a corresponding or higher class of driving license for more than three years guiding from the front passenger seat. If there is no qualified driver accompanying and guiding, and if caught, a fine may be imposed without deducting points, and the driver will be ordered to exit the highway at the nearest exit.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.